Ender 3v2 spoolholder with 608 bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bearing spoolholder. Should work on any Ender 3v2/Ender 3v2 clone.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Ender 3v2 rolling spoolholder for less jerk on extruder/filament roll.
To print you will need one of each part except the "Roller half" which you will need two off.
The two rollers should then be sandwiched in the two 608 bearings making it essentially one roller.
To attach the screw to the holder you’ll need two wood screws (25mm) or possibly just superglue although I’ve not tried that personally.
I used SUNLU PETG but i think PLA or any other material would work just fine.
Update - 2024-01-30
Shortened the roller for less leverage on the printer.