Counting matching models…
Hello everyone! This is the Snapper, a 3D printed blaster shell that I designed to closely resemble the look and feel of the Nintendo Zapper. The Zapper is a classic toy blaster that I’ve always loved the look of, and over the years I’ve…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
Hello! This is a cupcake shaped container I designed that has two separate spaces for storage: A space in the wrapper and a space in the frosting. The Sprinkles, Frosting, and Wrapper pieces can all be printed without support, and only a…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
Hello everyone! This is an angled picatinny foregrip inspired by the foregrip on the Nerf Pro Torrent. I designed this for use with GP3D's beautiful Pump Kit for the Nerf Pro Torrent, but it should work on any standard picatinny rail. I…
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
This is a Maverick N-Strike Barrel Attachment Muzzle, which, once installed, allows N-Strike Style barrels to be attached to the Maverick. It replaces the existing muzzle, which can be removed after the blaster is taken apart. This muzzle…
This is a Slide Replacement and Stock Attachment Point for the Nerf Maverick. It uses the 3 small screws as well as the N-Strike Attachment nub and spring from the stock slide of the Nerf Maverick. It features a N-Strike compatible rail…
Hello everyone! This is a kit for the X-Shot Excel Ejector Shell Blaster that allows the blaster to feed darts from a Talon Magazine. When I saw photos of this blaster before it was available, this is the modification I knew I wanted to…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Storm Trooper stock. I always liked the look of the stock, but I was a little disappointed when I learned that the Storm Trooper…
Hello everyone! This is an angled picatinny hand rest I designed for fun. I didn't design it with any particular blaster in mind, but I quite like how it both looks and feels on the front of the X-SHOT Pro Fury-X. I used Captain Slug's…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to closely resemble the Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
Hello everyone! This is a 3D printed stock for the Nerf Pro Torrent that I have designed to extend the length of the standard Torrent stock. I liked the look of the original stock, but I wasn’t pleased with the length, so I thought it…
Hello everyone! This is an angled picatinny hand rest I designed for fun. I didn't design it with any particular blaster in mind, but I quite like how it both looks and feels on the front of the X-SHOT Pro Fury-X. I used Captain Slug's…
Hello everyone! This is a 3D printed stock for the Nerf Pro Torrent that I have designed to extend the length of the standard Torrent stock. I liked the look of the original stock, but I wasn’t pleased with the length, so I thought it…
These are my 2 versions of the Nerf Rival Takedown Grip by haphazardlynamed ( https://www.thingiverse.com/thing:4418085 ). One version has only the grip, while the other version includes a stock attachment point that is compatible with…
Hello everyone! This is a version of my Medium Length Nerf Torrent stock that is compatible with buffer tubes. Beneto contacted me and asked if there was a version of any of my Torrent stocks that was compatible with buffer tubes, and at…
Hello everyone! This is my remix of GP3D's beautiful Nerf Pro Torrent Pump Kit that allows it to be used with a Classic Epicxxx Rev 2 EX BCAR as well as with my 3D printed Torrent Stocks . I absolutely love GP3D’s aesthetic stylings, so…
Hello Everyone! This is my replacement grip for the Nerf Rival Saturn XX-1000. It features an upright pistol grip as well as a standard Nerf stock attachment point. There are several replacement grips that are available for the Saturn…
Hello Everyone! This is the “Super Socore 50”, an HPA blaster I designed that is Talon magazine compatible and powered by a Supercore. All of the other Supercore powered blasters I have seen are designed for practicality in a competitive…
Hello Everyone! This is my replacement grip for the Nexus Pro. It is a bit larger than the stock grip, both in width and the distance from the trigger. It uses the same screws as the stock grip, and can be swapped with the stock grip…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to resemble a shortened Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Super Soaker Shot Blast stock. After finishing the Raider-style stock, it just didn’t seem right to not also do the Shot Blast stock.…
Hello! This is an ice cream bar shaped container that I designed with the intention that every part could be printed without support and be easy to assemble. The two bottom pieces are snapped onto the stick piece to form the “lid" of the…
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Hello everyone! This is a modified endcap for the Rush by shoeless historian that adds a buffer tube directly to the blaster. I absolutely love the look of the Rush, and when I was planning my build out I decided I wanted to be able to…
Hello everyone! This is a Nerf Rayven that I converted from a flywheeler into a plunger tube and spring powered blaster. Back in 2011 when I saw a very grainy leaked picture of the Rayven on NerfModsandReviews, I got so excited by the…
Hello everyone! This is a remixed version of Captain Slug's Picatinny Angled Foregrip that doesn't require any additional hardware to use. I like the no hardware system I developed for my Torrent Inspired Angled Foregrip , so I figured it…
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Hello! This is a popsicle shaped container that I designed with the intention that every part could be printed without support and be easy to assemble. The two bottom pieces are snapped onto the stick piece to form the “lid" of the…
Hello everyone! This is a 3D printed replacement foregrip that includes a picatinny rail that is designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little…
Hello everyone! This is a toy scope that I designed to closely resemble the Nerf Longshot scope. I love the look of the Longshot scope, and I thought it would be fun to be able to print one in whatever colors I wanted. Additionally, once…
Hello everyone! This is a four dart capacity short dart/talon style magazine designed to work specifically with my Springer Rayven blaster. One of the main goals of the springer Rayven project was to keep the Rayven looking as original as…
Hello! This is an slice of cake shaped container that I designed with the intention that every part would be easy to print and assemble. There are two different versions of the model: one with the decorations attached to the Body and Lid…
Hello everyone! This is the Bakeblade, a cupcake themed top meant for battling or for just having fun! I saw that Printables was doing a battle top contest, which got me thinking about the Cupcake Shaped Two Compartment Container I made…
Hello everyone! This is a 3D printed stocks for the Nerf Pro Torrent that I have designed to closely resemble the look and feel of the standard stock. I liked the look of the original stock, but I wanted to be able to have more…
Hello everyone! Someone requested that I upload the stand that I used in the photos for my Ice Cream Bar Shaped Container and Popsicle Shaped Container , so here it is! Along with additional versions that can hold three and two…
Hello Everyone! This is a picatinny stock point made for the X-Shot Break Barrel/Spinshot. After getting my hands on this blaster and seeing that the area in the shell for the hammer looked like it was larger than it needed to be, I…
--The models include 2 different mag wells, one that can accept only katana mags, and one that can accept both katana and talon mags. However, I do not own any talon mags yet, so the mag release is only in the correct position for Katana…
Hello everyone! These are some alternative reticle options designed to work with the scope that comes packaged with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and while I like the scope reticle…
Hello everyone! These are three different sizes of 3D printed magazines for use with Buzz Bee shells. Back when I was working on my Buzz Bee Torrent parts, I discovered that the legendary Daniel Beaver had designed some printable Buzz Bee…
Hello everyone! This is a Bionicle style head piece with Lego compatible stud connections where the eye stalks normally go. A good while back I commissioned a Mata style head CAD model from KingSidorak so that I could play around with it,…
This is a replacement grip I made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. Now, having only…
This is a replacement pump grip I made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. Now, having…
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Hello everyone! Bionicle was one of my favorite toy lines growing up, as is the case with many people my age, with the Bionicle masks being my favorite part. For many years I've loved seeing the masks that talented designers like Rothanak…
This is a modification part I’ve made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. I decided I…
Hello everyone! In 1999 Hasbro Interactive released a light gun shooter game titled “Nerf Jr. Foam Blaster: Attack of the Kleptons”. Included with the game was a light gun that was similarly styled to the Nerf blasters that came out…
Hello everyone! This is a 3D printable magazine design for the Lanard Shell Shock X-6. I’ve always loved this blaster for its look, its function, and for the surprising amount of color combinations this blaster has been released in (any…
Hello everyone! This is a 3D printed picatinny rail mount piece for the Nerf Strikefire/Crossfire. I recently purchased this well loved red Crossfire that had a partially messed up rail attachment piece at the top, and I figured it would…
While testing my printable Buzz Bee Magazines with a Rapid Fire Tek, I decided the blaster would look cool with a sight on the top, so I designed a Nerf N-Strike rail that clips on to the top of the blaster. I then made a version that has…
The Mattel Maximizer is well known for at least 2 things: being quite powerful, and often breaking in one or several places. Since the Maximizer came out people have been attempting to keep these blasters functional by reproducing broken…
Hello Everyone! This is a part that allows the stock from an X-Shot MPP to be used on a standard picatinny rail stock point. I decided to print out an alternate stock for my MPP, so the collapsible stock the blaster came with was just…
This is a printable version of the magazine used by the Light Storm LS1. It holds 5 darts, and feeds just as smoothly as the original magazine does. This project requires the following hardware to be assembled: 1 constant force spring,…
Hello everyone! This is a replacement barrel for the Nerf Strikefire/Crossfire that features a two dart inline clip. I recently purchased this well loved red Crossfire, and I figured it would be a fun candidate to make some quick and easy…
Hello everyone! This is a Bionicle mask inspired by this piece of concept art from a promotional image for G2 . I really like the look of this art, and on a couple occasions I've tried to make a model of it, but none of them looked…
Hello Everyone! This is a replacement 3D printed sight for the Koosh Vortex Tornado. The Tornado is famous for many things in the Nerf hobby, one of which is that the blaster's yellow sight is notoriously easy to remove. Naturally, used…
Hello everyone! These are some 3D printable barrel options for the Nerf Ratchet Blaster that allow the blaster to use a few different ammo types. This blaster was quite broken when I acquired it, but that made it the perfect modification…
Hello everyone! This is a modified Bionicle Metru style head piece with Lego compatible stud connections for eyes. I had a ton of fun making my Bionicle Compatible Head with Stud Connections , so I thought it would be fun to modify a…
Hello everyone! This is a Bionicle Metru style head piece that has been optimized for 3D printing. I wanted a CAD model of a Metru head piece to mess around with, so I used this mesh I found online uploaded by thall72 as a reference to…
These are all currently available results.
