Modern minimal DIY lamp with 70mm downlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lamp that can be easily made by using a downlight as an alternative as the light source
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 24
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a easy to print full lamp, only things you will need is a 70mm downlight and glue. If printing the base and legs separate for dual color finish then the downlight springs will keep both parts together, if you want a permanent fixing then m4 or m5 screws will fit in nicely.
For fixing the top/ Light defuser on then a couple drops of glue around where the 45 degree champers will fix it together.
Print the base and legs in one go for single tone and print at 15% infill with atleast 4 thickness wall count for a strong model, increase wall thickness for the best results.
Light- Any LED 70mm downlight should work and most come these days with wall outlet plugs on them, they are extremely useful for adjusting color temp