Counting matching models…
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
Newer Version available This bearing works well but I revised the cap interfaces to get a tighter fit and better lateral fit, see: https://www.printables.com/model/1715172-a-better-608-bearing Description This 608 bearing is entirely…
A friend asked for a hot wheel dual track with 8 mm spacing for Monster Trucks. Inspired by https://www.thingiverse.com/thing:1797697 (thanks!) Added a latching mechanism (with a single button) Added rails on the top side to minimize…
Started to explore a roller bearing for integrating into a single-print-in-place fidget spinner (see https://www.thingiverse.com/thing:4876658 ). After looking at a few 608 bearings from Thingiverse (see below for references) decided to…
Wanted to design a fidget spinner that was low friction and completely print-in-place. The spinner is build around one of my 608 bearing designs (7 roller asymmetric cage), see https://www.thingiverse.com/thing:4876635 Clearance in the…
Did you build the Hill Mount for Hadley and still have the remaining 2 feet of pipe laying around? Print a few more parts and further stiffen your telescope mount. Are you planning to build a Hill Mount and like it to be even sturdier…
Description This 608 bearing is entirely made of filament, easy to assemble and customizable. It is robust, tight, and runs very light. The parts are easy to print on any regular 3D printer with a 0.4 mm nozzle. This bearing uses filament…
Modified the threads of Skadis T-nut mounting system to fit UNC #6-32 screws. I have bunch of (USA) electrical face plate screws so modified the design; it works great for robustly mounting things on the Ikea Skadis pegboard. Thank you…
Are you annoyed when you switch eyepieces to take a closer look and have to adjust the Focuser every time, and sometimes lose your target? Try the Turret: set the focus for each eyepiece once and leave it be! Much easier, and more time to…
Primo bottled water is a great option for water at a campground without potable water, especially in combination with a pump. The water container is big, robust and easy to carry. Primo White Water Cooler Pump (at Lowes) I wanted to be…
An adapter to fit a 16 Oz can in a 12 Oz Yeti Colster can cooler (https://www.yeti.com/drinkware/can-insulators/colster-12oz.html) Optimized threads It works with the existing top gasket for a perfect can fit Grooved shape for a nice…
This 61 mm aperture mask works as filter to reduce the brightness of the moon. It reduces the amount of light entering the telescope by 75%. I found the full moon quite bright to look at and leaving an afterimage, even after letting my…
Do you have a jar of coins collecting dust on a shelf? Put them to good use! This counterweight for Hadley uses a stack of US cents, euro cents or other coins as a cheap and readily available mass. For a general-purpose version with…
This 606 Mini Bearing (17 x 6 x 6 mm) is entirely printed, easy to assemble and customizable. It is robust, tight, and runs very well. The parts can be printed on any regular 3D printer with a 0.4 mm nozzle. Advantages This assembled…
This telescope mount has an integrated Azimuth rotation. The design is a remix of my prior remix ( Z-Brace - a stiffer Hill Mount for the Hadley Telescope ). It adds Azimuth rotation with only a few extra parts. The new mount design has…
Wedge Mount for the Unifi Doorbell Lite to optimize the angle, as an alternative for the original wedge of 20°. Details Optimized for easy printing and strength STLs provided for 15°, 20°, 25°, 30°, 35°, 40° & 45° Configurable F360 file…
This sleek & sturdy desiccant holder prints fast and uses only 8 grams of material. It is optimized for spiral vase mode, with wide louvres for great venting. Cap with a quarter turn bayonet closure and a secure snap 50 x 50 mm. size;…
Description This novel emergency whistle is integrated with a clip. It easily clips on & off your keychain, without fiddling with the key ring or a separate clip. There is a small (0.2 mm) gap in between the two sides that allow the clip…
This counterweight for Hadley uses BBs, lead shot or other heavy bulk media as a cheap and readily available mass. For using coins see Counterweights for Hadley, using coins for weight. It makes it easy to balance the telescope when…
This novel emergency whistle is integrated with a clip. It easily clips on & off your backpack or keychain, without fiddling with the key ring or a separate clip. There is a small (0.2 mm) gap in between the two sides that allow the clip…
A mail holder for Skadis using two (or more) arms. Printing Instructions Print two (or more) arms Default print settings work well, any material should work; I printed it in PLA The hooks are slightly asymmetric to aid in easier support…
Description A mail holder for Skadis using two (or more) arms, simple and effective. Printing Instructions Print two (or more) arms, no supports required Default print settings work well (0.4 mm nozzle, 0.2 layer height) Any normal…
Need a simple slim tablet stand that works in many orientations without fidgeting? Here's a stand with four build-in angles: 10, 20, 30 & 45 degrees. Give it a try. I couldn't quite find one like it among the many tablet/phone stands on…
An easy and quick coupler to connect a 4 mm PTFE tube to a dry box. The tube press fits into the coupler. The coupler has a conical opening to easily feed the filament. Hex nut and connector to easily tighten them Printing instructions:…
A friend lost some of the feet of her (Amazon) chair and kept sinking in the soft snow; so made these and they work well. Fit 16 mm diameter legs, check yours (note: different diameter than Helinox or REI chairs) The feet replaced the…
Description A Mail Holder for Skadis using two (or more) arms; simple, effective and easy to configure. Printing Instructions Print two (or more) arms No supports required Default print settings work well (0.4 mm nozzle, 0.2 mm layer…
This is a replacement button for the Crisper Drawer of a Kenmore / LG refrigerator. The pivot pins broke off on the original button after 10 years of use so I designed this; it works like a charm. The button is designed to fit Kenmore…
This Spool Roller fits the standard Mk3/4/4S Holder Mount Arm. It uses printed or metal 608 bearings to provide a much smoother rolling action for better filament feeding and more consistent printing. Filament spools went from plastic to…
This SUP Can Holder fits a can with a koozie, to keep your drink cool. I have used it extensively this summer and it works great. The can holder has two slots for the bungee cord to hold it in place (single or double). I also made a…
Description This SUP Can Holder fits a can with a koozie, to keep your drink cool. I have used it extensively and it works great for a nice day on the water. The Can Holder has two hooks to fit stiffer SUP bungee cord(s). The continuous…
These are all currently available results.
