7/16 Bolt Twist Knob (potentially scalable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A helpful knob for tightening and loosening a 7/16 bolt repeatedly.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a knob for a 7/16 bolt. You simply slide the bolt through the hole and fasten the cap with 3- 3x8mm screws. DO NOT over tighten. the screws create a thread as you insert them. Fit will depend on your specific printer. If the fit is very tight you can tighten a nut onto the bolt to pull the bolt head through into the head pocket. Another option is to upscale a few percent till you get the correct fit.
I designed this for a bolt that tightens a custom steering wheel tilt on a go kart. Lots of practical use cases. Can be scaled up and down, I recommend fastening the cap with glue instead of screws if downscaling. Enjoy