xLCD enclosure top mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for an xLCD display on the top edge of the enclosure.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 37
- Makes
- 2
- Views
- 732
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
I modified the holder of the xLCD display so that I could screw it onto the upper edge of the Enclosure. Now I have the printer on the floor, which is more convenient for me, and the display doesn't stick out as much. I used the original xLCD cable for the XL printer and 3x textile sleeve. I also made a D-SUB connector for disconnecting the display from the printer. I'm using it with a quick connect cable from the power supply, so I can easily remove the printer for maintenance. The D-SUB connector is not included because it would be difficult for you to find an identical connector. If there is demand for it, I can create a connector model in the future. The only problem is the grounding cable, which you will have to crimp to reach from the xBuddy board to the display.
Update: 27.12.2025 - Added lcd feet for MK3S (Thanks AbsoluteZeroDesign for testing)
Notice: The cable for the XL printer is approximately 155cm long. I routed it from the xLCD connector through the upper corners of the enclosure and then down the back. It came out precisely into my connector. If you are connecting the cable directly to the xBuddy board, the cable will be 10-15cm shorter, and you will need to route it across the ceiling of the enclosure. Those with skills may use connectors (24pin Micro-MaTch (TE 2-215083-4)) and crimp them to the required length. At longer distances, there is a risk of interference and artifacts may appear on the display, so testing is necessary.
You will need:
Prusa XL xLCD cable:
https://www.prusa3d.com/cs/produkt/lcd-kabel-xl/
3x Prusa textile sleeve (If you want it to look nice :) ):
https://www.prusa3d.com/cs/produkt/textile-sleeve-49-cm/