Counting matching models…
This is a remix from a model from BR562 on SKFB. I figured there weren't any really good models of the UNSC's primary tactical dropship so I updated this one and added many surface details the original lacked. Always drink from the skulls…
This design is based on spacing points as equally as possible on a sphere (using charge-like relaxation optimization) and then cutting planar slices perpendicular to those directions. This make fairest as possible dice for any number…
I printed it with PLA at 15% infill and .2 layer height on my Ender 5S1. I found the other DeWalt drill holder and it just didnt properly fit my drill and my drill sometimes slid off the wall, this fortunately keeps it secure and even…
This is a remix of my own sieve for the downpipe of the rain gutter: https://www.printables.com/de/model/578245-gutter-sieve-leave-catcher-d78mm-regenrinnensieb It fits a gutter with an inside width of about 120mm (130 or 140mm should…
Replacement Parts for my Synology NAS DS414. Applied Models: DS211+, DS212, DS212+, DS213, DS213+, DS214, DS214play, DS216, DS216+, DS216+II, DS412+, DS413, DS414, DS415play, DS415+, DS416, DS416play and DS916+ Category: Computer
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Esta impreso en pla gris sin soportes en 0.2 con roscas de 4mm, los vastagos son de ½ pulgada, se pueden conseguir en amortiguadores de autos.
A holder for the DeWalt DCD796 drill/driver. To be mounted below a shelf. Holds the drill snug and safe, even with the big 5 AH batteries. Mounts with two screws to avoid turning. The reason for the 10 cm wide to is to make sure the wide…
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
These adapters easily screw into a C7 or D7 valve and let you use a standard tube or air mattress pump, aka “Boston Valve Pump” to pump up your equipment. Hand pump D7 Friction.stl will press fit onto nearly any hand operated pump…
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you…
I wanted to mount a 140mm fan to my BD770i for additional air flow. However, the included bracket only allows for mounting of a 120mm fan. This mount allows a 140mm fan to be mounted offset to the I/O shield and bolts into the existing…
IKEA SKÅDIS mount for PARKSIDE Cordless Screwdriver (PAS 4 D7) At the time of publishing this model, Lidl offered the “PARKSIDE Akku-Schrauber 4 V” ("PARKSIDE Cordless Screwdriver 4V") in Germany for 9.99€. I often stock up on affordable…
Chibi version of D7 class Klingon battle cruiser www.youtube.com/wekster
This is a volume knob replacement for the Kenwood TM D700 transceiver. A layer height setting of 0.1mm, slow printing and supports for the outer ring are recommended. I used a 0.25mm nozzle. Print this object standing upright for best…
Use original version upper and lower locker. Can be printed in multiple colour. S for semi and M for manual. I use SPRKPLG 's handle for mamiya press back. enjoy it! M2*8 7pcs Countersunk M3*8 2pcs anykind screw L3*4 Wave bead screw…
VD7V plus opensource modular camara body provide +-20mm move in both vertical and horizontal directions see pdf manual for details file list: vd7b_plus_publish 1.0.2.zip VD7V_plus_3d_printing_parts.3mf vd7v_plus_manual 1.0.2.pdf (also in…
This is a large seven-sided die that is a double numbered D14 die. Original Onshape design is here . Rough overall dimensions at 100% scale are: 104.2mm x 90.8mm x 78.9mm. Rotate print so that one face is down. Print without supports.
This is the desktop stand made by “midlandjack” published on https://www.thingiverse.com/thing:2884874/files Found this as very useful, great for Kenwood TH-D74 HT tranceiver owners. Works well also for some other radio brands (aka…
Suitable for sprays with a diameter of about 66 - 69 mm. PLA Nozzle - 0.4 Layer - 0.3 Fill 15% Brim
This is the Standard Test Model for ASTM D790. Used for testing the Flexural Properties of Plastic. Its Dimensions are 12.7mm x 127mm x 3.2mm https://store.astm.org/d0790-17.html
Mine was printed in ABS, 0.2 layer, 40% infill. Doesnt really matter. Should work with every Lens and / or without.
Please look at the newer version: https://www.printables.com/de/model/859040-gutter-sieve-leave-catcher-d78mm-version-3 This is a simple Gutter sieve / Leaf catcher for my gutter downpipe. It fits a gutter with an inside width of about…
HO scale Pennsylvania Railroad full dormitory car class PD70R. Sleeps 42 crew members/porters. Two showers, three bathrooms, five sinks. Designed directly from blueprints from…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Für meinen Esprimo D756 als Einbaurahmen für eine 2,5" SSD. Vielleicht passt Es auch für andere Rechner. Viel Spaß beim Drucken! Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: Doesn't Matter Supports: No Resolution: 0,28…
Parts to represent the late production (Tier-1 emissions) SD70MAC Locos that EMD built for CSX and Alaska RR. Also could be used for the Metra SD70MACH. NOTE: For proper fit cutting away at the lower radiator grill on the model is needed.
A top bracket / plate designed to hold accessories like the asiair on my skywatcher evostar ED72 telescope tube rings. The ring spacing is 120mm and designed for the ¼ // M6 through bolts, the nut insert is m6 standard size. The risers…
Cover for 5.25 slot in Fujitsu mini tower Esprimo D756 I printed the cover in PETG. The flexibility helps with installation.
I was a little annyoed with the huge hole around the KBD75v2 USB port. It's super fiddly to insert the cable when you can't see the port (and it maybe helps a little to lessen the strain on the USB-C port), so I designed this super simple…
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
DinRail Mount Bracket for the Mellow 3D Fly D7 Motherboard This mounting bracket is carefully designed to effortlessly attach the Mellow 3D Fly D7 motherboard to a din rail using the existing Voron pcb_din_clip. You can find the link to…
I needed a mount to put my BTT Pad7 onto my ZeroG Mercury One.1 converted Ender 5 Plus. This has four holes, so mounting could be on any flat extrusion, in almost any combination. As long as the plugs have clearance to the rear inputs,…
Simple model, printed flat. May suit other graphics cards.
Use these covers to convert the USA Trains SD70 “floppy” motor block to a solid one. Recommend minimum 10' diameter curves.
Remix of kai's HardDriveHolder D7 Applied Models: DS211+, DS212, DS212+, DS213, DS213+, DS214, DS214play, DS216, DS216+, DS216+II, DS412+, DS413, DS414, DS415play, DS415+, DS416, DS416play and DS916+
i just want to fix pad7 on my printer, so i design this hinge, you can adjust the screen angle also
I made this adapter for my BSP D6 telescopic controller to be able to play on my phone (POCO F5 Pro 6.67") in a portrait orientation. Features: The adapter fits phones at least 73 mm wide up to 125 mm. Case/phone thickness compatibility…
Desktop holder/stand for the Kenwood TH-D75A radio.
SD70ACe flared radiator section for USA Trains SD70. This is a 3d printed kit that includes: Main Shroud, 4-Louver inserts and a fan plate to re-use the fans that came with your model. You must prime/sand/paint yourself. I designed this…
Sealed antennas like those found on the Alaska SD70MAC locomotives.
This is a mount for the BTT Pad 7 that incorporates a base (see https://www.printables.com/model/828776-bigtreetech-pad7-mount OR https://www.printables.com/model/785294-bigtreetech-pad7-mount) that I made - but since I moved around…
Screw it to a wall or use it as a table stand, or create a custom mount for what ever you like to attach you radio to. To use it as a desktop stand you will need: 1x 25mm M3 screw (not counter sunk) 1x M3 nylock nut 2x M3 flat washers I…
A Kadee coupler mounting solution for the USA Trains SD70MAC. I've provided a template to aid in cutting the notch necessary in the pilot. Uses Kadee #907
The original model was for (I believe) a 1" ball. My mounting hardware was all 20mm, so I removed and replaced the ball and shaft (heh) to match 20mm mountings. In particular, I was working with a bulletpoint 20mm socket connector, so I…
Ikea skadis holder for screw driver Parkside PAS 4 D7.
The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. A 92mm cooler is the same width as the radiator. Hardware needed: 6 screws for mounting the brackets to the radiator, they come with the motherboard…
This is a holder slot for mounting under a working table for Dewalt DCD706 12v hammer drill driver. Settings: Filament: PLA, PETG Infill: 25% Wall count: 3 to 4 Support: No
Disc Sander Duo. D50mm, D75mm Mini grinder with two disks, 50 and 75mm. It was created for machining and sanding parts printed on a 3D printer. This is the best tool for sanding ABS plastic, sharpening knives, polishing metal and even…
Winterization hatch found on the SD70MAC Tier 1 HEP locos built for the Alaska Railroad. Requires the flared radiator modification https://www.printables.com/model/653905-late-production-flared-radiators-for-the-usa-train You will also…
This 3D model is a functional mount designed to attach the OrcaTorch D710 to either a Razor Goodman handle or a helmet, suitable for cave diving. It's built to be durable and holds the torch securely, with the option to use zipties for…
This adapter is made to be used with the replacement covers for the SD70 motor blocks. Allows re-use of the Aristo-Craft GE side frames. No need to cut the axles short as they line up with the large holes in the side frames.
Note: the new version is here . I recommend that one as it doesn't require a complex clip spring. This is a battery caddy for the TH-D74A that can hold flat top 18650 LiPo cells. This model is a work in progress, but fully functional. I…
Ablagemöglichkeit für zwei Einkaufswagenchips und einen Hörmann Garagentoröffner (für Zigarettenanzünder). Der Halter klemmt sich, versehen mit ein bisschen Filz an den Kontaktseiten seitlich an den Getränkehalter in die Lücke im vorderen…
With cutout in the bottom for an Arca Swiss plate like the one from Peak design.
While I liked the original model to hold my Bosch PMD7 - which is apparently also labeled Truvo sometimes - I'm really no fan of the T-Nuts used in the original model, because it requires additional hardware. Thus I prefer the Universal…
Replacement volume knob for the D700 with indicators for knob position. Printed in PETG with a color change. Supports along the outer edge only, not the center. Printed with 0.4 mm nozzle at 0.1 mm layer height.
Replacement release clip for Velbon tripods D700 but I'm sure it will fit other Velbon models as well Category: Hobby
Cabinet Bump-out found on Tier 1 emissions version of the SD70MAC locos. Located on the engineer side under the intake grille.
Holder for Box with Cordless Screwdriver Parkside DAS D7. The holder is mounted on top with screws (screw hole: 5mm, screw head space: 10.5mm). The holder's arms are universal, so one model can be used for both the right and left sides.…
Ein Hackenschlüssel D75 wenn man mal schnell einen braucht!
Made this extender because i got tired of my knuckle hitting my glasses all the time while focusing with back button AF. Fits atleast the D7100 and D7200. Might work for other cameras as well, not sure. Picture shows the medium length…
HEP inverter cabinet found on the Alaska RR SD70MAC-HEP - dual-service passenger/freight locomotives.
Intuitive Difficulty Dice Each time you need to roll "one more than before", it becomes more difficult by the same factor (140%), approximately. Great for sensible difficulty increases in RPGs and Wargames that use a lot of Die Modifiers…
I slightly modified it so the ADXL is mounted but you can still use the mounting holes to attach more things.
I didn't have the appropiate spacers - so I designed and printed them. Tehy are sized to be used with standard M4 hex nuts at the bottom. First insert all 22 nuts in the holes, then add the spacers. They are a tight fit and might need…
A protective case for the CED7000 Shot timer with the silicone skin . I have a lot of crap in my range bag, and I wanted something to protect the screen of the timer, as well as eliminating the possibility of it accidentaly turning on in…
This my version of a Puffy Klingon D7 to go up against the Puffy Enterprise. 4/5/18 - Updated the D7 head to be more proportional and fixed the base so the Warp engines can clear the base. Original base staff was too short. While you are…
Replacement part for the Felder AD741 Planer/Jointer. Holes need to be drilled in place. Printed with Polymaker PLA+
Possibility of wall mounting with screws. The protruding hooks can be used in any way, e.g. to hang the charging cable.
The original handle to this mic is a rubbery material and disintergrated on my ~20 year old example. I designed this version to be a very secure push fit. You might need to scale slightly (100.5% or 101%) or run a round file through it to…
Klingon D7 Battlecruiser for Minimates. DST made several versions of the Enterprise but no other ships. They made a Kor Minimate. He needs a ship to command and the Enterprise needs a counterpart to battle. The parts starting with "left"…
My attempt to make a mount for a BTTPad7 (BigTreeTech) for Klipper, mounted vertically on my Elegoo Neptune3 3 Pro (would probably work on 3 Plus and 3 Max - but haven't tested). Uses the existing mount point from the standard Neptune 3…
This is a simple and easy to print holder for the Parkside electric screwdriver PAS 4 D7
This tripod foot uses a Gopro mount inspired adapter between the base and tripod foot. This specific design is to fit Meade LXD55 tripod feet however it can be easily adapted to fit other tripods. I printed it in PLA and it uses a M6x25…
Nice storage solution for decent parkside screwdrivers. Rails mounted, 2 required for good stablility.
I find the screw-in cap supplied with the ED72 to be very fiddly. Needs absolutely precise orientation. So I designed a slip-on cap. Ideally print this with TPU filament, as it is intended to be a snug fit, and the TPU moulds nicely. If…
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
Pioneer remote cover AXD7622. Was missing a cover for my Pioneer amp remote, so i designed it.
My SONOS Beam blocked the view of the TV… The feet are not high enough. A small raise of about ~17mm (15mm for the print and a 2mm for felt anti-scratch feet) When not r/TVTooHigh this should be plenty. Felt anti-scratch feet are…
I really like the Round Eyecup on the Nikon Z9, its way more comfortable than the default rectangular Eyecup. Both parts are really easy to print. Once printed, the TPU Eyepiece snaps onto the base. I reccomend a layer height of 0.15 or…
I created this guide to snugly fit my DeWalt DCD794 cordless drill. I used three 9" long, 3/8" aluminum tubing for the posts, and a 5/16"-18x6" long machine screw as the depth gauge. I drilled out the base holes at 3/8", and the cradle…
Blank wall cover plate Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design Dimensions: - "Small" diameter: 70mm - "Big" diameter: 110mm - Depth: 12 mm More from…
Gut möglich, daß die Produktdesigner bei Fujitsu® etwas Anderes im Sinn hatten, aber das Ding hält die Platte fest und verriegelt… was will man mehr. :) Viel Spaß beim Drucken! Print Settings Printer Brand: Anycubic Printer: Vyper Rafts:…
Bracket for mounting pad7's ADXL accelerometer SPI-Device to Creality Ender 5 S1. needs m3 screws for mounting. i used my inserts in this pictures as i ran out of heat inserts and/or m3 screws. works neatly, can be found here:…
I needed a mount to hold my speaker (Kenwood SP-41) and remote display for the Kenwood TM-D700, so I designed this and printed in PETG. I have photos of the install and perspective. Used black PETG and the following settings on the MK4…
A BTT Pad7 accelerometer mount for a Delta E3D V6 effector. I am using a simple effector on my Delta printer with 40mm spacing between the delta-arms. I switched to Klipper and am using the BigTree Tech Pad7 , which comes with their own…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1YQfF7590i2
The original file is fantastic. If you live in the UK, you can pick up the 8mm aluminium rods from Wickes. I printed the original file but the DCD795 wouldn't quite fit the drill guide. So I tinkered with it to make it fit. The whole…
Improved and flat bandsaw table insert , fits Hammer N2-38, Hammer N2-35 and more with respecting dimensions. The insert delivered with the bandsaw was neither flat or had some reasonable small clearance. Outer diameter: 70mm with some…
Black and Decker battery drill screwdriver bits holder. Clips on the drill hold 5 screwdriver bits Model: BCD700S 0-1400 RPM 0-360 no 10mm 18 Volts 1.5Ah 4x M3 x 3mm Countersunk Allen head bolts. 2x 20mm x 10mm With Two 4mm Countersunk…
This is a mounting solution for the Mellow Fly D7 controller board. It can be attached to your printer either by using standard Voron Design DIN rail adapters and M2 self tapping screws, or by screwing/gluing directly to your electronics…
Since Neato servers are off, you can use your robot vacum only by using a physical buton and it's functionality is limited. Then this Neato Brainslug mod comes to the rescue (big thanks for the creator, you did great work!):…
TH-D74 is a really cool radio, but it's a bit of a battery hog. If you're going out for more than a few hours you might want a spare battery with you. This is a cover to protect the internal terminals. It also have an indicator switch you…
Die untere Absaugung war bisher bei meinem selbstgebauten Fräslift nicht möglich. Nachdem ich jetzt den ENJOYWOOD GD7 PRO Fräslift in unsere kleine Frässtation eingebaut habe, war mit dem bereits vor einiger Zeit gedruckten Teil die…
I had been looking for a while to see if someone had uploaded some type of mount for the Kenwood D700A ham radio. I could never find one, so I decided to draw one up. This is a work in progress, although it worked for me right off the…
