Frame_BetaFpvMeteor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
tiny whoop frame
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 79
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Need to scale in slicer up to 1000 Frame for meteor 65 printing SBS, nozzle 0.2, it took me 8 hours with a Layer height of 0.1 ,layer width 0.22, print speed 20 mm/s. The protection is specially wider so that the screws do not bend upon impact. I used cura slicer, printed on Elego Neptune 3 Pro, downloaded the Maya 2022 file so that I could make changes as desired.
V_02 Strengthened the mounting location of the bumpers, reduced the weight, but the propellers are now up to 35 mm.
V_03 It turned out to be heavier. The softer, printed TPU72d also secures the flight controller to the frame, TPU72d has ductility to avoid cracking in layers.
V_04 I lowered the battery mount to be lower, this makes it easier for the flip over after crash option. The weight of the frame decreased (5.122), this time I used PA (nylon) or continue TPU 72d
V_05 fits square shaped flight controller.
V_06 for 30mm propellers and larger battery (frame60_nylon_v_06)