Skadis 3 / 4 Hotends Bambu Lab Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for 3 or 4 assembled Bambu Lab hotends (X1…/P1…) for Ikea Skadis.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 57
- Makes
- 1
- Views
- 258
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
I was asked if I could create a hotend holder similar to my existing version for the A1 (mini). So here it is.
No support needed. Just print as oriented in the stl files and take care that the pegs are massive. I used a modifier cube with 100% concentric infill (see 3mf file).
The holder is quite flat, so I recommend using the Skadis Lock Plug (10mm) to prevent the holder from sliding out of the pegboard holes.