BSP D6/D7 Telescopic Phone Controller Portrait Adapter

I made this adapter for my BSP D6 telescopic controller to be able to play on my phone (POCO F5 Pro 6.67") in a portrait orientation.

Features:

• The adapter fits phones at least 73 mm wide up to 125 mm.
• Case/phone thickness compatibility is 11 mm maximum.
• There's a cutout for the side buttons as well.
• Added hooks at the top for increased stability in 2 sizes.
• Included honeycomb pattern to save weight and material.
• It should fit the BSP D7 as well since they are mostly identical with the D6.
• Other controller models and brands like the BSP D3, D8 and Gamesir might be compatible but since I don't have any of those, it needs confirmation. (If someone would provide me the dimensions I might create a version for them.)

Print settings:

• Material: Any
• Layer height: 0.2 mm
• Wall line count: 3
• Infill: 10%
• Support: Yes - Tree support - Touching Buildplate
• Print in the downloaded orientation with Support Overhang Angle: 75
• Print time on a stock Ender 3 V2 is around 7 hours

I hope you like it! Let me know in the comments 😀

If you wish, you can buy me a coffee ☕