1 / 3
xTouch Case for P1P/P1S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the xTouch display (2.8-inch ESP32-2432S028R board). Usable on P1P/ P1S.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 0
- Views
- 776
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Easy to print case for the xTouch Display for bambulab P1P/P1S
Print with Tree-support as shown in the sliced picture.
Display can be mounted with screws in the inner case, but they are not needed.
Just slide the display inside the housing and attach a micro USB cable to it, for power.
If you want to you can also use the inner USB port to power the display. Therefor i made a slit in the case mount, where you can put your cable through.
Manual for xTouch installation available here: https://github.com/xperiments-in/xtouch