Counting matching models…
More coasters to populate your house with! As with my previous designs, each coaster has two variants, one with an inverted pattern. This time the coasters feature Celtic designs that will have you tied up in knots. (Get it? Cause they're…
Update: 7/7/2022 – Alright, this is a big one! All of the rails have been updated, new tactile surfaces have been added, and every rail has two variants: a default “free-spin" one, and a clicky one. All the rails have been rotated so that…
Update: 11/30/2023 - Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. Some canine coasters for your drinks to sit on. There are four designs and two…
Urithiru. The lost tower city, center of the Silver Kingdoms, now the center of your tabletop gaming adventures! This functions as both a dice tower and a dice tray, as the oath-gate platforms make the perfect spot for dice to land. The…
Update: December 1, 2021 – Increased part thickness by the back hole to improve strength. Adjusted where the rail sits to better mesh with the gear. Removed bottom tooth on rail to let the gear free spin. Widened axle cap hole slightly to…
Update 12/12/2023 - Added the Raya Lucaria coaster & the Carian/Crystalian coaster. Update 12/5/2023 - Added the Cleanrot coaster. Update 11/29/2023 - Added the Two Fingers coaster. Update 11/16/2023 - Added the Ancient Erdtree, Omen…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. After consuming much hot chocolate and devouring most of my…
I really liked the design and idea behind Lorro's Mesh Fabric Air Pot , so I modified my pot design to incorporate the pattern. This version will have the same root pruning benefits and can be used either by itself or with one of my…
Display the symbol of your order with pride, or let all ten orders shine together! These drink coasters are perfectly suited to hold your favorite beverages and protect your table from cup stains. I modeled these after the coins you can…
Bring the sky to your table with these amazing coasters! There are four main designs, each with a detailed and a simple version. There is also an inverted version of each of those, which means if you were to slice design and its inverse…
Update: 5/14/2022 – Added four spaces on the top of the frame to allow for easier removal of the inner pot. G-code has been changed to reflect this. Need a plant pot that barely fits the print bed? No Problem! Don't like the size? Scale…
Update 6-18-2022: I added a double-wide square tray for those who want to put two pots side by side without having to print separate trays. Continuing on the trend of small planters, I decided to create some that had the mesh walls. Thiis…
Update: 3/23/2024 – Centered & widened the six stands in the base of the frame. Need a plant pot that barely fits the print bed? No Problem! Don't like the size? Scale it down (or up if you wish) to suit your needs. There are two parts to…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. From the chimney of creativity comes the third of my holiday…
This time around, I have added a phoenix design to the outside of the pot. There is still plenty of mesh to allow air pruning of the roots. Essentially, when the roots reach the outside of the pot and meet open air, they dry up. This…
Update: 5/14/2022 – Added four spaces on the top of the frame to allow for easier removal of the inner pot. G-code has been changed to reflect this. Update: 12/01/2021 – Added a version of the frame that is just the tray for catching…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. This is the second of my holiday drink coasters I am…
A nice little planter that can fit practically anywhere! The side panel inserts allow you to customize your planter with whatever colors you want. You will need to print two of each size panel to fill out all four sides. There are three…
As of typing this, I've been making a lot of coasters, and I realized my simple coaster holder simply wasn't big enough to hold all of them. When I saw the model of Urithiru posted by Swinny , I had an idea. The result is a coaster holder…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. I made this holiday coaster for everyone to enjoy! It can be…
I added hexagons because they are the bestagons! The pattern is 0.2mm high and decorates the bottom of the tray. I also added a mount on the front for a nozzle holder that you may choose to use or not. It takes up very little space,…
After making my Lotus & Rose planters, I wondered if I could do something similar to my air mesh pot. Well, after some trial and error, I no longer have to wonder, because it worked! Now you can have the same root pruning benefits and…
Update: 6/24/2022 – Changed all of the number “IIII” icons to the correct version “IV” and modified the chamfer on the top edge to let multiple coasters stack more nicely. It may not help you keep track of time, but it WILL help you keep…
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. Joining the family is my fourth holiday coaster, sporting…
My soaker hose kept bending away from where I wanted it thanks to the sun's heat, occasionally landing on my delicate seedlings, so I made these hooked soil spikes to hold it down. Now my soaker hose stays where I put it, and my seedlings…
This is exactly what it sounds like, a small piece that can be added to the base of the Macro-Jack that lets it make distinctive clicks when you spin the gear. There are six versions, each with varying levels of stiffness. Number 1 is the…
Need a plant pot that barely fits the print bed? No Problem! Don't like the size? Scale it down (or up if you wish) to suit your needs. There are two parts to this, the pot (for your plant to sit in), and the frame (for your pot to sit…
So you bought a new plant, but you are not super thrilled with the generic thin plastic “pot” it comes in. How do you make it look more lively and interesting? Well, you give the plant something fancy to sit in, and that is where my pot…
Update: December 1, 2021 – Adjusted the outer rings on both models to provide a cleaner contrast. This extruder indicator features the ancient Aes Sedai symbol and can fit a 8mm x 3mm or smaller round magnet in the back. There are two…
Four more pots (maybe three?) for your gardening pleasure! The Rhombus and Hexagon II are two separate pots I created prior to melding them together into one of my other designs, the Rhombagon Spiral . The Balistra is something I did…
I like the filament catching capability of mkoistinen's bin , but I also like the front space on DavidGray's bin . I couldn't decide which one I wanted, so naturally I said both. This tray/bin is actually too big to fit on the Mk4 print…
Update 9/28/2024 – Slightly increased gap between parts to decrease friction. Passthrough illusions are really cool, and a fun way to add multiple colors to many items. In this case, I applied the concept to some planters, and I am really…
UPDATE – November 11,2021 – Added holders for 2020 extrusions, like those used on the Ender-3. I have not tested these, so if you use them let me know if I need to modify them. Every time I have tried to install something using t-nuts,…
Update: November 27, 2021 – I noticed that parts with tiny warped ends would scratch my mount, so I raised it up 0.6mm. I made some small tweaks to allow this to work with the Zodiac hotend. By proxy this should also work with the Phaetus…
I was playing around with cubes in my CAD software when I had an idea. Turns out part of that idea had a name: the Menger Sponge (…what?…) This 3D cubic fractal serves as the centerpiece for my new dice tower. There are two different…
This is a neat little holder for all of your pencils, pens, and whatever else may fit! Can be scaled to a different size if you wish. If printed using the MMU2, you can further distinguish the trees from the background. Print Settings…
This coaster holder is what your candles wish they could be (might want to ask them, just to be safe.) Not only does it fit well with your other Halloween decorations, it works with the whole of Autumn as well! I've made some coasters to…
After printing the sword Herugrim, customized by 117 Makes , I thought it would be nice to display it somewhere. I created this simple mount that doesn't detract from the sword's aesthetics and can be easily screwed into the wall. If you…
Featuring the icon of one of the greatest villains in Critical Role's history, the Whispered One's Atmos cooler cover will bring an air of darkness to your PC build. There are two versions, one with the ATMOS logo, and one without.…
Update: 11/18/2023 - Created bases with rotated text to match rotated plates. Update: 11/16/2023 - Added modified bases with bigger text that light can also pass through. Update: 11/13/2023 - Added Golden Order cover plates. Update:…
Update 12/02/2024 – Photoshoot. Update 11/30/2024 – Added Fusion 2. Update 11/27/2024 – Adjusted some tolerances and added new inserts. This is my entry for the 2024 3D Printing Industry Awards trophy. There are three primary things this…
After I bought a 2kg spool of filament, I realized I had nowhere to properly mount it. I did, however, have two of the injection molded spool arms. So, I endeavored to create a mounting system that bridged the spool arms, could hold a 2kg…
These are all currently available results.
![Macro-Jack [Clicky Rails Update] (7/7/2022)](https://media.printables.com/media/prints/231914/images/2128327_60ea8a33-1b2f-40ad-8ae0-4244c81783f2/20220701_120856.jpg)
