Top View Hygrometer Mount Bambu Labs P1P\P1S\X1C (Magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Placement on the top of the build chamber, to be viewed through the top glass (vs front door of original).
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 115
- Makes
- 1
- Views
- 1,102
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
A remix of Fatlab's remix of Thomas Lord's magnetic Hygrometer mount.
This is for placing on the top side rail of the build chamber, so it can be seen through the top glass. Very handy if the printer is on the floor.
Magnets are 10mm x 2mm rare earth. They will need to be press fit into the mount with a large flat blunt object (screwdriver handle).
Recommended settings for PETG:
Orientation: ‘Front’ hygrometer side on build plate.
Brim inside and out (mount must be flat w/ no warping).
Tree supports @ 60 degrees for the magnet holes. ‘Slight’ warping of the holes is ok, will help with magnet retention.
Tested good for toolhead clearance on a P1S. Can anyone else comment for X1C and P1P?
With the AMS installed, it will block the view of this hygrometer.