MGN9H rail convertion kit for BaGoon's insert press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a adaption kit for the MGN9H rails since it did not fit the original design and I had already printed out t
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 70
- Makes
- 1
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
You can use these parts this with this model https://www.printables.com/model/808502-heat-insert-press
I had already printed out all the parts before realizing that the 150mm rail I had was not the one I needed for this press. Still, I was already set on finishing it now and could not be bothered to redesign the arm/holder, so I made a conversion kit instead.
I used 4 pcs of M2 heat inserts, the longer the better I suppose, I used the longest one I had.
I have a cheap printer so this might not be an issue for you, but it was a bit tight for me, just like the original parts and I put the rail on and used an extra long M3 screw to press the M3 nuts into the nutbar before I mounted it in place, the good news about that is they will not fall out I guess.
I hope someone else also needs this.
if you need M2 heat inserts you can get some on Aliexpress with my affiliate link here: