Extruder Motor Cooler MK3s/+ by Simonpk
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.32 – €5.28 net (excluding VAT)
For file: Cooler v3.2 MK3S_0.2mm_PETG_MK3S_5h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.80 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 5.44 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Futuristic extruder motor cooler with led and Noctua cooling fan! Inspired by SpaceX's dragon capsule.
- Rating
- 4.636 / 5
- Likes
- 144
- Downloads
- 450
- Makes
- 6
- Views
- 5,061
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Hello, I'm industriel designer, I usually draw on Rhino3.
I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The cooler has a support for a led directed towards the nozzle.
it was designed to allow the passage of the idler and is simply tightened by the M3 of the FS-cover.
I was inspired by SpaceX's dragon capsule.
Don't forget to like and comment! Thank you
Listing :
2x M3 DIN 912 (optional)
2x Cable Tie Nylon (deliver with mk3S)
Noctua A4x20 :
- 12v Here
- 5v (to connect it directly to the electronic board) Here
Noctua A4x10 :
- 5v Here
Led 12v Here
12v transfomer Here
Print instructions :
I printed this in PETG Prusament with support. 0.2mm layer height and 10% infill.
The link of the installation video on Youtube Here
CULTS :
https://cults3d.com/fr/utilisateurs/Studiopk
FACEBOOK :
https://www.facebook.com/simonpkstudio