1 / 6
Coin Cell Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coin cell box that holds CR2032, LR44 and LR1130 batteries. For the lid 6x2mm magnets are used.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 74
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved the idea of the coin cell box by @mac310, but I also have a few LR1130 that I wanted to put in there. Fortunately they have the same diameter as LR44 so I only needed to change the depth of the slots.
I also did a few more modifications to make the box more comfortable to use:
- Added a guide to make it easier to place the lid on the box.
- Included a cutout to indicate the correct lid orientation.
- Added a groove for easier box opening.
Print settings:
For my prints I used the following print settings:
- 0.2 mm layer hight
- 3 walls
- 15% infill (rectilinear)
- Arachne wall generator
Assembly
You need to glue in 4 6x2mm magnets. Make sure to get the polarity of the magnets right.