LED Light Strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A system to manage an LED light strip in your 3D printed enclosure.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 104
- Makes
- 0
- Views
- 853
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
These LED light strip holders are designed to fit inside this enclosure designed by @TylerSpurgeon. They attach magnetically to the frame using mounting pieces that are fixed in place using the screws that you use to assemble the frame. The diffuser slides into the holder once the LED strip has been inserted.
The parts are designed for 8mm light strips; 10mm strips might also work but I don't have any of those to check. There are two sizes: a regular 6 inch length for the center sections, and a longer piece intended for the corners (to minimize how much of the strip is exposed). You will need 10x2mm magnets for installation – four for each section (including the mounts).