Domus Line Skate 3.0 UL Sensor Cap Translucent
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Translucent part for the Kitchen light, where the original part over time got too dark, so that it did not work anymore.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 26
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
The lamp is controlled via touchless light sensors which are fitted behind this part.
I don't know exactly if the sensors detects more or less light, when you put your hand in front of it, because there is also a LED directly beneath the sensors. But what I know is, that the lamp can not be controlled anymore because the original part is not letting enough light through after some years.
So I made this replacement part, which is my first time 3D modelling and I used the (according to all the Youtubers) easiest tool for the job https://cad.onshape.com/documents/f26db4e506d2b641e24c51ee/w/81d9a82647d2aa0a8e74d713/e/f7e74894522f17305ef61d7b?renderMode=0&uiState=65a8202cc16ffd46e9711354
Printed with the tips from https://blog.prusa3d.com/3d-printed-lens-and-other-transparent-objects_31231/ and https://www.printables.com/model/273948-test-model-for-transparent-petg-printing
I used Amazon Basics transparent PETG. Most importantly, the infill direction has to be 90° and I printed it laying on the side with the best results. But tried multiple times to find the best configuration.