1 / 7
EOS2 Mobula7 canopy (should fit any "whoop" style quad) — image 1
1 / 7

EOS2 Mobula7 canopy (should fit any "whoop" style quad)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EOS2 Mobula7 canopy (should fit any "whoop" style quad) Should fit any camera with the same mounting width of 14mm

Rating
0 / 5
Likes
10
Downloads
112
Makes
0
Views
608
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one.

I did design this so that the screws with the big heads that come with the Mobula7 replacement FC and the UR65 fit this canopy.

lol it seems like I get better and better with each new canopy I design.

WARNING!!! I do use the HappyModel Whoop VTX so I did not have to really worry about the VTX fitting so if you are using a different type of VTX it may have space limitation issues, it SHOULD work just fine with a beta6/75x vtx to use with the EOS2.

In the picture where there is a red canopy and a clear canopy the red one is printed in PETG the clear one is TPU.

It comes in at 2.8 grams.

I print at 0.1mm layer height, infill doesn't matter as it is just 2 perimeters, and support.
If printing TPU then turn off retraction, TPU doesn't really like retractions being on.

Have fun and happy flying.

Tags