MK3S+ Einsy Case w/OEM Look and Feel Expanded & Reversed
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.18 – €0.22 net (excluding VAT)
For file: Prusa Small Hinge x2_0.2mm_PETG_MK3S_16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 16.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A reimagined reversed expanded Einsy case & lift-off cover, easy access and ample cable storage.
- Rating
- 4 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 2
- Views
- 491
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently.
I also have a drop-in t-nut model that I recently posted, it has snap-off printed supports built in.
I started with Prusa's MK3S+ Base and Cover STL's, then did a little chopping and rearranging.
INSTRUCTIONS: all parts printed .2mm 15% infill, print the following with supports . . . T3 Nuts, Extruder Cable Clamp and Prusa Heated Bed Cable Clamp (they'll just look nicer).
Includes the original Raspberry Pi knock-out.
Was also inspired by Martin Au's lift-off cover design, added this to original expanded Prusa MK3S+ cover.
Case to Cover screw has ability to use M3 square nut to make screw captive (optional). Big pet-peeve with OEM case.
Cover's M3 square nut-hole has tiny nubs to keep the nut captive.
Extruder cable clamp has additional hole for MMU cable
Case has mechanism to secure the 3mm strength-member from the extruder cable bundle using M3 screw and nut.