Bitaxe Ultra 1366 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable case for the Bitaxe Ultra 1366 Solo/Lottery Miner
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 125
- Makes
- 0
- Views
- 1,976
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This case is for the Bitaxe Ultra 1366 Bitcoin solo/lottery miner. There are two different versions of the bottom part - one with and the other without mounting holes. All parts can be printed without support.
The design requires the use of threaded/heat set inserts and an extension cable for the display.
BOM:
- 4x M3 threaded inserts (M3x5.7)
- 4x M3x10 round head screw
- 1x 4-pin extension cable (length max. 10cm, so you can easily work during assembly)
The display is slided in from one side and is held by that bridge. It's a snug fit but after you managed to get it in, that boy ain't going nowhere ;)
As the temperatures of the Bitaxe Ultra 1366 normally don't exceed 55°C, I printed the lid with PLA+ and the bottom with ABS+. In hindsight, that wasn't that clever as the materials have different shrinkage factors. So I recommend simply using the same material and one that can handle the temperatures.