Counting matching models…
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body. The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. It's designed to be printed in ABS, as the little LDO motors get Hot, and to be attached via a Female-Female M3x15mm (if you have an OS2) or M3x20mm Hex…
Remix of my iPhone 15 Pro Case, but for the 15 Pro Max - I dont have one to test on, so please let me know if any adjustments are needed. ---------------------------------------------------------------------------------------- Ultra Slim…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
Ultra Slim case for the iPhone 15 Pro. I printed mine in clear PETG. If you want to print it in Prusa ASA, just scale it by 100.3%. This case is so slim that MagSafe charging and MagSafe mounts work the same as if you had no case at all.…
Voron Afterburner + Orbiter v1.5 + BLTouch for Anycubic Mega Zero & Ender 3 This is designed for use with an MGN12H Linear Rail on the X-axis. I made this compilation with modifications as most of the components I found had issues of some…
Kobra S1 top lid holder for use with filaments such as PLA where you need to let the heat escape - this allows for a lid opening of around 20mm and will work with most ACE Pro risers. Print in place hinges for a quick easy print. To…
Simpler 3.5" Floppy Drive or Gotek Flash Floppy drive case for the Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Should also suit Amiga 500's and other…
This mod comprises 3 main parts, the SB Linear Rail Mount, X-axis end-stop mount and a BLTouch mount. Ender 3’s don’t require the end-stop mount. UPDATE : I've now created an optional internal Mount for the Biqu / BTT MicroProbe This is…
AnyCubic Kobra S1 Bed Carrier upgrade - use: 4mm thick 3K Carbon fibre for the CF version 4mm thick 7075 Aluminium, or Mild Steel for the Metal version The squarish CF version is my design, the more triangular Metal version is by @Kanrog…
UPDATE: I've added the "Compact Crash Leveler" remix by @foureight84 This is designed to fit all 3D Printers with Dual Z-screws that use 40x20mm Extruded frames. eg Anycubic Mega Zero, Creality Ender 3 etc This will allow you to level…
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a…
If after installing my “ Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing ” mod, you still have Z banding on your E3, this should fix any remaining issues. These mounts allow the correct vertical motion to be obtained while…
My entry into Major Hardware's Fan Show Down S5. I’ve redesigned basically everything except the “base-plate”. I thought it’d be fun to make a new version for MH's new testing rig. This version is using a NASA inspired Low Speed…
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
I've simplified this design for easier milling on a CNC Machine or metal 3D printing. A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. The EBB36 mounting holes are designed to be tapped with an M3 tap. It's…
Re-mixed to suit a Standard 3.5" Floppy Drive or Gotek Flash Floppy drive connected to a Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Cable Kit:…
Filament Port / Bowden tube Coupler Adapter allows you to keep the door on your printer while using larger Filament Spools. It's designed so that you can still use the 0.5kg spools internally if you want to and it wont get in the way. I…
A simple print to ensure your MGN15 Linear Rails are installed parallel with your 2040 Aluminium Extrusions.
I love our Ecovacs Deebot N8 Pro with Auto-Empty Station as it's great for cleaning up our dog's hair that they are constantly shedding. However, I noticed that frequently the debris it picked up would not be removed from the bin by the…
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
This has been remixed for use with the Powertec 70130 dust collection hose (1" / 25mm Internal Diameter) from Amazon and to use readily available 12.7mm x 3.175mm Neodymium magnets. Update - Jan '25 : Added support for normal 1.25" / 32mm…
This is a wall mountable CNC Router Bit Holder. Holds 21 bits in tubes up to 13.6mm x 13.6mm. It's designed to be printed on it's back with no supports.
Notes : This upgrade assumes you already have the main components for a 3018 to 3040 upgrade. eg 3018 Pro to 3040 Upgrade If you use 450mm Linear rails, you'll need the "End Block" If you use 500mm Linear rails, You'll need to cut them…
My dial indicator is 57mm and a large top protrusion, so I changed it to 57mm diameter - only 1 bolt is needed for retention. Print orientation IMO is best face down, with the retention tabs sticking up. Remember to home your printer…
I Mirrored the Ender 3 version so it can be installed on the left-hand side of the AnyCubic Mega Zero and not interfere with the Printer. Print Settings Printer: Anycubic Mega Zero Rafts: No Supports: Yes Resolution: 0.2 Infill: 10%…
This is a slight remix of a design from Thingiverse.
This is a remix of the Dust Shoe by @Birbou - the main changes are as follows: Flush mounts against the bottom of the Spindle Motor to minimise Z-height loss Sweeper Section mounts Magnetically using 3x2.5mm Neodymium Magnets Less parts…
This is a Remix of the Bullseye Blokhead. I'm calling it the "Slim Edition" as I've removed the chunky bits from the bottom to improve the visibility of in-progress prints. https://www.thingiverse.com/thing:2759439 It is ideal for use…
There are quite a few Amiga 500 Expansion Port Cover design out there but most don't fit very well (the port cover is not rectangular). IMO, my design fits even better than the original cover (see pics). I recommend printing these on a…
WARNING : This Upgrade requires you to basically gut your printer and rebuild the electronics from scratch. As such, it is recomended for Advanced 3D Printer Users with some electronics skills only. If you would like to keep your OEM…
This is a super-compact case for Shelly Dimmer 2's. It's designed for a 2-wire Lamp Installation so you can ditch expensive "smart bulbs" and use cheap dimmable LED globes or decorative Dimmable LED globes instead. You just need 4…
I went looking for a dust shoe design and I really didn’t like any I found - So I decided to make my own. My Design goals were: 1/ Magnetically attached Base (use 5x4mm magnets) 2/ Must be able to use cheap bristle brush inserts (30-50mm…
This version is designed for the Ender 5 and may also work with the Sovol SV05. You will need longer M3 Bolts to install this upgrade. Z-Axis Axial Thrust bearing Mount. The Axial thrust bearing combined with a rigid lead-screw…
Requirements : A Drill Press (this mod will be impossible with a hand drill). SCV10VUU Linear Bearings 8x M5 x50mm Stainless steel bolts 8x M6 x20mm Countersunk Flat head Stainless steel bolts 8x M6 x20 Socket Cap Head Stainless steel…
This 2 Button Arcade Joystick case has been designed for the Sanwa style Arcade joystick and buttons from Sparkfun. Update : I finally added a "Right Side" Stick option. CAD file has been included to allow remixing. Parts needed:…
This is a Remix - the various versions are: v8 = 2 Point Mount (The simple option) v14 = 3 Point Mount (now with a bigger cut-out for the 3rd wheel bolt) v18 = 3 Point Mount with extra Z height clearance for Z-Screw Anti-backlash nuts &…
Updated to v3, earlier versions had some mistakes in them. This is the sand screw. Designed for the beach umbrella with 25 mm diameter shaft. Supplies for 25 mm: 2 M4x30 screws 1 M3x40 screw 2 M4 locking nuts 1 M3 locking nut 3D printer…
This has been remixed for use with 1.5/2.2kW 65mm VFD Spindles and normal 1.25" / 32mm Internal Diameter size vacuum hoses and to use readily available 12.7mm x 3.175mm Neodymium magnets. Notes : Suction area has no reductions in size, so…
My entry into Major Hardware's Fan Show Down S4 EP11
I really liked the model this was based on, but it needed LED Light pipes IMO. I've also made the buttons bigger and fully supported - now they move consistently straight up/down. I've also made it snap together a bit nicer, so it's not…
Just a simple Nema 17 Stepper Motor Mount with integrated Axial Thrust Bearing for CNC Machines. The Axial Thrust bearing supports the flexible coupler and allows you to use a locking collar on the other end of the lead screw to help…
Update : I’ve released an improved, but slightly smaller, version (see remix section). I found the stock 100x55mm Kotto intake to be noisy (made a whistling noise) and not very effective. So I designed a 150x100mm Intake which makes a…
The Cable Strain Relief is designed to be placed over the Connector and Zip-tied in-place. I recommend using ABS or you'll have serious issues with warping due to the radiant heat from the bed. I've also included my STEP file if folk want…
I originally designed this case for my Anycubic Mega Zero v1, but it'll work on any printer and use either the original Mega Zero v1 LCD or the BTT TFT35-MZ Colour LCD. It includes space for a 40x40x20mm (or x10) 24v intake fan which I've…
Remixed: Elegant Arch MacBook Pro / iPad Stand It works with everything from 2013 MacBook Pro's to M1-M3 MacBook Pro's, and all iPad's. Does NOT require any supports, and works great in PLA.
This is a simple adjustable, tilting design for mounting the 5" DSI Touch Screen by Freenove to any 3D Printer frame and allowing you to use KlipperScreen. This is not a snap-together design - I wanted it to feel good quality and not be…
These mounts are designed to screw into your Spoil board and hold FR4 (PCB material) down securely for milling on your CNC Machine.
Anycubic Mega Zero + Orbiter v1.5 Direct Drive + Dual Fans + BLTouch System IMO The Orbiter v1.5 is the Ultimate Direct Drive Extruder (small, powerful and light). Here is my solution to use the Orbiter on your Anycubic Mega Zero with…
A simple CNC Case for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. Update : Version 2 uses M3 bolts to hold the lid on and has space for…
NOTE: You must have Mesh Bed Leveling or Auto-Bed Levelling to use these spacers. After having issues with my AMZ continually needing to be re-leveled, even with MBL, I decided to create these solid mounts so I never have to do it again!…
Just a very simple mod of the original CYD Dial Pendant Holder by @Guillaumenico for his FluidNC CYD pendant case . CYD Dial Pendant Wiki V2 Has been added - it has thicker walls at 3.5mm and lots more chamfers. CAD file has been included.
Raspberry Pi 3B Case w/ T-Nut Mount and 4010 Cooling Fan Print Settings Printer: Anycubic Mega Zero Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Cubic Filament: X3D Pro PLA White Category: 3D Printer Accessories
Commodore 64 Diagnostics / Dead Test Cartridge Case has been designed for the “ C64 Dual Dead Test & Diagnostic Cartridge & full test Harness ” designed and sold by Melbourne Console Reproductions. The LED is visible through the case and…
NOTE : I've changed the instructions to allow for use up to 50c. ----------------------------------------------------------------------------------------------------------- I’ve generally been pretty happy with this dryer, however, the…
A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…
This Gotek drive case is designed specifically for computers which use the larger 1.25” tall 3.5" Floppy Drive form factor. I've designed it to use a 128x64 0.96' OLED and Rotary Encoder with Push-button. You can also add a little speaker…
Ladies and Gents, This is my Dual Z Screw upgrade for the Mega Zero v1.0 . UPDATED : 29th March 2021 I have replaced only some of the OEM parts and tried to make sure critical parts are identical - here are the parts I'm currently using:…
A more advanced CNC Case with aircraft style GX16 and GX12 Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita…
Anycubic Mega Zero v1.0 Horizontal Mount for Mean Well LRS-350 Power Supply. I recommend you print these in PETG or ABS+ due to the heat generated by the PSU. PLA is likely to warp and sag. There are 2 options for the plug socket, one is…
This is a minor remix of Dan Anderson 's excellent design for the AD206 which has a thicker lens barrel than the AD407. ------------------------------------------------------------------------- There are great tripod screw mounts for…
NOTE : There are 2 versions of the arms and sweeper insert, pick whichever combination fits your machine best. This Dust Shoe is for the Makita 700 / 701 Router and is height adjustable, magnetic and designed for a 2080 based Z-Axis. eg…
85 Degree remix of the MacBook Pro Neck saver laptop stand. It's a bit taller and the angle is changed from 140 degrees to 85 to allow the screen to be better angled towards your eyes.
This X-Axis Linear Rail Upgrade is designed for use with my Orbiter Direct Drive System: https://www.thingiverse.com/thing:4856555 This uses an MGN12H with 300mm Rail. A neat feature for Klipper users is the dedicated ADXL345…
This is an X-Gantry Cable Guide for the Anycubic Mega Zero to keep the cable bundle away from the stepper motor and lead screw. It's shorter than similar designs for the Ender 3 and does not need to be mirrored when printing. I printed it…
Ladies and Gents, This is my Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is in 2 parts, one for the SKR Mini MZ (the easy version) and the Advanced version for the Stock Melzi Board. UPDATED: I've now included a compatible "PEI…
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the 6x CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making it more…
This Model lets you see more of your Prints via the built in webcam! The mount is designed to be glued to the wall of your printer. I used this cheap wide angle lens from Amazon. I've included a STEP file, so folks can modify it for…
This is an improved design with smoother intake ramp and despite being slightly smaler, is much more effective. It is however harder to print and does need supports. I found the stock 100x55mm Kotto intake to be noisy (made a whistling…
The Documentation for this build is a work in progress - I've included my CAD file (STEP and F3Z) to show how it all goes together as TBH I can't recall all the details. Optional Upgrades: StealthBurner for Mega Zero Orbiter v2.0 Mount…
iPhone mount for bike handlebar for phones with a case. Easy clip in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. You will need additionally 4x M3.5 x 16 screws (ISO 7046) 4x M3.5 nuts…
This is a Remix of the "Power supply mod for the Ender 3" by Proper Printing. https://www.thingiverse.com/thing:3773553 This power supply mod locates the Mean Well LRS-350 Power Supply at the back of the printer keeping things neat and…
Designed this ADXL345 Y-Axis Mount to superglue to the Y-carriage at the back of your printer. Print Settings Printer: Anycubic Mega Zero Rafts: No Supports: No Resolution: 0.2mm Infill: 50% Cubic Filament: eSun ABS+ White Category: 3D…
Please see my " Heated Bed Guide for the Mega Zero v1.0 (Melzi & Mini MZ) " for details on how to use these: https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:51938 UPDATE: v3 is lower profile and means you can…
Just screw this clip to the skirting board and clip your Auto Empty Station into it to prevent your Ecovacs Deebot from accidentally moving it around on smooth floors.
This is a Remix of 2 Different Designs: Filament Sensor Case by @STIG_ : https://www.thingiverse.com/thing:2443425 For details on how to install and use the Filament Sensor, please see the above Design. it's designed to work with the…
This is my 24v Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is for the SKR Mini MZ Board - the stock board is 24v compatible but lacks the power control MOSFETs for a heated bed. Major benefits of going 24v are: Faster bed and…
This is a very simple Hook / Hanger for Anycubic Photon Lids using a 3D printed handle by SnopSnapi . This version is designed to be screwed to a Wall. Also works with Wash and Cure Lids, and other printers, that have the same handle…
I made these to fit the Powertec 70130 dust collection hose and Vax Vacuum Cleaners to be used with Dusty the dust separator inlet/outlets. I've included STEP files to allow for easy modification.
The original holder for the on my spring style stand doesn't fit at all - So I designed a version to be printed in eSun ABS+. I recommend this be printed with supports on “Build Plate only". UPDATES : 29/4/2022 - v2 solves an issue with…
Note: Despite many similarities to another model on Printables, this is NOT a remix. It's a clean sheet design. BlueSCSI is an Open Source project: https://github.com/erichelgeson/BlueSCSI This Mount is designed to use M3 Heatset inserts…
This is a remix - the only change is to make it easier to mount using M4 bolts and T-nuts instead of needing to take your top frame apart for certain install orientations. Stepper motors can get hot so printing this in PETG is highly…
Remix to fit better without needing scaling. STEP file included. Couple brackets for the Anycubic Photon Mono X's power supply. Print 2. Install screw through bracket, there's a hole for a screwdriver. Screws are #6.
Anycubic Mega Zero v1.0 Bed Thumbwheels are a remix - I made these taller with inset M3 nuts specifically for Mega Zero v1.0's with Heated Bed upgrades that larger than the stock bed (via adapters). I recommend these be printed in ABS+…
This mount is for the Logitech QuickCam range that use a Peg style mount and is designed to work with this mounting system: https://www.thingiverse.com/thing:3809015 Print Settings Printer: Anycubic Mega Zero Rafts: No Supports: Yes…
This is a very simple Hook / Hanger for Anycubic Photon Lids using a 3D printed handle by SnopSnapi . It's designed to attach to a 20mm Curtain Rod using Zip ties to secure them. Also works with Wash and Cure Lids, and other printers,…
Just a simple stand to raise my Apple USB SuperDrive above my monitor stand. It's too big to sit on top of my M4 Pro Mac Mini and I still burn discs occasionally for my vintage macs and other machines. Update: v2 uses a lot less plastic…
The original holder for the T12 soldering iron doesn't fit at all - So I designed a version to be printed in eSun ABS+.
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the 4x CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making it more…
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the Doberman CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making it…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
This is a very simple print and is pre-broken up into 4 pieces that will fit face down on any printer with a 230x230mm or bigger bed. You will need support for the alignment tabs. Once complete, just glue it together and have fun! UPDATE…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
Solder Paste Syringe Holder Insert for YINGFU 5L Mini Fridge is designed to hold 30g / 10cc Solder Paste Syringes in the door pocket of your YINGFU 8L Mini Fridge. eg Chemtools SP100 Solder Paste:…
This is just a simple Tandy or Amiga Floppy Drive Height Extension designed to increase the height of standard height floppy drives to fit the less common 1.25” tall drive bays found on some Tandy 1000's and Amiga's. If you don't want to…
Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine. Update - 02/12/25 : Added a version that…
Non-articulating replacement Gripper for Tandy / Radio Shack Robie Junior
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the Greyhound CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making…
This is a very simple print and is pre-broken up into 7 pieces that will fit face down on any printer with a 230x230mm or bigger bed. You will need support for the alignment tabs. Once complete, just glue it together and have fun! It’s…
These are all currently available results.
