1 / 1
Kenmore 158.12310 Sewing Machine Recessed Foot/Cushion replacement — image 1

Kenmore 158.12310 Sewing Machine Recessed Foot/Cushion replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I got a Kenmore 158.12310 sewing machine second-hand that was missing the front right foot, so I modelled a replacement.

Rating
0 / 5
Likes
2
Downloads
19
Makes
0
Views
208
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

A replacement foot for my old Kenmore model 158.12310 sewing machine.

The internal structure that this foot mounts to is partially continuous with the cast metal frame of the machine casing, so it requires a cutout in the coupling collar to accommodate this and I couldn't find any aftermarket parts online I was confident would fit.

The central bore hole is primarily there to put solid walls in the center of the print to support the weight of the printer. The machine does have threads on the peg that this fits, but I don't have a screw that fits those threads so I didn't put a countersink in the bottom as an unfilled countersink would make for a weaker foot and a more challenging print with less bed contact. 

The collar is a snug friction fit and that is enough to keep it in place for me, so if your machine is not well calibrated, you may need to scale it up a tiny bit for it to fit (particularly if not using TPU).

I printed this part in PLA+ @ 205C nozzle temp, 60C bed temp, no brim, no supports, 0.2mm layer height, 0.4mm nozzle, 2 walls, 25% infill. 

Ideally this would be printed in TPU, but I haven't set my machine up to print TPU. My PLA print is preforming adequately for me - the other rubber feet have effectively prevented the machine from sliding, but a grippier TPU would probably be closer to an ideal material.

If sliding becomes an issue for me, I plan to buy a set of rubber feet to add to this print and remaining intact feet so that everything is raised the same amount.

The solid component of the foot is 17.8mm and the coupling collar extends 12mm beyond that. The inner diameter of the coupling collar is 12.3mm. The central bore hole diameter is 3.5mm.

Tags