Prusa XL series: Sidecovers (4 designs)

I wanted to close the Printer a bit more, so i designed sidepanels to print for the XL.

The Sidepanels are Printable in one Piece on the XL WITHOUT support.

This is a work in progress. Ive had different issues trying to print it in the orientation above, because i wanted to have it in one piece. Im leaving this uploaded for others as an inspiration . Im waiting for my Prusa Filament, then going to Print the full deal (Honeycomb closed).
I also am planing on implementing 8 Nuts on each side(on the front), as preparation to use 2 Doors to close the Printer. When finished i will upload the files.
The Sidecovers are being secured by 6x m4 Screws with 15mm length. 

I also implemented a hole on the side, so you can use the Original spoolholder (and Nut) on it. 
This will allow you, to use all 5 Spools on one side of the Machine. 

Warning: Since this really is a big Print with a lot of Filament and tight tolerances, you should consider printing 1 slice horizontally and vertically, to make sure it fits with your setting. 
 

I also added a Version with the Honeycomb mounts from RostaP. You can find mounts for the Honeycomb Sidecover here:
https://www.printables.com/model/152592-honeycomb-storage-wall

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114