Prusa XL Multi-Tool Manual calibration [Lower Temp Remix]
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.04 – €0.05 net (excluding VAT)
For file: Manual_Calibration_2T_04_PETG_230c.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Gcode is used to verify and fine-tune automatic tool calibration. This is a remix for lower printing temperature.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 221
- Makes
- 0
- Views
- 1,495
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
- On PLA the printing temperature is reduced from 215 to 200 degree celsius.
- PETG printing temperature is reduced from 245c to 230c.
You find the article for calibration here: https://help.prusa3d.com/article/multi-tool-manual-calibration-xl_470560