Blink Mini Camera Mount for Prusa XL EnXLosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a easy Camera Mount for the Blink Mini and the Prusa XL EnXLosure from VOXEL3D.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 60
- Makes
- 2
- Views
- 718
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello 3D-Friends :)
i was looking for a camera solution for my Prusa XL.

I actually wanted to use Octoprint for this, but unfortunately I discovered that there is no progress indicator on the Prusa XL's display.
A big no-go for me at the moment!
So I wanted to install PrusaLink on an RPi and use a webcam for it. Unfortunately, this only works with old printers that don't have a buddy board... (read more)
Now I have decided to stick with the on-board PrusaLink/PrusaConnect for now. I saw that it was currently possible to use an ESP32 cam for the video stream, but since I still have a BLINK Mini left, I decided to use it.

This mount works with the Mini and also with the Mini 2.
Material List:
- 1x M3x8
- 1x M3 Heat Set Insert (Leftover of the EnXLosure Set)
- Blink Mini 1 or 2
- USB Powersuply 5V 1A
Print Settings:
- 3 perimeters
- 15% Infill
- PETG, ABS, ASA, PC, PCCF… (NO PLA!)
- 0.15 or 0.2 layer high
- no supports needed
- maybe brim needed
Instruction:
You can choose between the left and right sides. Melt the thread on the frame as shown in the picture. Now attach the holder with the M3x8mm screw to the enclousure. With the Blink camera, the holder must first be removed. Simply pull it out and clip it off. Now you can clip the printed holder onto the back of the camera. That's it!





LEAVE A LIKE AND POST YOUR MAKE <3
