1 / 3
Bambu Lab P1 / X1 Slim glass riser (fixed failed to retract error)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4mm slim riser for a minimal look that fixed my railed to retract error in spool 3 of my ams
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This minimal glass riser, rise the glass lid with 4mm, which will help the bowden tube angle to be less narrow.
Creates a minimal look with a functional part.
In my case, this rise of 4mm fixed my “Failed to retract” problems with the ams of spool 3.
At the bottom of the riser there are 4 holes in each part for magnets to hold the riser in place when lifting the glass lid.
(for the front 2 parts, there are holes, but there is no metal in the printer, so only place magnets at the side and back of the printer)