Counting matching models…
Gen3 Compatibility (update: Oct 20, 2025) Working with @JoshuaFowler_3228464, I was able to add support for Gen3 spools. Gen2 Compatibility It sounds like there's some Sunlu spools that this doesn't work with. The most recent Sunlu spool…
BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
Inspired by @Mimo47_326620's Closet rod holder for hanger . I've already made a 1-5/16" 3mf and there are STEP files (should work in OrcaSlicer, Prusa Slicer, Bambu Studio) for 1" 1-1/16" 1-5/16" 1 1/2" 16mm 20mm This lets you hang a…
I've also designed an 8-drive version that uses a backplane. This drive rack holds seven standard SATA drives in a way that they are hot-swapable. It takes up 3U on a 10" mini rack (I used the GeeekPi one). The main body takes a while to…
UPDATE 2026-04-06: I made a new version here: Use this yarn cake holder to keep your yarn from rolling away as you knit or crochet. Parts I used these “detachable swivel clasps” to connect the spinner to both the lanyard and to the base.…
BOM Part # Photo M2x10 or M2x12 screws, self-tapping, countersunk src 1 src 2 src 3 , assorted src 4 , assorted 4 USB-C PD Trigger Board with DIP Switches amazon.com src 1 , verified src 2 src 3 src 4 aliexpress.us src 1 src 2 src 3 1…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones. The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to…
This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm across. A printer with 250mm print area…
General This is a funnel and stand for the Bialetti Moka Pot. Provided are STLs and OpenSCAD files. Funnel The funnel STL is for the 6 cup moka pot but if the smaller pots have smaller inside diameters, I could easily add them if someone…
I designed these organizers to make parts available while I'm working on a project, and to provide a secure option for stashing parts when I'm working on a different project. These organizers stack on top of each other and feature a latch…
I really liked YoxxxoY's design but I wanted to be able to wall-mount it. I tweaked it a bit more to make it not require supports in the larger holes as long as your printer can handle <60°. Print on the side without the groves. I've…
This is a handle that you can attach to the inside bottom panel of your Voron Trident when you do the Inverted Electronics mod. Installation Use VHB tape to stick this to your panel. It's short enough that it will sit below the bed plate,…
This niddy noddy is designed with a full wrap being 5ft or around 1.5m. Use this to collect yarn up into an untwisted hank before twisting it. Useful for post-processing after dying yarn. NOTE: make sure you use the correct cross bar on…
These are a few floral Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker), a heat erased pen (eg Pilot Frixion), or a wax marking pen (eg Clover Water Soluble Pencils) to mark…
This is a hole cutting jig for use with a top-following router bit. It has an embossed indication of the size of the hole. I found that 1" in probably the smallest setting you'd want to use for hole_offset_in setting. Any smaller and you…
CAD on onshape I designed a pleasing pen holder / desktop organizer that's pretty easy to print. No supports needed. I printed mine with 3 wall loops and 10% infill.
Use these as a base for a jig for your xTool F1 laser cutter/engraver or the Slide Extension for your F1. Either make a jig in your slicer, import the STEP file into your CAD program of choice, or create a fork of my design in OnShape!…
Deprecated. Use Instead: /model/527627 This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm…
This model should print fine with whatever default settings you have. No supports needed. The lid is set up with ~0.2mm clearance so most printers should be fine with this. If you run into tightness problems, try either sanding the edges…
This is a spacer you can use if the screws on your knife are too long for the 3d printed scales that this was remixed from. I'm not totally sure if the negative and positive volumes I added will apply correctly unless you open it in…
Hardware 4x M3x8 4x M3 Roll-in nuts or M3 hammer-head t nuts 2x M3x5 2x M3 Heatset Inserts (voron style) Diffuser Thickness The pictures show the 1.4mm diffuser and LEDs running at colors set at 10% brightness. Print samples of each (the…
This model pairs with Cliftoce's Voron Trident Horizontal Umbilical Chain . It runs much quieter than stock, at around 38dB. BOM For fastner sourcing, I've found the following to be good places: AliExpress – slow delivery ~2 weeks…
I redesigned my yarn cake spinner since my wife found my old version to be a bit tipsy when she was using it on uneven surfaces such as on our bed. This new one is standalone and doesn't require a hanger base like the old one does. It's a…
This case was designed to store the sashiko templates I designed but it should work for a lot of commercial designs as well. Use tree supports to support the closure catches. Use a hair tie over the catches to keep the templates inside!…
General This filament spool holder will sit on top of your printer so that it has a smaller footprint. This includes optionally relocating the filament runout sensor to the top of the printer for a shorter filament path. You may need a…
¼" drive socket for Cardboard Construction Tools Set's screws. You can use this with a ¼" ratchet, or if you have a ¼" to hex adapter you could use it with a cordless drill or an electric screwdriver like the Bosch Go or Dremel HSES-01 .…
Do you use a minifig for your token in Pathfinder or D&D? This case and baseplate will make transporting your minifig easy and safe! This should not require supports to print. Use the text or SVG tool to add flair to your case. You can…
This is a configurable thumbnut design. The default parameters are set up for a square M3 nut. This can be configured to fit any size of square nut. When you're slicing the stl, make sure to set it up to pause at the end of the very last…
This is a vise mount for the OpenScan so that it can forcefully grip relatively flat but heavy things (in the photos, I show it gripping a metal Singer 503 front face plate). I used the following hardware: External Hex Head M3x30mm…
This is a front door cover for the 8-drive 10" mini rack case I designed . Assembly Screw 2 of M3x25 bolts into the tops of the door to serve as hinges. Mount the handle with 2 of M3x15 bolts. Use whatever M5 bolts your case uses to mount…
Use these tools to add seam allowance to your sewing pattern: either increase the existing seam allowance or add more seam allowance. Sizes Available is both a set of metric and imperial tools. Metric tools range from 5mm to 25mm in 5mm…
Added the Pine64 logo to iterate's 4-tip remix of PjotrStrog's Pinecil/TS100/TS80 case . I've also included a copy of the logo cutting tool I made for cutting the case. Use 3D Builder to cut the bits in the logo cutting tool from whatever…
These screw mounts can be glued to the OpenScan Classic Pi Base Slider in order to screw the slider to a fixed surface. The holes are M3 and the nut opening will fit a square M3 nut or probably a hex M3 nut. I used superglue + activator…
General Use this to store thread spools on your Wall Control pegboard. There are two versions of this model: Tilt arrester on both sides - I prefer this one. It requires assembly but that's just sticking the little peg in on the back side…
Inspired by this reddit post , I made a printable version. To print in two colors, when slicing in Cura, go to Extensions → Post Processing → Modify G-Code → Add a script → Pause at height . Start by printing with white filament and then,…
Use this to adapt your Slant-Shank Singer sewing machine to use a modern clip-on / snap-on presser foot. Printing Print with the flat side on the bed. Use ~10 wall loops. I'd recommend using PETG but PLA or ABS/ASA might work as well but…
If you're willing to strip the plastic housing off of your NexiGo N980P, you can use this model to mount the PCB in either the front left or right top corner of your printer (or, the back is probably ok too). Use two of the zip ties from…
I created bases so that the origional models could be used as 50mm and 75mm tokens. This way you don't have to reprint all the tokens scaled up, you can just pop the token you want into the larger base.
Hang your Yamaha Tenor Recorder (yrt304b) from the wall! You can mount this with either command tabs or a screw and drywall anchor. The cantilever part is optional, but recommended if you're using command tabs. Just slide it into the…
This model provides a cap for a 1/4-20 monopod and a clip for its shaft in order to hold a flag. No supports should be needed and it should be able to print with your default settings. Use a 20mm M4 bolt through the rivet of your flag to…
I created this system so that I could easily swap out metal photo prints on my wall. I wanted to be able to change photo sizes without the center of the photo moving. The idea with this system is that you pick the smallest size photo you…
BOM Hardware Printed Parts BC660 4x M3 Heatset Inserts 2x M3x12mm 2x M3x8mm (can sub x12mm) Optional, if using rear retainer 2x M3x8mm (can sub up to x12mm) Note : SHCS or BHCS will both work. BHCS is nicer for the rear retainer Plate…
Print Settings If you'd like to remix this, the CAD is available on OnShape . Bungee Retainer PETG, ABS, or ASA are probably ideal. You might be able to get away with PLA but I haven't tested it I printed this with 7 walls which makes it…
Use this shelf as a laptop stand, as a monitor stand, or to cover cables going between your computer and your keyboard / mouse. Use your slicer to put a name or something else on the nameplate in the center front! Uses 3x of M3x30 or…
BOM Item Quantity Src Plug-in hanging light kit 1 src1, verified src2, verified 6mm x 3mm cylindrical magnets 204 src1, verified src2, verified src3 Zip ties, small 2 src1, verified src2, verified Shade, upper 6 Your choice of assortment…
Components Boundless Voyage Telescopic Titanium Chopsticks (80mm long, ~7mm largest diameter) Keyring (ideally 1/2") Printing & Assembly This prints very straightforward. Print in TPU. No supports needed. I'd aim for 3-4 walls. Thread the…
Case for the DMT 70mm Whet Stone set with a cutout for holding one when in use for sharpening. This model is print-in-place and does not require any supports. Snap off the pre-support fins in the cutout and gently wiggle the two sides to…
The sheaths that come with the Morakniv straight knives is pretty terrible. You can replace the stock sheaths with these. Grab some waxed thread for leather sewing and some leather sewing needles and sew the three parts together with a…
Did you lose or break the disc that helps keep your thread spool on or guide the thread out? Print one of these to replace it. First try out the test sizes to find an option that fits the spool rod on your sewing machine, then print any…
I designed this clutch strap for a couple of my cameras. It's loosely inspired by the Peak Design clutch. I wanted to be able to leave the clutch on while still being able to tripod mount my camera, so I incorporated a 1/4"-20 hole pretty…
These are all currently available results.
![Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V2]](https://media.printables.com/media/prints/527627/images/4290070_cb6640df-ca40-4912-b6b8-ee13e6ff264c/2023-07-19-224844.jpg)
![[Deprecated] Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V1]](https://media.printables.com/media/prints/418149/images/3469358_e92082d3-d2b1-463b-ae22-3fd1580de5eb/spoolholder_twostacked.png)
