Counting matching models…
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…
Vertical Stand for Oculus Quest2. Foe added functionality see: https://www.printables.com/model/404773-oculus-stand-vertical-elite-add-on
File Folder Organizer expandable.
Mechanical counter, three wheels, remixed from https://www.thingiverse.com/thing:4749770 Made it to track the hourly usage for the pressure washer/lawn mower, so I can time the oil changes. Jan 08/2022 Corrected incorrect files with the…
Do not like the purged filament hanging of the print bed? . . This is one option to contain it. It will not hang about, but it will still need looking after. Update 1: New larger size, which looks a bit better in my opinion. Update 2:…
Miniature Tesla Turbine. Will work great with real bearing but can be tested with the mock-up bearings provided. Also available here: https://www.thingiverse.com/thing:5176460
MK3S- Frame Tray Corrected lock rails fit issue noticed on the orig, added chamfer to clear ribbon cable, reduce lock rails, to reduce filament used.
Golf Ball Retriever made for the putter grip. Need to inject some sort of putty through the grip hole and use a wood screw to secure it once the putty hardens.
I made this after I realized the one I liked and remixed was a replacement of the original grip. No parts removal or fasteners required. Position the two halves as shown in the pictures and thread the tube (tighten as hard as you can).…
Added left side with SD slot. For the smaller add-on see: https://www.prusaprinters.org/prints/122767-sidebox-sidekick
PrusaXL Purge Tray R1 Few people had issues installing the original. The two clamps options are designed to grip the bed tray outside the foam protected area. The tray is spanning across the print bed retained by the two clamps. Use the…
Simple Milk Jug with feature to retain the milk bag corner
Stand for Mitutoyo Caliper, or other similar brands. Needs some gluing. Based on: https://www.thingiverse.com/thing:4807344
Work in progress pending testing!-Uploaded V2 to address the meatballs size. Meatballs Mold - presses 38 meatballs at once. Models are scaled down to 88% to fit on my i3 MK3S+ The hinge pin is a 8mm shaft, identical to the one supplied…
Following testing I noticed it is difficult to press more than 7 balls at once so I made it for only 6 and also made it Print-In-Place, which makes it possible to scale down/up for your desired meatball size. It took a bit of force to get…
I did not wanted to remove the screw for the electronics mount cover so I made a MMU2S Reset Button that attaches to the USB slot cover, also dubbing as a removable cover for the USB slot.
Lighter Case With Cigarettes :-) Identical to one of the originals except it exposes the lighter 1-st
Few Fairphone 3+ cases. I made them from Flexfill 98A and they are very pliable. I was impresses how well this flexible filament is, strong and malleable - it takes a while to sort out the extruder idler preload. For me on my MK3S+, 1…
Slightly more than 20grams of filament but way easier to hold in your hand.
Dust Protector for Prusa I3 MKE Z-Motors. -Single part for left/right with option for the mating plane (V1 is the same as the original) -Tighter fit around the spline screw and the guide rod: 8.8mm for the spline screw / 9.0mm or the…
Bathtub Drain Hair Trap with removable cavity bottom cover. Not sure how good of a job does as I am testing it still. 2021-12-29 New versions with modified draining slots to increase the openings area R1 2021-12-30 New versions with…
New Year new MMU! New mounting brackets for MMU2S unit to allow relocating the CCA under the main unit such that the LED's are visible if the printer is set higher. Uses same hardware as the original. For a fancier F# display see:…
It is identical to the awesome original except every piece can have its own color.
Various spacers for MK3S+MMU2S to support PTFE tubes management.
I still believe the one KmanSweden made is the one Prusa should include in the MMU2S kit. This version does not require removing any components, but does the job.
Tube Straightener - 4mm Dia I made it 4mm hoping will help me straighten PTFE tube, but it does not work. I decided to post it as it can be used as a benchmark for remixes to larger diameters useful for straightening copper tubes. Update…
Keurig K-Cup Stand Made for 8x22x7 bearings
Knob-MK3S with central clamping based on original part. V1 is closer in size to the one winged original. Very good snap fit.
Simple toilet base bolts thread on cover so it no longer falls off when I clean the floor. Category: Bathroom
Keurig K-Cup Rotating Stand for 15 pods Need two 8x22x7 bearings It is a long print, and I will upload it once finished :-)
Prusa XL Filament Dry Box Take 1 Uses the supplied filament supports. At the moment is not really airtight but considerably reduces the filament exposure to humidity, if silica gel pouches are place in the box. Require PC4-M6 couplings.…
I think they are a bit large but my wife says they are OK, if they are slightly flattened, so I guess happy wife happy model. Meatballs Mold - presses 13 meatballs at once.
Buggy Benchy - added spinning wheels that can be printed separately and thread in
Had some time and had some fun! Will likely need to add some details but only after the Golf courses open :-) Should work with 2.5 x 14mm dowels Based on:…
My broom handle broke so I made a replacement. Comes with two options: simple handle and with added core. Two X Two options uploaded. I kept the rotating hanging eye; need to cut the small tabs after printing and it will release very…
Microwave Cover for Food / Anti-Splatter / Finger grips. Both are 65mm tall. The 210mm dia is the largest it can fit on MK3S. Material: Transparent Polypropylene (PP) or PETG
Laptop Stand Angle Adjust/Foldable; Print-in-Place Made it for my work laptop so I can adjust the screen height with the other monitors I use.
SSD Drive Adaptor 2.5" to 3.5" This is a remix of: https://www.thingiverse.com/thing:3094581
This is an add-on to the https://www.prusaprinters.org/prints/110448-mmu2s-relocated-cca. For the shaft I used one of the aluminum tube supplied with the MMU2S filament spool holder. If you do not have one you can print the one included…
Bathtub Drain Hair Trap, final take, evolved from the initial take: https://www.printables.com/model/107883-bathtub-drain-hair-trap Final take, easier to clean, works just as well as the other takes but allows better flow.
Taller narrow section, allowing the deeper screw to seat closer to bottom face so the spring is not compressed unnecessary. Made it because the original did not work for me.
Oculus Stand Vertical - ELITE Add-on Add-on to https://www.printables.com/model/107902-oculus-stand-vertical to help supporting the heavier ELITE strap.
I made it for the 16-Cup Rubbermaid such that the cup does not need any modifications. Cup link: https://www.amazon.ca/gp/product/B00BEUDWI2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 The hub adjust continuously from 38mm to 79mm, the…
Bug-a-Salt LASER Pointer Mount Convert your gun into a high accuracy Bug exterminating weapon! LASER on/off switch to follow!
Manchester City Badge Logo Multicolor 2mm THK Added few more white layers.
The model I remixed had no support for spare razors, it was generic.
STOCK MMU2S - Filament # indicator! Snap-on "cam-follower" design - flip in/out tag displaying the filament # in use. Onl y one part needs to be replaced! For the shaft I used one of the aluminum tube supplied with the MMU2S filament…
Gutter-Hooks-Assortments Did not find any to fit my gutters so made some that work for me.
Increased diameter to 54mm, with rounded the edges all-around, along with added holes for key chain or a string to tie it to the fridge handle, or the BBQ. The files are made for MK3S+ &MMU2S
FINDA cable guide for “MMU2S Relocated CCA” For all the upgrades see: https://www.printables.com/model/110448-mmu2s-relocated-cca
Ceramic Blade Handle. I used a long time ago a steel blade and had only bad luck with it, cutting through the coating for the print bed. I switched to a Ceramic blade and no longer had any issues.
PrusaXL - Simplified Nozzle Size Marker R1 Still only two parts - simple snap in retainer, with improved indexing spring.
Added folding / spinning wheels that can be printed separately and snapped in. The 3mf files do contain custom supports and multi color prints. The boat 3mf; Amphi_Benchy_R4.3mf, is for Prusa MK4S while the wheels 3mf;…
Bottle-Rack aka Flaschengestell, no pins or glue needed. Fully expandable like the original. Have not tested the whole build height but 3mm tall pieces join well. This is a long print, but if you needed it who's to say where the limits…
Gutter-Hook R4, reduced underneath length of the clip as may previous versions broke when installed.
Handle For Plastic Bags Testing in progress
I never thought that a wiper/cleaner is needed if the filament is in a dry box, and the path to the extruder is fully protected with PTFE tube. . . . until I noticed some hairs caught between the filament coils and dust on a freshly…
PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type
Loved the original raiser(ruler) but I like my keyboard higher, so there is the thing. Category: DIY
Gridfinity bin for ¼" socket set with additional slot for extra extension
Logitech C525 Privacy Cover, with add-on 6mm x 2mm magnets to retain open closed positions.
Real Madrid Coaster, Multicolor The 3MF files was created with PrusaXL profile.
Added two tabs beside the central latch to make it easier to open. Added recess around the nozzle to make it easier to grab. Small changes to the hinges and the central latch. Need to be careful and slow when braking in the hinges.
Prusa XL Filament Dry Box Replaces the supplied filament supports, using the same size screw. Require PC4-M6 couplings and dia3 x 10 mm long dowels for the filament rollers. (optional can use the pins available in the .3mf file) Sizing…
Cover for Side-Box Prusa i3 MK3S - Left-Right. Colour .3mf included, as well as g-code. Nice addition to the side-box; https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right. Note: I got a little colour bleeding…
PrusaXL_Extruder WHA/PTFE Inline-Clips Snap-In design, two pieces only. Designed to keep the wires and the PTFE tube within the guiding spring width. Should help reducing the tangle between the different tools. Update: Following some…
If your glasses temples dig into the skin above your ears, this may be something to consider. They fit temples 3.4mm wide by 1.5mm thick. The g-code is for Filamentum Flexfill 98A R3a has a tighter fit on the specified temples and clamps…
My take on the “Filament clip with Print-in-place” "R0" - similar to the original; taller with stronger CAM lever. "R1" - increased the clip radius so it can fit easier on spools with a lip, and slight increase on the hinge diameter. "R2"…
Prusa XL Camera Mount with wire clips Camera mount is designed to to be placed on the top and uses dia8 x thk2.5mm magnets supporting cameras that have the 1/4-20 TPI tripod thread mount. Clips are designed to be placed on the top of the…
Simple cover for 8mm dia X-Acto Knife Handle which also dubs a Filament Cutter. The larger opening is only an aesthetic feature and if not comfortable seeing the blade there one with only the smaller hole.
PrusaXL - Simplified Nozzle Size Marker Only two parts - simple snap in retainer. See the upgraded version: https://www.printables.com/model/761237-prusaxl-simplified-nozzle-size-marker-r1
Simple Pi Zero-W Case with stand with Pi-Hole logo, Camera/No Camera and a wall mount for the Camera Configuration. Category: DIY
Apple 13Pro Dock - Charger for the supplied cable. Category: Mobile Phone
Spring rebound limiter for Universal Auto Rewinder. Added gears to limit the spring recoil. For the pinion shafts I used PETG filament cut to length. So far it is working better then the option without. For the other components see the…
IP-CAM Network Plug Cap, to protect unused connector from dust, bugs and maybe water (depending on the material used)
Even Batman needed a Side Kick, why not the Prusa Box Different widths included. Use mirror to make the one for the opposite side. Let me know if you need specific dimensions as I made it to fit my environment.
This mix is the Prusa model printed with 6 perimeters and zero infill. The orig just had some negative volumes and an added torus, making the storage volume very small. The only way I could make the top hollow has to slightly cut it…
CORE ONE / MK4/MK4S Nextruder Visualizer adaptor; one modified part, one new part and some other trinkets. PG Case was modified; added center hole. Added shaft to engage on the screws between the planetary gears; made for 8mm dia x 2.5 mm…
PrusaXL, Pi4 case mounting clips. Place your Pi somewhere you can see it! The two clips are identical and they are made for Malolo's screw-less Pi4 case with hex dome cover. Inset the clips horizontally in the extrusion slot and then…
Covers Side-Box and Side-Kick-Box option. https://www.prusaprinters.org/prints/122767-sidebox-sidekick https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right
Bed_Y-Tilt Compensator for Z-Axis for MK3S/S+ I made this because my bed had an inherent tilt around the Y axis and even with my bed leveling in place I wanted something to correct it. The Z calibration upper reference points are the…
Sink Scratch Protector Made for IKEA sink model: LÅNGUDDEN 2b dual mnt snk 75x53 stainless Need a different size, just let me know.
Hygrometer / Thermometer Bracket Tilted - 15 deg for even better visibility. Use to hold the hygrometer / thermometer on the Rubbermaid Cup
It all started with the Faiphone3+, then I needed to keep my Nokia6.1 alive 'cause the OLG lottery app wouldn't work on the Fairphone, then my kid wanted one for the Pixel3a. The stands will work with some phone sleeves. Although they are…
Ring to improve drape rings sliding. Two piece build in place. In theory it should work as the inner part rotates freely. I was not able to test it, as when I tried to install it I found that all the drape rings I have are welded. I need…
The MK4S Planetary Visualizer is made to work with the following model: https://www.printables.com/model/1141642-core-one-mk4mk4s-nextruder-visualizer-adaptor The Sun gear (center gear), require a 3mm thick / 6mm diameter magnet so it…
Olympic Rings Themed Button. Now I wish MMU2S had support for 6 colors.. :-)
PrusaXL Adjustable Idler Pressure with 3 step pressure adjust, without changing springs tension. Redesigned the clamping hinges and replaced the steel spacer with a dial, supporting 3 levels of adjustment. Three dials are available with…
Hedgehog shaped Bits Holder for 1/4" bits. Some may say it look more look Darth Wader!
PrusaXL Cable Parking Guide Update, 2024/03/12, longer arms/wider opening
Earbuds Buddy - Magnetic Earbuds Holder Two version included: exposed magnet and concealed magnet (need to pause the print and insert magnets). 6mm dia x 3mm thk magnets. Use at you own risk! :-)
Needed few changes to increase strength and retention Battery Clips for Toshiba Portégé R830 R1. My son knocked both of them out and only managed to find one of them. I measured it an modeled it strengthen it a bit, mirrored it and…
Broan, Light Cover, Range Hood. Fits 195 x 95 mm opening. I am not sure what the model the Range Hood is but it is old, 20+ years. Fits
PrusaXL Skinny Spool Bearing. Both options can support various spool width. Spool_Bearing_R4.3mf - print in place Spool_Bearing_R3.3mf - made to use proper bearings - recommended
PrusaXL Filament Sensor Frame for PC4-Mxx adapter Allows fitting a pneumatic adapter of you choice without any disassembly. Option 1 frame for PC4-M10; Best Option as the PTFE tube will reach the correct location inside the Filament…
Just a taller slightly thicker version of the original, with added buttons, because I wanted to use Flex filament. The button cutouts also help retaining the phone in the mount. Category: Mobile Phone
STOCK MMU3 - Filament # indicator! Bolt-on "cam-follower" design - flip in/out tag displaying the filament # in use. Onl y one part needs to be replaced! The 3mf file is made for MK4 with MMU3. For the shaft I used one of the aluminum…
Levelling leg for Thermaltake notebook cooler so it can be used as a router cooling pad. https://www.amazon.ca/gp/product/B00IGSATZY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
