Elegoo Neptune 2s Light Bar Led 20 20 Extrusion Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version one of Neptune 2s Light Bar
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 106
- Makes
- 0
- Views
- 707
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is generation 1 of this light bar made for the Elegoo Neptune 2s.
I couldn't find a light bar i liked so i decided to design my own. The bar uses generic sticky back led roll (10mm wide), using this you could have one, any or all colours and is cheap.
Mounts are a snug fit and require no nuts or bolt just slide on top of the extrusion (2020)
The bar has threaded holes either side and the included bolts pass through the mount and into the bar and can rotate freely.
I used a separate 12v power adapter and a latching button fitted into the front right lower 4040 extrusion cap.
Printed at 0.2 layer height with no supports. bar - cutout up, bolts - thread up, mounts - either side.
Please post makes and feedback as i will be revising the model with details and refinement.