Counting matching models…
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
I like flying the Blade mCPx V2 indoors or in a calm day in my back yard when I do not want to drive to an RC field to fly the larger RC helis! It is very, very tough and can take crashes without any damage except the landing gear/battery…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
We have a few Tommy Bahama Beach chairs and after many years the plastic part that connects the chair frame and allow for the chair to fold broke at the main junction. The challenge was to create an ASA 3D printable part that can take the…
Print approx. €6.36–€7.78 excl. taxPreliminary estimate for one variant
Print all 16 PrucaSlicer Infills available each one in a little box with raised letters of the infill name. It can be printed 100% on a bed with minimum dimensions of 210 mm x 203 mm (X,Y). I printed it on a PRUSA MK3S+. Slicer:…
I use USB web cams on both of my Voron2.4r2 printers for 2 years now. I use a 8mp USB Camera Module with 3.6mm Lens and made the cases for it. This mount has the following advantages over other full sizes cameras for monitoring prinitng.…
I liked the design of "Gardening leaf rake with replaceable teeth " by https://www.printables.com/social/5644-darazsweb but I do not have a Gardena pole. This adapter will connect to a standard broom/paint screw pole which uses ¾" 5 TPI…
Please refer to AP.Engineering page Shrinkage Calculator for how to use it and the very important spreadsheet. The reason for the re-mix is for some minor issues I had with setting up an imperfect CoreXY (Voron2.4r2) that left behind an…
FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
I show the original idea at Medlin Drone site and using Fusion 360 created my own version. This version is designed around the Walksnail Moonlight 4K camera and the AOS frames, UL7 EVO and Cine35 EVO . To check if it will fit other frames…
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…
I loved the Designer Lithophane Moon Lamp by @FrankDeschner which is an updated work from 8" Inches Progressive Detail Moon Lamp with IKEA screw socket but I wanted something little bigger. 140% bigger! Using my Voron 2.4r2 350x350x350…
There are a lot of different overhang print test object available already. I created this for the following features: Larger base for good bed adhesion. 50 mm outside diameter 12 mm wide “legs” 5 mm blocks of each degree change, larger…
I upgraded my Voron 2.4r2 FDM printers to Stealthburner from the original Afterburner and after testing I replaced the original Bondtech LGX extruder to the smaller and lighter LGX Lite v2 which utilizes the large filament gears as the…
This is a variation of a 1kg single filament spool box that includes a silica gel compartment and hydrometer. Main design consideration where: Airtight cereal box. Holds in a built-in container about 100 cc of Silica gel beads. 2x…
The original design using ABS/PLA filament for the hinges and works great until the filament eventually breaks. This version uses Stainless Steel spring wires for hinges, and the arms are thickened for longevity. I have also included the…
This is the same muffler designed by VzBoT but modified to incorporate TPU gaskets to further reduce noise. I used eSUN TPE 85A . Also, eSUN TPU 95A can be used, which is a little harder but easier to print. Included the modified STEP CAD…
Self standing hart with a hidden sign “Happy Valentines”. The sign folds inside the semi-hollow hart and the pieces are hold closed with multiple (12) 2 mm x 5 mm magnets. YouTube Video of Broken-Hart The only support required is for the…
This two piece TPU print holds a Matek M10Q-5883 GNSS (GPS)/Magnetometer (Compass) and a SMA antenna bulkhead for a single VTx antenna for a AOS UL7 FPV drone. Both pieces are printed without supports using eSUN 1.75mm TPU 95A Flexible 3D…
The Daylight Disco on a Stick LEDs (RGBW) by Blamm are great PCB/RGBW LEDs design for lighting a 3D printer's encloser or any cabinet as long as you can provide 5Vs and neopixel signal. I installed them on my Voron 2.4 enclosers. They…
There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.
I wanted to create a name-tag with some mechanical motion but still functional as a name-tag! I have incorporated a very simple system of 3 gears that display one of the following three options when you rotate the knob connected to one of…
It emulates a weaved utility box for the home office. Compartments are created to fit cards, glass cases, envelopes, small tools, pins, Bic lighter etc. Also, three hooks are integrated to hold various keys. The full dimensions of the box…
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
This is a modified casing of the great Mellow LLL Plus Filament Buffer so it mounts on the side of a 2020 extrusion. Nothing else has been changed so all other printed parts and LLL Plus kit will fit as it is modified from the OEM CAD…
The approximate printed size is 65 x 65 x 200 mm tall. No supports are required, and I will recommend slowing down the overall printer speed for greater finish. The pictured ornaments are printed on a Voron 2.4 using a custom toolhead. I…
I upgraded my Voron 2.4r2 FDM printers to Stealthburner from the original Afterburner and after testing I replaced the original Bondtech LGX extruder to the smaller and lighter LGX Lite v2 which utilizes the large filament gears as the…
A 20 cm tall base to place an Alienware Aurora Desktop Computer. Due to the overall length of the computer, the base needed to be constructed in three (3) pieces that interconnect seamlessly. NOTES Due to the size of each block, I…
Skirt and TFT50 screen frame with an optional SD card remote reader for updating Firmware. These parts are designed to fit and blend with the original Voron 2.4 skirts. Parts Used: BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display Micro…
The approximate printed size is 65 x 65 x 200 mm tall. No supports are required, and I will recommend slowing down the overall printer speed for greater finish. The pictured ornaments are printed on a Voron 2.4 using a custom toolhead. I…
It's an Open Sauce 2025 Tag that shows the words: Idea, Design, Make by a manual turning a knob that is connected to a gear. Video can be seen at YouTube Utilizes magnets to remain on any thin fabric without damaging it. The uploaded…
Dyson v8 cordless vacuum includes a few accessories for different cleaning jobs but without an easy way to organize them close to the charging station. This “base” is placed between the wall and the charging station. It utilizes the…
These are all currently available results.
