3mm LED Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snaps in a 5.5mm bore and secures your LED in place with its latches. No friction fit needed
- Rating
- 5 / 5
- Likes
- 292
- Downloads
- 1,621
- Makes
- 2
- Views
- 4,309
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 5.5mm hole with at least 1.0mm material thickness
Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. However, 0.12mm works best. No support needed. PLA wokred just fine with me but since the holder features little latches and has to be snaped in place, PETG might be more suitable for this job. Due to its smal size, it might also have some stringing but this does not impact its function since the latches do mostly still move. Should also work with resin
If you have to modify the led mount to make it fit, you'll find the .step for download too
If You are looking for a 5mm LED mount, you'll find it here
CHANGELOG 28.04.2025
Added an improved version with tighter grip on the led. This is also usefull if you are slightly under extruding, since it is a little thicker around the latches. The original model is still available in the original parts folder