LED Light Bar Panel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.30 – €2.82 net (excluding VAT)
For file: led_panel_set_02mm_petg_mk3s_2h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.56 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 2.62 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a custom light bar that's more of a panel to house 3 strips worth of LED lights.
- Rating
- 4.667 / 5
- Likes
- 45
- Downloads
- 171
- Makes
- 2
- Views
- 2,435
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a custom light bar that's more of a panel to house 3 strips worth of LED lights. It was designed to work with Sethbon's excellent LED Light Bar for the Prusa i3 MK2/MK3. Fits very nicely. This simply allows you to loop 3 led strips worth for 3x the light. (Link)
SethBon's mounting arm calls for the use of 9x17mm aluminum u-channel. This LED panel is intended to be used instead of that part. (Link)
Total width: 310mm
Mounting end nubs: 9x17x9mm (HxWxD)
I've divided the panel into two pieces to fit the build bed of the MK3S. There are dowel pins to hold the LED in the panel.
Print instructions
Material: PETG
Layer Height: 0.20mm
Infill: 15% Gyroid
Supports: Build plate only
The support is just for the tiny extrusion for joining the two halves.
I suggest PETG to better handle with potentially very hot LEDs.