Counting matching models…
Here is another bomb I made. It's a little smaller and actually louder. https://www.printables.com/model/1098855-quad-whistle-bomb-for-rc-airplanes-and-drones Bomb drop can be downloaded here:…
It has 4 whistles that are really loud. It is 69mm tall and diameter is 20mm and fin diameter is 40mm. This is a smaller version of another bomb I made. Be sensible and don't drop over people or property. Print on end standing up. No…
I wanted a light and compact way to mount the SpeedyBee F405 Wing Mini flight controller on my arrow shaft Slowstick bi-plane. There are two different orientations you can assemble the flight controller, standard and custom. Depending on…
I created this small holder/mount for the Radiomaster RP4TD receiver. It just slides in and stays via friction. If loose just add a dab of hot glue or similar to the edge of the receiver. I print in ASA .4mm nozzle and .2mm layer height.…
Lightweight and low profile version of an all in one Walksnail Avatar VTX mount. Camera can be adjusted up and down. VTX mounts with screws provided with VTX using the 20x20mm mounting points. Use 3mm screws to mount the pod, or…
I couldn't find any RunCam 6 mounts so I created this to hold the camera and an adjustable base that will mount on a servo to provide pan viewing. Requires two M3x6 screws to mount the camera holder to the base. The base has a hole that…
Be sure to see my remix for updates , they are cleaner and better. The base is 30mm to give good purchase and stability. Depth into the control surface is 4.5mm. Height to lower hole is 7.5mm and top hole is 10.75mm. Larger horn has one…
Print 3 walls with 5% grid infill up to 44mm height and I add a height range modifier at 44mm to use 4 walls so it is nice and thick on the top to keep it waterproof. You could also just print the whole thing with 4 walls. I printed in…
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…
Fill with activated carbon to filter VOCs and odors from 3D printer exhaust. I made this specifically for the Qidi Q1 Pro. It fits in the external holder you can find here.…
I needed some light wheels for a RC airplane I built so I designed these. I started with the hub diameter of 8mm and thickness of 8mm and diameter to outside ring (tire) at 70mm and then changed up the design inside. I made the outside…
I made these for my RC planes so I can put in my vehicle and not have them roll around while in transit to the flying field. There are 2 sizes that will accommodate most planes. Small one is for planes with up to 2.75" tires and the other…
Weight of pod with Walksnail HD Pro system installed is 49 grams. I printed in ASA since it is lighter than pla and petg. Mount the Vehicle Fixture on model. Use mounting screws through Slider and Base into VTX (gluing Slider to Base is…
Fits the standard GPS cutout location on the AR Wing Pro. It is a friction fit, but I recommend using a bit of glue to secure it.
I have a small form factor version as well. Get it here . Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Screw VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Holder…
Lightweight and low profile version of an all in one Walksnail Avatar VTX mount with camera pan ability. Camera can be adjusted up and down. The camera mount press fits onto a 9g metal geared servo output shaft. It is secured with the…
This version works great for balsa, cut foam and coroplast control surfaces. You can also use on foamboard, but I have a glue-on version that works great for foamboard. You can see it here:…
I wanted some snow skis for my mini slow stick so I designed these. The light version was my first design and is 8 grams. I decided to make it a little stiffer and added the center rib. It strengthened it quite a bit and that version is…
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body Lite+ with 2 of the short screws included in the kit. The Cam-Top attaches to the Body with 4* M3…
They are 1.6mm thick with a 2mm thick ring around the connection hole. Holes in base ‘rivet’ it into surface with hot glue. Each have 1.5mm or 2mm hole option for different size pushrod or attaching a quick link. File name indicates…
I made this to mount a servo to my landing gear to then mount my FPV camera allowing a pan functionality to the camera. It could also be used to mount a servo anywhere you need one. Mounting hole distance is 44mm and hole size is 4.6mm to…
These mounts slide onto a carbon fiber tube to mount the horizontal stabilizer on RC airplanes. Specifically a DLG. Pick the one that fits your carbon tube. Made to be a tight fit and you may need to drill hole depending on printer…
I made the chamber fan duct and filter holder and wanted to also be able to close it off to keep the heat in better when heating the chamber. You can get the related parts here…
I needed a holder for a 15.6" portable monitor that could mount to a tripod, so I came up with this. Cut into 3 parts that can be printed on most printers. I printed in ASA with 4 walls and 15% gyroid infill. Print middle on its back and…
I had a LH-360W power supply from an old 3D printer that I was using to power a battery charger. I decided to print a mounting box for it and add some binding posts and a power switch. I forgot to dimension the cutout for the power switch…
Sometimes you just need a little reminder of what you programmed all the switches to do. This helps for a quick glance, especially as a pre-flight reminder. Print a few for your different configurations, or print one and swap out the…
Simple 80mm fan holder for use as solder fume extractor, keeping a VTX/electronics cool on the bench, or a simple desk fan. Can be printed with any material. Requires two M4x15 screws and nuts to attach feet. I used M4x20 since that's…
Standard 1/4-20 bolt tripod mount for the Walksnail VRX.
As you can see from the pictures, I should have added these before I broke both tips off. Oh well, this should help going forward. These are designed for the Arrows Husky RC plane, but likely to fit other models as well. Print it and try…
Qrome designed a fantastic model, but I needed some parts specific to my hardware. This is his model design. https://www.printables.com/model/759660-slow-stick-fpv-plane-with-carbon-fiber-arrow-shaft For this model I plan on using…
Prints with no supports. You will need a M3x10 or M3x14 screw to attach the handle. Leave it a little loose and the handle will spin. Glue the Drill Post in the center of the reel if you want to use a drill to speed up the winding…
I made this for the Walksnail Avatar Pro FPV camera. That cam has two mounting screws per side. One is solid mounted and the other offers swivel in the groove to set the tilt. If you have a 19mm cam this should work. I also have a single…
Fits the common hobby size hex drivers and other various tools and marking instruments.
Clamps to tripod leg then clamps to power bank. Can be used for other items that fit the size. Printed in TPU with 3 walls and 15% cross hatch infill. Will need two M3 screws and nuts, one 12mm long and one 16mm long.
I made this for a FR632 video receiver for FPV. I wanted to hang it off the back of a portable monitor. Hook will fit a 10mm thick monitor. Insert M3 heat set insert into the hook part and use two M3 screws to attach to the body. Pocket…
Attach to firewall/motor mount plate and insert into fuselage. Align the post to the angle required and glue firewall in place. The long post allows you to pull the firewall forward for a tight fit in a plane such as a glider that has a…
I have lots of the 200g variety spools and the normal spool holders were too big. I made these specifically to fit into the Sterilite 20qt container, but they could fit others as well. I made the 120mm holder double stacked so you can…
These are all currently available results.
