K1/ K1C/ K1 Max Filament Feeder Assistant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"One shot, one kill" when feeding your filament into the PTFE bowden tube with this feeder assistant.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 391
- Makes
- 1
- Views
- 1,961
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I own a Creality K1C and feeding the filament into the PTFE bowden tube is a hit or miss depending on how awake or how much in a rush I am. Decided to take luck out of the equation by making this adaptor to “funnel” the filament into the PTFE bowden tube at the back.
It is a simple contraption that uses friction to hold on to the PTFE tube at the filament sensor end. On the other end is a 7.5mm (diameter) funnel to guide the filament into the 2.0mm opening of the PTFE bowden tube. That's 3.75 times wider and you should be less likely to fail.
I would recommend printing it in fine quality (0.12mm) due to the slight slope/ angle used for the friction hold.
Changelog
- V2 - Changed to screw lock design for better grip on the bowden tube.
- V1 - Initial release
How I printed it
- Material: PLA
- Layer height: 0.12mm
- Pattern (top and bottom): Concentric
- Walls: 3
- Support: None
- Raft/ Auto-brim: None