1 / 11
Fully adjustable monitor light bar with RGB — image 1
1 / 11

Fully adjustable monitor light bar with RGB

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Monitor light bar with RGB CCT led strip, wirelessly controlled from desktop.

Rating
0 / 5
Likes
29
Downloads
57
Makes
0
Views
1,429
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I designed a monitor light bar for my desk. It's my first design so I am not an expert but all parts fit close to perfect.

Cable chain and nuts are not my projects so I refer to the pages:

https://www.printables.com/pl/model/310284-ender-3-s1-cable-chain

https://www.printables.com/pl/model/45286-tp-link-tapo-c100c110-mount

 

Parts to print

1 x Wall mount

1 x Arm with chain holder (supports required)

7 x Arm

8 x Nut

2 x Double Profile cover

4 x Profile holder

4 x Top profile holder

1 x Chain profile holder (supports required)

27 x Chain with clip

 

 

Additionally you will need:

1 x 1m or 2 x 0,5m  aluminium profile (dimmensions of mine - 27x4 x 10,5mm -  LUMINES type DUAL)

1 x milk or frozen cover or similiar

1 x 1m long M8 threaded rod (splited to smaller parts)

1 x 1m RGB CCT Led strip 

1 x 2m 6pin cable for Led strip

1 x Controller (Milight FUT039s) you can use whatever you like

1 x Desk pilot (MiLight RAINBOW S2-B) also you can use whatever you like

1 x 12V power adapter (matched to the power of the led strip - mine has 36W)

4 x m5 screw - 15mm long

 

 

How to mount:

Cut led strip into two equal sections and solder it together with 5cm long separated 6pin cable for led's. On the other side solder 2m long 6pin cable. There is a space for cables in part named ‘Double profile cover’

In a center of one aluminium profile closer to the side you must drill a 5 mm hole for cable and route them inside the profile (see wiring diagram).

To connect parts I used M8 threaded rod, cutted to the right dimmensions - about 3 x 110mm and 1 x 155mm. Part called ‘Chain profile holder’ is for mount a chain to cover ugly colored cable - simple press to the profile between ‘Double profile holder’.

Tags