Display Replacement Box For MK3 Bulletproof Wide Body Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box to mount instead of the display when this is mounted elsewhere, e.g. for an enclosure.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 132
- Makes
- 1
- Views
- 1,539
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a box for the Bulletproof Wide Body Kit to mount in place of the display when it is mounted elsewhere, e.g. for enclosure.
The box can also be used for the Ultimate Prusa Casing as long as the right side panel is the same as the left.
For mounting, the four M3x10 screws of the display are used, plus two more M3x10 screws to attach the cover (I actually forgot the handle on the printed model in the photos, it was added as shown in the following rendering).
Print both models as already aligned. For the cover you may need a brim.
If you like this project, check out my other designs too!