NOVE - The Step
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 90mm - 96mm step is used to reach high objects, exercise, or as a stool for gardening. Tested for 145kg.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Nozzle 0.8mm
Layer height 0.4mm
Filament: PLA, Bambu Marine Blue, Matte
Perimeters: 3
Infill: gyroid, 10%
Filament needed for the “Flat Step” version: 755gr
Filament needed for the “Light Step” version: 718gr
Filament needed for the TPU parts combined (cover1 + left pad + right pad): 163gr
Weight supported: 145kg (two people actually stepped on it together to test it).
Measures: 230x210mm
Height of the step: 90mm
Height of the step with TPU parts added: 96mm
---------------------------------------------------------
Nove means 9 in Italian. This 9cm step is useful for allowing people to reach high objects or to facilitate getting off a vehicle, or even to use as a small stool for gardening. Keep in mind that it is not certified for use by disabled people or children, so use it with common sense. There are two versions of this step:
“NOVE Light Step” with holes, which is a bit lighter. And “NOVE Flat Step” with a flat, solid surface, which is just a bit heavier. Additionally, I have designed some accessories that I recommend printing in TPU: a non-slip cover in two versions, and non-slip feet.
It is not necessary to print the accessory parts in TPU.
The step, printed with the parameters indicated above, can support a weight of 145kg without breaking or deforming. It may support much more weight but it's untested. The light version prints in 7h 49mins (Bambu A1).