Counting matching models…
The DrawBot is similar to the commercially available AxiDraw. It is powered by an Arduino Uno controller, uses a CNC Shield, and GRBL firmware. The approximate cost to build the DrawBot is $100. Recently some makers of the Drawing Robot…
Lost in the wilderness? A few feet of paracord for making a bow drill fire set or for a thread to fish with might save you. This bracelet gives you 7 feet of paracord right on your wrist. Both styles of buckle are remixes of designs used…
Thumb screw caps are an easy way to turn a 3 mm, 4 mm, or 5 mm hex socket screw into a thumbscrew. They press fit onto the head of the screw and make the screw easy to remove by hand. They are great for adjustable or removable assemblies.…
I resized the original design to be 1:48 scale so that 3.5" is equal to a 14 foot high street lamp. This size matches the Dept. 56 Snow Village houses. I increased the size of the hole through the middle so that wires could be fed…
This Ryobi 18V Battery Connector allows you to power any device or power tool with Ryobi 18V Batteries. This connector can be used as the basis of an adapter to power non Ryobi power tools or to power your electronic projects with Ryobi…
Customized version of http://www.thingiverse.com/thing:1264391 This Arduino Uno + CNC Shield enclosure is for my Drawing Robot https://www.thingiverse.com/thing:2349232 This is a work in progress. Print Settings Printer: HyperCube…
I wasn't able to find slot covers for 2020 extrusions with 6 mm wide slots so I printed these. They work well with 6 mm or 6.2 mm slots and you can scale them a bit if they are too tight or you want them longer or shorter than the 200 mm…
I used this original design to design my handle: https://www.thingiverse.com/thing:299982 I changed the handle to use two 5mm x 25mm cap screws and I redesigned the base to be stronger and to receive a 5mm Nyloc nut. I needed the extra…
My remix: http://www.thingiverse.com/thing:1614456 I removed the extra slots for a flat belt and added a slot for the paracord. Both parts are printed laying down. Print the female part with internal supports. PLA extruder 210C bed 60C…
I made this Egyptian crown for a Halloween Pharaoh costume. It is made up of links that snap together so it is easy to print and easy to make crowns for different size heads. It includes an optional Cobra headpiece which can be glued to…
These silhouettes are for making Glow Jars or Glow Lanterns. They are printed and then attached to the inside of a glass jar. Once printed, these silhouettes are flat. To glue them to the inside of a jar, I suggest gently warming them…
These are circle drawing templates. I made them because they contain surprisingly large circles for such a small template (2" and 50mm) and they are very compact. Have you ever used a jar lid to draw a larger circle? One template is SAE…
I'm building a Reverse Geo Cache Box which opens when carried to a specific latitude and longitude. For the box to open, it must have a servo operated latch. This is my design for a servo operated latch. It uses a MG90 servo but a SG90…
Lost? Need to make a lot of noise? Need some cord or fishing line? This survival whistle combines a repaired "Better Whistle" with 5 feet of parachute cord which is woven into a key fob using a 24 mm split ring and the whistle eyelet. The…
Customized version of http://www.thingiverse.com/thing:1264391 This enclosure is for mounting an Arduino Uno + CNC Shield on the 2020 DrawBot or any other 2020 extrusion based machine. There are two tabs with 5 mm holes for screws to…
These corner blocks turn an ordinary ratcheting tie down strap into a four corner band clamp. They are used to clamp boxes while gluing them together. The blocks are designed for 1" wide straps such as these from Amazon .com:…
I had a piece of glass custom cut for my 270 mm x 220 mm heated bed. I used the typical paper clip attachment but wanted something less intrusive. These small clamps will hold the corners of a glass bed to a bed substrate such as…
This Ryobi 18V Battery Connector allows you to power any device or power tool with Ryobi 18V Batteries. This connector can be used as the basis of an adapter to power non Ryobi power tools or to power your electronic projects with Ryobi…
I recently installed an attic pull down ladder which came with a small cheap handle to pull the ladder down. I designed this beefier pull handle. The rope for the ladder feeds through the middle of the handle and is tied into a knot which…
I ran out of dividers for my Plano parts organizer (also for tackle) and designed this divider. Its printed in PLA and fits tightly in the slots of the organizer. It fits the Plano 3700 line of boxes. I use my Plano 3700 boxes to store…
There are plenty of printer tests but I happen to like this one which is easy and quick to print. It is an 80 mm X 80 mm square frame which is 2 mm high and 2 mm thick. This test allows you to do a quick check of scaling in the X and Y…
This bracket is used to mount a power supply to a printer base. My power supply is a MeanWell brand but I believe that the mounting holes are the same on these style of power supplies. Four of these brackets provide an easy way to mount…
Treasure Quest is a Pirate Treasure Game. The chest contains electronics with a GPS module that guides you through a series of clues and destinations. After the final clue is solved and the destination reached, the box magically opens up…
This is a remix of thing 1812257. I added caps. One is blank and the other has a name on it. To see how to add your name, check out my thing here: http://www.thingiverse.com/thing:2294134 Create the name and then add it as an inset on the…
These chair feet are designed to fit chairs legs that are made with 16 mm inside diameter square tubing. I've included three styles of feet. The foot with the rounded end will fit a leg at any angle. Each of the feet has a round recess…
I posted this as remix because "makes" don't allow you to add files. I created an installation and use manual which is helpful for using this DrawBot. It explains how to install the Inkscape software and extension and how to use the…
Just a cool bracelet. 100% print size = 65 mm inside diameter 78 mm outside diameter Print with supports for the holes. Category: Bracelets
This address roll dispenser is used with commonly available address rolls. The dispenser used to come with the address labels but I didn't receive one with my last order. The lid fits on with a friction fit. If it is a little tight, some…
This is a housing for SS40 or SS41 type Hall Effect Position Sensors. It will also work with other sensors using the same package style. These sensors use a small transistor like package that is difficult to mount. This housing allows the…
This wall mounted bracket is for an AT&T BGW320 Fiber Modem. It allows you to mount your modem on the wall securely. It includes the mount shelf with retaining tabs, a top clip, and an optional power supply mount which clips to the…
Originally I had my extruder cable bundle tied to the frame using a large wire tie. This clamp is neater and holds the cable in place better. This clamp can be used for any cable needing to be attached to an aluminum extrusion. The cradle…
This object is a refrigerator magnet that looks like a large push pin. It uses a 0.375" dia. X 0.125" thick magnet that fits into a pocket. The object should be printed with support inside the magnet pocket. The magnet should fit snugly…
I just bought a Bambu Lab X1C printer and part of the maintenance is to grease the three vertical threaded rods with a special grease. You can do it with your fingers but this tool makes the job easier and neater. This tool can be used…
I had problems with moisture getting into my filament and causing little pops on the side of my prints. I realized when the problem did not occur with a fresh spool of filament that my filament was absorbing moisture. This Airtight…
I made this handle to make it easier to pickup my HyperCube Printer (CoreXY). The handle is narrower than commercial units that look similar so it fits on 2020 aluminum extrusions. The two mounting holes allow 5 mm screws and a 2020…
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if…
This part is a remix of the referenced part. I made it longer to accept a 3" valance slat. Original design #2460178 Category: Replacement Parts
My friends and I like to play the card game Rook. For 2017 we selected the best player and I created this trophy. You can use this design to create your own trophy by cutting off the Rook bird and putting your own object in its place.…
Easy to print rack for bar clamps. Strong and easy to mount. I printed mine in ABS but PETG or even PLA should work since the surfaces are thick. I used 50% infill with 5 perimeters for strength. Category: Tool Holders & Boxes
This thing shows how to make retro and other style font name plates Enter the text by typing it into the following web site: https://www.fonts.com/font/urw/frigidaire/regular (or other font) This technique will also work with other fonts…
Remember when you bought your 3D Printer and were promised that you could print repair parts for things around the house. Admit it; you have been printing whistles and action figures and your 3D printer is collecting dust. Here's your…
Accessories for using a gyroscope. The pull tab should be tied to a strong but thin nylon cord. The stand provides a place to demonstrate the principles of a gyroscope. Here's a good website that explains:…
This Thing contains the configuration files for Simplify 3D users who want to use it with their HyperCube or CoreXY printers. I was forced to have at least one STL file so I found a little frog like the one S3D uses for their website.…
This thing is the HyperCube stock X carriage modified to accept either the LM10UU linear bearings or the Igus RJ4JP-01-10 10mm bearings. These bearings both have a dimension of 19 mm x 29 mm. This modified carriage will accept one bearing…
This Thing is a wall holder for the remote Control for EtekCity or BN-Link Control Outlet. I use these modules to turn my garage lights on and off. This holder provides a wall mount for the remote…
This panel mount allows Plexiglas panels or other panel materials to be mounted within 2020 aluminum extrusion frames. I used them to add a panel to the bottom of my HyperCube printer. The mounts provide the advantage of placing the…
This CNC Router vacuum adapter holds a Craftsman Car Nozzle in position to pick up debri from your CNC Router. It mounts using glue or double sided tape to the barrel clamp that hold the router motor. It could probably be used on other…
I took the Ryobi Battery connector and removed the ears so it could be glued into the opening in the side of my Sony portable radio. The radio is more or less hollow in the end allowing room for the battery and a DC-DC converter (set for…
This knob is for my 6040 CNC. I used the source design and made the nut hole a little bit bigger. Thanks to the source designer Selphb. The knob matches my other knobs. THIS IS A REMIX. I entered it as a remix but because Thingiverse is…
This Thing documents the MachTach machine tachometer which was a product I used to sell. I have stopped selling MachTach kits so I am now making the design open source so that people can make their own tachometers. Please read the…
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if…
This is a replacement yoke for the head of an O Cedar Floor Mop. My yoke which connects the handle to the head broke. This part is a snap in replacement. https://www.amazon.com/Cedar-Hardwood-Microfiber-Telescoping-Handle/dp/B06XWJV9PN…
There are quite of few remixes of the HyperCube XY Joiner but I couldn't find one with the following features: Dual LM8UU Bearings (also IGUS RJUM-01-08 Bearings 2-3-2018) 8 mm X axis, 8 mm bearing Y axis Toothed Pulley mounts Integrated…
I bought motors to motorize my Bali Roller Shades. The kit with remote control is available on Amazon .com. They make it easy to remote control roller shades. The only problem was that the motor mount and drive sprocket were for a 38 mm…
I just got a new Grizzly G1023R Tablesaw. It's a beautiful machine. I noticed that they left the ends of the saw fence rails open. I decided to design plastic filler plugs for the fence rail. It looks nicer and it protects the fence rail…
This cap is used to create a laser diffraction pattern. Print it and then stretch a thin material across the end. Use glue to retain the line. Fit the cap on the end of a laser pointer and point it at a screen such as a white wall. The…
I bought the following pull out trashcan retainer. It works great except the trashcans are not held firmly in place so they move around when you open the cabinet. Rev-A-Shelf - 53WC-1835SCDM-212 Pull-Out Waste Container with Soft-Close…
This Thing shows how to make a Cricut Paper Cutting Machine George Cartridge. The George Cartridge is is the basic cartridge that most Cricut Paper Cutting machines come with. Sometimes people lose the cartridge making the machine…
Have you ever worried about leaving your printer running for those long 20 hour prints? With a heated bed, hot extruder, and cheap power supply, there's a lot that could go wrong. I have worried about leaving my printer unattended and…
This movable hinged bracket allows the LCD display to be mounted on a vertical 2020 extrusion. The display may lay flat within the frame or be moved out at up to a 90 degree angle. The joint is strong and easy to move. It uses a 35 mm x 6…
These are medallions for the upcoming Super Bowl LII (52). The one design with the eyelet can be hung on a ribbon or string and given as prizes for each touchdown a team makes and the other design has a curved back so that it can be…
This CPAP adapter goes between the normal CPAP hose and mask. I printed this so that I would have an extra adapter. Category: Replacement Parts
This is a sliding mount for the auto bed leveling sensor type SN04-N used on some Prusa i3 3D printers. This sliding mount is much easier to adjust than fixed mounts and is easy to make from commonly available screws. This mount can be…
Lens cover for my Gesma Webcam. I believe this same webcam is made under other names so it may fit your webcam. The lens is 20mm in diameter. This cap is 9.5mm deep and should be printed open side up which requires no support. My webcam…
I just bought a new Grizzly G0899 table saw which I love except for one thing. The rip fence distance indicator uses a magnifying bubble with a line that is a good 1/4 inch (6mm) away from the scale attached to the fence support bar. It…
This is a design for a gumball coin mechanism used for a greeting card. The gumball machine is cut from cardboard and clear plastic. The simulated coin mechanism makes for a realistic gumball machine with twist handle and flap door.…
Instead of printing the leg as a flat cross and then bending the legs for this robot, I did a remix where the leg can be printed in two pieces and glued together using Super Glue. The joint in the middle can face one of two ways which…
This tool provides a quick way to level your HyperCube bed. I know, auto bed leveling will take care of everything except that I don't like it. Auto bed leveling moves the Z axis up and down as it moves across the bed which I think is…
I remixed the original Z axis carriage to add longer arms and an additional set of holes. I also opened up the bearing location by 0.1 mm. Clamps and Bearing Rod Supports are the same as the original design but presented here for…
I recently was invited to a Oktoberfest Celebration where it was requested that we wear traditional German garb. I bought a pair of Lederhosen which were very nice but I wanted to dress them up a bit. I designed and printed this medallion…
This Thing is an Ultimaker Robot which I scaled up to 200 mm tall by 220 mm wide. I printed him in halves so that the parts could be bucks for a vacuum forming machine. The photos show the robot halves together and then on the vacuum…
I was running my printer on a piece of carpet to isolate vibration. I've been looking for a more permanent solution and saw that some people have used tennis balls with attachment mounts. I wanted something smaller and found these foam…
I decided to add LED lighting to my completed HyperCube but I wanted it to be neat and non-intrusive. The LED Strip aluminum extrusion I chose included the diffuser, end caps, and mounting brackets. The end caps could have been used but…
This is a remix of https://www.thingiverse.com/thing:3817554 I narrowed the case and removed the sides. I also broke it into 3 parts which are glued together using Super Glue. This makes it easier to print. there are two end caps and one…
I just bought a CNC 6040 Router. I assembled it and its working great but I noticed that the housing between the frame and stepper motor has an open access hole where sawdust or other debris can collect. This cover snaps into place to…
This is a remix of the original V1.2 fan duct with thicker walls. My original fan duct had a small amount of buzzing noise. Maybe I printed it poorly. This duct is a bit stronger and less prone to vibration. I printed this part in ABS at…
I just got a CNC 6040 Router/Mill and was looking for a workbench for it that is strong, mobile, and not too big. This bench was nearly perfect except that I wanted the work surface to be 40" from the ground. I bought the bench, which is…
I built a tree house with a Pirate's Ship theme. It has a ship's wheel with a bolt holding it on. I wanted to attractively cover the bolt so I designed this cap with a Pirate coin as the face and the Initials*DMTNT! as a banner around the…
My house has some of the old style narrow wooden shutters. The wooden pin which the shutter slats pivot on can easily break leaving the shutter slats laying crooked. This design creates a replacement pin with a flat piece of plastic to…
Customized version of https://www.thingiverse.com/thing:468917 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=468917 I created this custom enclosure for this Laser Proximity Detector.…
I made the original mount a little taller and the ring a little thicker. Category: 3D Printer Parts
This knob is part of an adjustable dado jig. It provides the clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. The nut is pressed into the cavity. It should be tight as is but can be glued…
I upgraded my HyperCube Z axis to 10 mm bearing rods and decided to add a Z Axis limit switch. The stock mount is for the 8 mm bearing rods and requires that the mount slide over the bearing rod. This mount can be attached after the rods…
This housing retains a MachTach Gear Tooth Sensor and cable making it easy to mount the sensor on your machine tool. This sensor allows the MachTach to measure the speed of a machine by monitoring a gear with up to 90 teeth. The MachTach…
I like using solar lamps in my yard but the plastic stakes will not consistently hold the lamp vertical. This thing is a replacement for the flimsy stakes provided with solar garden lights. This things uses a 12" x3/8" diameter spike to…
I liked QuickBike's design for a HyperCube bed frame alignment bracket. He made it easy for me to add my retro name by supplying a blank bracket. I added the previously created "HyperCube" retro name and spun a new STL file. I printed…
My HicTop Prusa i3 3D Printer originally had an MKS Base V1.3 Controller (also works with V1.4 and V1.5). I replaced it with an MKS Gen V1.3 Controller and discovered that the mounting holes are different. This mounting bracket allows you…
Lens cover for my Gesma Webcam. I believe this same webcam is made under other names so it may fit your webcam. The lens is 20mm in diameter. This cap is 9.5mm deep and should be printed open side up which requires no support. My webcam…
I wanted to make my outside lights turn on at dusk and off at dawn so I added a photosensor. I ended up with a problem where the light coming on and dusk would cast light on the sensor causing it to go back off. This cycle would continue…
My city has started requiring that each household deposit organic waste from our home into the yard waste bin. In my kitchen I have a garbage and recycle bin but now needed a small organic waste bin. I bought a small leftover container…
I have been building machines such as 3D printers and drawing robots that need a cable of wires supported while being routed out to a moving assembly. I use 24" nylon wire ties as a support to the cable bundle. This Thing is an end mount…
This housing retains a MachTach Gear Tooth Sensor and cable making it easy to mount the sensor on your machine tool. This sensor allows the MachTach to measure the speed of a machine by monitoring a gear with up to 90 teeth. The MachTach…
I needed to add a new Trex Post to my deck but the Trex Bases available did not match my current bases. My posts were also slightly taller which meant I needd an extension for the post. I designed and 3D printed both parts in white PETG.…
This is a 3D Printer controller adapter for MKS Base to MKS Gen controller. I bought the MKS Gen V1.3 Controller and didn't realize that it has a different mounting holes than the MKS Base controllers. This adapter allows you to mount the…
This Thing is a caster set that attaches to the frame of the DeWalt DWX726 miter saw stand. As delivered this stand requires that you fold it up to easily move the saw. If you want to move the saw with the stand opened, you must drag it…
This is a design for a panel mount enclosure for the Half Size MachTach machine tachometer https://www.thingiverse.com/thing:3352007 This panel mount allows the MachTach to be neatly flush mounted in a rectangular opening of 40 mm X 100…
My city has started requiring that each household deposit organic waste from our home into the yard waste bin. In my kitchen I have a garbage and recycle bin but now needed a small organic waste bin. I bought a small leftover container…
These are all currently available results.
