Counting matching models…
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
Description The microSD card of the Bambu Lab X1 is a bit too deep inside the touchscreen; this tool eases extraction and insertion of the microSD card. I don't want to risk damaging the device by messing around with a sharp object or a…
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
Minimalist fan mount for the Creality Ender 2 Pro . The default hotend shroud is beautiful, but you can also barely see the nozzle and printbed when performing bed leveling. In addition, the fan shroud blocks the inlet of the part cooling…
The nozzle of my Numatic Hetty had a tear in it and was on its way to become unusable. I couldn't find a replacement part on Thingiverse, and Numatic only sells the whole hose. I designed this replacement part and it is a drop in…
Many mice in the Logitech G-series support contactless charging though the conductive magnets that hold the little puck to the mouse. This contraption allows you to put the mouse on a stand when you are not using it, and charge it without…
After usage, just push the key into the hex skirt of your printer. To use it, simply pull it out. I designed this for Bambu Lab X1C tolerances, but it prints fine on the Voron V0.2r1 as well. Print in either ABS or PLA, both works fine.
Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…
Humidity/temperature sensor holder for a standard Creality 3D printer enclosure. Snaps right onto the metal bar at the side, so you can change the Z-angle how you want to see it. This is compatible with standard size humidity/temperature…
Print at 0.2mm layer height, 5% infill, two walls.
A touch screen stand so your DWIN touch screen may stand alone from the printer itself. I printed this because I have a CR-6 DWIN touch screen on my Creality CR-10 Smart with BTT SKR board and I like the touch screen better when it is…
This model allows you to mount a Bondtech LGX in a direct drive configuration on your Creality CR-10 Smart. This mount allows the strain gauge still to bend and allow leveling. Step file and Fusion 360 archive included. Please adhere to…
A simple end cap to use after you've replaced the DWIN touch screen with a BTT touch screen . All existing end caps I found didn't fit very well. This one is simply printed and screws into place with the existing bolts. Print Settings…
This allows you to mount an Adafruit 8-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I developed this for the Creality CR-6 SE, but it should work on any Ender 3-like printer with a 2020-extrusion. There is…
This is not standalone, combine this with the Ultimate Filament Respooler . Print it, and stick it on it. It is flat, but holds just fine.
The LG Magic Remote 2021 (?) suffers from an issue that the navigational/arrow keys eventually need to be pressed harder to be registered. This small shim allows the arrow keys to work again.
A mount that allows a PC2 1.75mm bowden tube coupler to the place where your extruder used to be on a Creality CR-6 or CR-10 Smart printer. This allows filament to be led from the side of the printer, to the direct drive extruder. This is…
A simple adapter to fit a beach parasol in a standard parasol socket. Dimensions of beach parasol: 25mm diameter. Dimensions of socket: 36mm diameter. Height of adapter: 100mm. Fusion 360 archive and step file is included to allow further…
The standard knobs for the propeller and mixture levers on the CH Flight Sim Yoke are gray, which is just boring! These replicas allow you to print them yourself in the right colors - which is generally blue for propeller RPM and red for…
Some kitchens, like mine, have a fluorescent tube hanging under the kitchen cupboards. In my case the end cap had broken off. This endcap snaps in place and essentially bends the electrical contacts so they are in contact with the tube.…
We have tubes for central heating near the entrace of our house. This allows you to mount the IKEA Tradfri motion sensor there. Simply print it, and stick it into the back of the motion sensor. It will hold by friction fit. Then press it…
Based on my IKEA Tradfri button template A simple shortcut button made for the IKEA Tradfri remote so I could turn it into a shortcut button. Print settings For the colors, use M600 color swaps between the parts. This is perfectly doable…
A smaller height foot for the Creality CR-10 Smart filament holder. This allows you to mount the filament holder in a way so it can rotate 90 degrees the other way and it is still supported properly. This foot also fits Creality CR-6,…
The shelf/plank holders of our kitchen Bruynzeel cupboards were broken. I needed both left and right sided models. The shelf plank height is about 16mm, the metal rod is about 5mm diameter. Included Fusion 360 archive to allow tinkering…
Remix of the insert for the IKEA Mala paper holder . I didn't have the original IKEA board, so I needed longer inserts. In addition I needed thinner inserts because the roll had a smaller inner diameter. These inserts are 10cm long and…
In my bathroom I only have one outlet, and I like to charge my Philips Sonicare toothbrush in the bathroom. The cord of the charger is too short to let the charger sit on the plank below the outlet, and the low weight of the charger and…
Print in 95A TPU, bottom 2 perimeters with concentric infill. Top part that slices into the compressor with full perimeters. It is friction fit, but better friction than the original feet. You can, of course, glue it if you wish.
"Klik aan klik uit" remote holder which fits on a magnetic base plate of IKEA Tradfri. Inside the model there is room for 3 rare earth magnets of diameter 5mm and height 1.75mm. You need to insert them during the printing process. Print…
Feet Print in 95A TPU. Use at least 4 perimeters. Put into the bottom and use a self-tapping screw from the inside to fix it. Bottom plate mount Drill M5 holes into the bottom and use M5x20mm (or longer), and fix them with nuts.…
Extension wrap for a COVID-19 Face Shield. Fusion 360 archive included to allow further tinkering. Print Settings Printer: BIQU B1 Rafts: No Supports: No Resolution: 0.2 (or dynamic) Infill: 100% Filament: SUNLU PLA+ Black Notes: Print…
My girlfriend keeps piling rolls of gift wraps on top of my book closet. A girlfriend can't be fixed - but I can prevent more rolls of gift wrap from hitting my head. Print Settings Printer: BIQU B1 Rafts: No Supports: No Resolution:…
These are all currently available results.
