Counting matching models…
I had issues printing the frame of Mini 13 with no supports, so I remixed it with some simple supports built in. Inspired by this for Lucky 13 by basti30 : https://www.printables.com/model/154760-lucky13-easy-print-without-brim Printed…
Combined both the top and bottom and added a cut on the other side of the lever, so this can be printed in one part. Added an expanded area for the thumb to be able to slide out the USB side more easily. Print with no supports in the…
Hard Case for Moondrop Space Travel. This is press fit case. Has notches for your fingers to easily remove the case. This is printed in PLA, but can be printed in any material any layer height. Notch also shows charging light. Print in…
Shoe lace anchors for your shoes to convert them to no tie shoes. There is a commercial version that I used in the past, but since have been lost because I tossed the shoes that had them. Since it was such a simple, yet effective design,…
Dragonfly BMO hotend without collar adapter. The original model didn't have a separate version that didn't have the collar and I couldn't find a model for it, so I modified the step file from Phaetus' website . Included step file and stl.
Note: I haven't actually installed this and ran any prints on the Prusa Mini+, so use at your own risk. I didn't test out the flush plate, but included it anyway. Spacer plate to fit the Bondtech LGX Lite extruder on the Prusa Mini+. You…
Mechanical Keyboard Plate Fork to help align and insert switches into your keyboard that has a standard spacing (19.05mm from switch to switch, horizontally). Just put this in between the plate and PCB before inserting your switches. Made…
Remixed the tabs so it has a pin to hold the spring for easier assembly. Use supports under tabs. Use along with original body and lid here . Insert spring into pins, compress spring with tabs and place into lens cap body. Use a bit of…
I haven't tested load, but it seems to hold more securely where I can't just pull it apart without pressing on the sides. Print with the default orientation and hotter will give you more layer adhesion strength.
This is web camera mount on the Z axis motor that's on the right side (when facing the front of the printer). It should hold any standard camera that has a ¼" screw hole mount. My remix adds a hole for a m3 nut on the opposite size of…
After more than 13 years of near daily use, the old plastic that holds has started to show it's age and cracked, the audio is still good and I love these headphones, so I model this up rather than designating this to the trashbin. This…
Baroque Portfolio Poster Tube Cap for their portable poster carrying tube (they don't seem to sell this anymore on their website). There seems to be some tolerance adjustments needed as it seems the width closer to the top of the cap (the…
Filament Dust Filter with Spring Clip with ridges for grip and updated to not using piece of filament for hinge and using a snap-fit hinge instead. Be aware of tolerances. There's a looser one that I've also included (DustFilterClip -…
Addons and modifications for Microlab for my setup Tray for Raspberry Pi 4 - 0.5U with inlet for USB cable to power Cudy network switch Tray for Kamrui AK1Plus Tray for Cudy 5-port network switch Top Cap modification for handles + handles…
This is a remix of a case for a macro keyboard pcb by RyanBates PCB is here: https://www.tindie.com/products/ryanbatesrbg/pcb-for-programmable-macro-keyboard-encoders-v2/ Documentation:…
Get your own Twitter Blue checkmark at no cost! Twitter Blue Verified Checkmark Keychain. I included a 3mf that has a manual color chain exported from prusa slicer, use your favorite white pla filament and then switch to a blue one. If…
Small footprint, bufferless setup for MMU3 on Core One with Rewinder Spools. BEWARE: The instructions and parts below are a work in progress, some of the BOM numbers might be inaccurate in quantity. I have yet to extensively test this…
Glasses hinge insert for Dolce and Gabbana glasses. You need to print two, one for each arm or one if you lost just one. This fits with friction, but I suggest to super glue this. print settings: Nozzle: 0.4 mm Layer height: 0.1mm…
This is a remix of a case for a mini macro keyboard pcb by RyanBates PCB is here: https://www.tindie.com/products/ryanbatesrbg/pcb-mini-programmable-macro-keyboard-encoders/ Documentation:…
Update 4/3/2026 - Created a totally new version that extends the entire length equal to the original extender, all in one part. Also, thickened the body. Modified the 66mm version to lengthen the threads to make it compatible with…
Inner Diameter Adapter for Cardboard Spools, included for Fugacity (55.6mm inner diameter), Yousu (53.4mm ID) and Polymaker (55.1mm ID) spools, but you can customize the model for your spool by editing the fusion 360 models and adjusting…
Studio Neat Cosmonaut Case and Cap that replicates cardboard one it came with giving it a similar "pop" as you lift off the cap for the Cosmonaut Stylus. There are two versions of the body aka case, there's one with grips and one without.…
I modified the vent to allow for PTFE from MMU to Extruder to pass through top panel, so it would not require cutting the top panel. Top panel needs to be rotated 90 degrees counterclockwise and short side with cut outs facing the back of…
I love my Audio-Technica ATH-A700 , but it's on its last legs, the plastic was basically disintegrating, but the drivers and closed back housing are still in good condition. I remixed the cup holders from the “Audio Technia Capra Headband…
iFixit Magnetic Essential Extensions Tray with dividers and magnets, using 6x3mm magnets. Insert magnets in the same polarity as the original bottom tray, in the bottom and top corners, you might need a dab of super glue. I didn't use any…
These are all currently available results.
