1 / 2
Prusa Enclosure outer camera attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple attachment that is attached to the outside of the housing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Works best with PLA+, PETG. PLA also works, but after a while it no longer holds the camera.
The housing door can still be opened and closed; the camera arm only needs to be pushed upwards.
A standard M3 screw + nut is required to connect the two arms.
The camera ball and the housing attachment are also attached with an M3 screw.
Supports are recommended in the area of the arm connection.