19 models
Topdon TC001 and TC002 thermal camera lens mount Rasperry pi, left: with macro lens 76.2mm, right: without (both images scaled and cropped to show the approx. the same excerpt. The closest distance where the image was as sharp as possible…
This is a helicopter that rotates when falling towards the earth and consequently falls slower than a stone. A slingshot is included to bring the device up to altitude. A rubber band is needed for the Slingshot. Print Settings: Use a…
This is a clip to connect 2 PTFE-Tubes with an outer diameter of 4mm. It is not necessary to thread the filament through, the coupler can be clipped into the side. There is one with a stopper to keep the tubes from slipping through, and…
Update 24.04.24: deeper hooks, slim now recommended default A splash guard that extends the mudguard of your bicycle. It can significantly reduce the dirtying of the bottom bracket and parts of the drivetrain. No tools or modifications at…
A holder to display paper or cardboard signs or postcards. The space47 version is for a local computer club. The version 02 is with stabilizing pole, the 01 version without. It is fully adaptable with freecad.
An ergonomic, shock absorbing bicycle handle printed in TPU. It fits the standard 22.2 mm handle bar. With some tuning it can dampen rough roads. Materials TPU filament (TPU with hardness 95A to 85A), the softer the better! ASA filament,…
Update 25. Jun. 2021: fixed bug with only the sides rounded; this is also default now for better printing Description: This is a waterproof housing for the forumslader , a device to charge your USB device with the hub dynamo of your bike…
With this pipe you can extend the internal dust pipe to clean up after a job. You can reach almost all build space. The freecad cad file is included for your own mods. Printed upright, so you would need a printer with 260 mm build height.…
Mortarboard Additional materials: 4x M2x20 bolts 1x M5 heatset inset 1x M5 bolt for mount of decoration and tassel Rope for the tassel Any kind of decoration Printing Open the Freecad file and change the “circle_inner_diameter” in the…
Update 11/2021: Added a stronger drive gear, since the normal one failed. For this one you have to get the orientation right. In any case I recommend printing in ABS and checking the screw regularly to prevent coming loose. Reitec…
This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…
This is a holder for the auto rewind spool holder ( https://www.thingiverse.com/thing:3781815 ) to put in the lock & lock airtight food containers. It prevents a filament mess while the MMU2S is rectracting and keeps your filament dry.…
A parametric model to keep your phone safe on round wireless Qi charging pods. This is done for 94 mm diameter charger and a Google Pixel 8 phone. I have my phone in a cover, but should fit without just fine. To adapt use freecad and…
This is a quickly cobbled together tensile strength test bench for 3d printed samples. It uses the same samples as Igor from mytechfun so the results should be comparable. I got some inspiration from here . You will need: 2-pole on-off-on…
A splash guard that extends the mudguard of your bicycle. It can significantly reduce the dirtying of the bottom bracket and parts of the drivetrain. No tools or modifications at the bike needed. There is a regular and a slim version.…
This is a mount for the vertical bushing of the Anet A8. You can fit a light, a camera holder, etc on it; you just need a 6.25 mm hole in it. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.1 Infill:…
This is a device to test bicycle hub dynamos/generators and its respective electrical loads. This way you can test bicycle lights and phone chargers while respecting the real-life characteristics of the dynamo. Update: Fixed a bug Added a…
This is a low friction filament guide for the Anet A8. It dampens the filament flow at fast printhead movements and distributes jerky movements to a longer timespan to account for the inertia of the spool. It consists of a clamp and a…
This is a spare ferro rod (fire steel) holder with whistle for the Bibury 2038B (22-in-1) Multitool. I didn't find the original 5mm rods, so I also put 4mm and 6mm diameter. For the 6mm you need to "pre-use" them to flatten and make them…
These are all currently available results.
