Prusa ESP32 magnetic camera mount for S-12-06-DN
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix for usage with S-12-06-DN magnets.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I use S-12-06-DN magnets.
The stl is oversized because of the conversion. Just scale it down to 10%.
Print with supports in 0.2mm layer height and 15% infill and 4 perimeters for perfect sturdiness. Filament on pictures is Prusament Galaxy Black.
In the pictures you see my model in comparison with the original from Braw.
The complete stand as seen on the covier picture is mixing in three parts from : https://www.printables.com/model/801363-esp32-camera-case/files
ESP32_Cam_Case_Top_Part.stl
ESP32_Cam_Case_Bottom_Part.stl
GoPro_Like_Joint_Case_Clip.stl
and just as Braw does the part ‘Gopro_Like_Joint_Straight_Middle.stl’ from https://www.printables.com/model/801345-articulated-arm/files