1 / 3
GRID Brows magnetic case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the GRID Brows with magnets
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 65
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple case for the GRID Brows with places for magnets to easy mount them on the rig.
Brows: https://grid-engineering.com/de-de/products/grid-brows
You will need 4 magnets with 12mm diameter and 3mm heigt.
The tolerances are very tight, make sure that your printer is well calibrated or scale it up a bit.
I also included the .step and .f3d if you want to make some changes.
Have fun. If you use it or remix it, please post it. That will help us all :)