Basement window vent for laser engraver 4 inch 100mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need to vent in basement, wanted a damper to open and close
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 132
- Makes
- 0
- Views
- 1,376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I needed to vent a new laser engraver and wanted to set something up that could slide into my basement window and have a vent for casual use to open or close if the weather was being nasty. I added ¼" weather stripping around all edges.
The remaining parts for the valve etc I didn't modify although if I was printing another I might beef them up a bit as the shaft feels a little wimpy.
I used the cut tool in Prusaslicer to make it fit with dowels with glue and a strip of duct tape to stop any leaks.
I also made a coupler from the vent body, I wanted that ridge on it so the zip ties would be on there and they couldn't come apart.