Counting matching models…
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
You can give it to your friend and tell them to tighten it, but when they start turning it right, it will just fall off of the screw.
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…
Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.
Drip bracket remixed to make it a bit more ergonomic to use
I decided to make a simple remix of the original Ulvheim A1 building base to complement PhysUdo's Ulvheim Building Demonic Ritual (upper floor): https://www.thingiverse.com/thing:3321919 I wanted to make the building with the pentagram…
Same model as Avise's model "Galaxy Watch 5 Charging Stand, just mirrored so the cable faces the right side.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…
This is a remix of a design by MidnightTinker. If they're on here and I'm not linking I apologize. This is meant to be worn on your belt to hold a keychain but it could be used for other utilities. The original design was an S shape, I…
This stand looks awesome, but the way the cables hanged in the side of my monitor made my eyes twitch. At first I thought I could just mirror the model but I had to cut the hole for the reset button, I did my best with my limited Blender…
Printed in SUNLU PLA+ on the centauri carbon. Default settings with 3 walls and 20% grid infill.
Same as the original, just reversed with the big hole towards the shifter.
Put your headset on this nice desk clamp - very easy to print!
Thanks for sharing from the author Follow me for other drawings that may be useful to you. Happy Printing
This is a remix, thanks for the original ( https://www.thingiverse.com/thing:3121052 by lab27). I was pleased with the camera mount, but not with the viewing angle. So my only contribution to the project is the reversed camera mounting,…
This is a quick mount for 35x15 din rails to be mounted in a 2020 extrusion. This is used for mounting my MotherBoard SKR1.3 and Raspberry PI to the back of my Ender5 printer.
Modified the model to make printing easier - no support required Works best at 0.2mm layer height.
Melted original and decided to print them myself. CF nylon, 0.3mm nozzle, 0.1mm layer hight and fits perfectly.
NOTE: There's a remix of this model by Habag111 that allows the M3 nut cutout to be printed without support. Please check it out here The original belt fastener gave me 2 problems: Not a lot of clearance between the bearing stack and the…
A link for the coupler blocks and mmu board mount. https://github.com/Tyler8299/CottonTail-Lite
A remix of https://www.thingiverse.com/thing:4522208 for proper dust collection air flow. Added is a fitting to mate up to a generic 2 1/2" dust port. funnel_male_chamfered.stl was added for printing round side down on a raft. With a…
One common application of the Sennheiser's MD 421 microphone is to record toms. The original mic clip does not work well with drum mic clamps as it is too close to the drum skin. Instead, it usually ends up using a mic stand to orientate…
This is a remix of https://www.printables.com/model/1152296-solder-scroll-for-standard-spools Print settings are the same as the original. Changed the spool position for comfort.
This 3D printing model is a remix of the original hand grip designed by Bambu Lab to attach to the blade provided with Bambu Lab printers for easy removal of printed objects from the build plate. Its ergonomic design ensures a comfortable…
Oriface created this meme-worthy Gnome and I saw someone in a 3D Printing group print it with layer shifting, placing the head on the hand. That gave me idea, and Voila! Category: Art
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
I wanted the rPi ports available on the back side instead of the front, so I flipped everything around. Original model claims to support Pi models 2B/3B/4B/5B; I've tested with a 5 and it fits well. In the future, I might make bring the…
Reversed belt grabber for Eva 3 toolhead The reversed belt grabber is needed for example in VZBOT Dont forget to like it <3 Eva 3 page: https://main.eva-3d.page/ --- Commercial Use --- By purchasing this design on Cults , you support my…
RAMBo board inverted. It can't attach the Raspberry Pi directly to the enclosure. It also reinforces the frame. It prevents the sleeve of the extruder cable from slipping out. See my blog for more information. (it's Japanese) Print…
Swapped the holder around so that the clip is meant to attach from behind. This way, the guide is clear of the print head at the top of the Z-axis when using it as a reverse bowden.
The original bottom panel can be used with reversed electronics bay mod.
Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…
This version of the Clicky Rotate Counter has two changes. The wheels only click once each time you change the number. The number order on the wheels is reversed. For example, if you want to increment the left dial, on the original…
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
Info: end point for articulated arm by Jack it is reversed - articulated arm male joint is inserted in the bottom, so on the top, you can place any hook that fits your requirement like I wanted hooks for our electronic babysitter/nanny…
Here is a screw with a double reverse thread. Two nuts with opposite pitches can be placed on this screw. Voici une vis avec un double filetage inversé. Deux écrous avec pas opposés peuvent se mettre sur cette vis. Category: Engineering
A porting for the 1.3 Gryphon platform of the reverse Angled Talon magwell designed by Ehdrien. Just like the original there isn't a mag release, only a mag detent so no tactical reloads and you'll need to load the angled Talons…
remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153
Had the headers soldered on the other side, so I changed to hole in case to fit this.
This is a remix of the R4 buffer MMU version by Filmmax. I have it mounted facing forward so I wanted the numbers to go from left to right instead of right to left. This upload only includes the faceplate and the numbers, you'll need to…
I liked the idea of clevere's wall mount, but I needed it reversed. I also added a few small filets. I printed with Prusament recycled PLA and mounted it with VHB tape.
The standard Hero Me Gen 6 lgx lite adapter has the motor facing forward. I wanted to be able to watch those beautiful large gears moving and also see the logo from the lgx lite from the front. You will have to mount the lgx lite to the…
This is a remix of https://www.thingiverse.com/thing:4192895 which in turn is a remix of https://www.printables.com/it/prints/1802-embiggened-braced-reversed-prusa-mk3-einsy-enclosu I removed “Prusa Research” logo and created bigger…
I reversed the tip to try and narrow the spool holder footprint for smaller dry boxes, but unfortunately other components require modification to be able to switch the clip orientation. The Main arms will need to be narrowed in order to…
Artistic reversed Spiked Tile
I've been working on a personal lightweight 1s analog toothpick and I found myself enjoying its flight performance. I thought that I should give it a new canopy - something new and different from the recent canopies I've put out. I…
This hook is designed to secure the topside of a Velleda whiteboard to a Skädis board. Used with https://www.printables.com/fr/model/907311-skadis-hook-for-velleda-board, it creates a “pocket” so that the whiteboard is held to the Skädis…
I built this for a pi 4 and per the spec sheets, this should fit a pi 3 and pi 5, but never tested. I did add a few holes to expose the power and activity lights for the Pi board so you can see if it's actually on and doing things.…
Modified version of the cable clips so that they can support tension or loading of a pair of clips.
Aside from reinforcing the clamp, the magazines now point in opposite directions. This is to allow for reload by spinning the pair, and based on how you setup your pair the spare magazine will always be on the left or right side (your…
Edit 2025-11-17: Unfortunately, the two separate retaining tabs loosened themselves after a while, resulting in an annoyingly rattling sound and the headlight's height not staying put. So I combined both the mount and the tabs in one…
I accidentally used the other side of the frame to connect the legs and arms, and only realized when I was about to attach on the phone support bits to the frame. The model leaves enough room for a USB-C/Micro USB/Lightning Port to fit…
Belt grabber with teeth on the opposite side for printers with flipped belts or custom Y assembly.
Custom Sized Cat Liter Box and reversed 17X17X17 with handle, opening and reversed.
Artistic reversed Pyramid Tile
Adapter to attach a reversed Pentax K-mount lens to a Neewer macro led ring light. Like the lens cap this is remixed from, the k-mount tolerances are fairly tight, so some manual cleanup may be required to allow this to install smoothly.…
Just a reversed set of teeth for https://www.printables.com/model/633650-vise-miniature-holder-for-painting
Remix (reversed version)
Thanks to Gregoire Saunier for his original work on the bear upgrade. This is a very minor change from a hex cutout to a circular one in order to screw the bearings from the bottom of the Y carriage instead of the top in order to make…
This fits the Mauker modular 19-inch racks . The original shelf the hex is for left side of 1U racks, but I needed one where the hex is on for shelves hanging from the right side of the rack. Honeycomb pattern only.
A way to display art that may be on the reverse (top/"grip side") of a skateboard. The pins fit standard new boards. There's a slot for screws on the back. Easiest way to install is to insert to mounts into your board, and then slide them…
This allows two vertical badges to be held in a single lanyard with ease! No Supports needed WARNING: The locking badgeholder requires the badge to be slightly flexed to insert or remove. Be careful not to overflex your badge. If you want…
This is a slightly modified, to allow the cover to be flipped around, easier to stick with more surface,
dteng's magnetic top cover was just what I was looking for - easy access to the extruder, simple on/off, it's just about perfect! But, being as weird as I am, I had to have the slider move to the right for “Close”, not “Open”… so, more…
Reversed screw orientation on the arm backplate, as I didn't have screw with exact length to make contact with nut, and not to obstruct quick release mechanism.
Remix of lennertvdkort's Y-axis tensioner for the AM8. It moves the mounting flange to the front and adds a cutout for the idler wheel. This allows the for the use of shorter screws and lets the idler sit closer to the frame gaining about…
Swapped screw mounts from Olafelch's design to mount at the rear.
This is a SSD/HDD (reversed) mounting bracket for Fujitsu Futro S740 or S7010 thin clients. It is used to mount the 2.5" drive in the case. I needed a reversed version as I am using the internal SATA (after adding power connector, SATA…
After I purchased and installed this fridge in my apartament it turned out that the stock handle would either collide with the cupboard next to the fridge or, if mounted the other way, collide with the windowsill, making it impossible to…
Combined the Reversed Scraper Holder by lirex with a HSW so that I could easily attach it to my own full sized HSW on my BambuLab P1S.
Reversed toilet paper holder. -I printed it with PETG. -Printed with 3 walls and 25% infill. -No supports and no brim. -The base was attached using double-sided tape, and it holds very firmly.
As a part of my new fillament spoolholder system, I chose to use the Wider and narrower remix spool holder , which is a remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model…
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
Reversed box to have cables on other side than original model
Clips for IKEA SÄTTNING cable management box with lid made to use two boxes in order to make one larger box that fits large routers + extension cord + cables and so on. SÄTTING cable management box with lid - IKEA clips are made to use…
I was curious to see how concentric rings would work with the curve reversed. As it turns out, not very exciting. They revolve and don't rotate on any other axis.. (duh) I printed it at 1/2 size so as not to use up much of my lousy purple…
i would have to open the nut to install the original wingnut adapter so i reversed it
You will need: 2 - 6x3 magnets 1 - 40mm or 1.57" diameter bottle opener
In an effort to make my entire toolhead a little more compact (for by-object printing), I remixed the mount for this planetary mount to angle towards the left. This does flip the 5015 fan, placing in the input side facing up, but I made…
Print flat on bed with supports. The feet clip into existing slots in heel for a firm fit. RISK of stressing/damaging slot depending on tolerances of print. Tab can be easily cut off if desired, but feet may not hold as securely on…
printed with 2 perimeters 0.2 layer height 0.4 nozzle 25% infill PETg (for flexible strength) I needed to have the RMU-U mounted on the back left and turned around (see picture) Included Models: Top Left RMU mount - Left side, reversed…
Same as the original, but with the header soldered on the other side
Mouse ears are a great setting to use to prevent thin parts and edges from curling, warping, lifting away from the print bed, and ending up with a ruined print. They have also been the bane of my existence ever since I got my Bambu P1S…
I wanted a missile switch cover for my furnace since I was sick and tired of it getting shut off by mistake. The regular covers are so boring, so this spices things up nicely. No one will dare shut off that furnace now, they might blow up…
The original design for this plotter has the belts at front and the steppers at the rear. This is a little annoying for a few reasons: The belts are in the way The belts are more likely to be damaged The control box can be hard to reach…
Created a reverse design of the long bolt to secure a half kilo filament spool. By moving the threaded section behind the tapered end to reach far enough in and centre the spool.
This a Remix of the Reversed Einsey case linked. I have modified pretty much all the parts with the exception of the Hinge Mounts from the original. I improved the air flow through the electronics case and changed the Lettering around on…
Moved the heatset inserts to the other side to be less likely to pull out.
This is a reversed (upside down) PCIE bracket for using the ADT-Link M.2 Riser Extension Adapter. The current version is specifically designed for the Mellanox ConnectX-3 10GB NIC card that I needed to connect through my M.2 slot. But can…
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
This a Remix of the Reversed Einsey case linked. I have modified pretty much all the parts with the exception of the Hinge Mounts from the original. I improved the air flow through the electronics case and changed the Lettering around on…
Same as the original, but with the header soldered on the other side
Aside from reinforcing the clamp, the magazines now point in opposite directions. This is to allow for reload by spinning the pair, and based on how you setup your pair the spare magazine will always be on the left or right side (your…
Just a reversed set of teeth for https://www.printables.com/model/633650-vise-miniature-holder-for-painting
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
Moved the heatset inserts to the other side to be less likely to pull out.
This is a remix of the R4 buffer MMU version by Filmmax. I have it mounted facing forward so I wanted the numbers to go from left to right instead of right to left. This upload only includes the faceplate and the numbers, you'll need to…
Clips for IKEA SÄTTNING cable management box with lid made to use two boxes in order to make one larger box that fits large routers + extension cord + cables and so on. SÄTTING cable management box with lid - IKEA clips are made to use…
![Lightweight Reversed Whoop Canopy [C03]](https://media.printables.com/media/prints/68fee2ff-db72-429a-9666-404605a41b90/images/11110978_7c22043d-4394-4326-b34c-822da0eca994_e0e2e0b5-39ec-49b3-ae44-747a1a2d57a3/img_7887.jpg)
