Counting matching models…
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Print approx. €7.35–€8.98 excl. taxPreliminary estimate for one variant
I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.
Print approx. €2.43–€2.98 excl. taxPreliminary estimate for one variant
I needed something that I could use to protect my miniature whilst traveling to, and from games. Most others I found were not the ideal size, or more complex, hence I made this. I've been using this myself for a few weeks, and have found…
A huge thanks to Karel, the original designer. I really enjoyed the original and use it a lot. For this version, I made a couple of small modifications to make it better accommodate shorter/smaller pipes too. Larger pipes also still fit…
I made this pipe to fit inside the lower cupboard of a mid-century smoking cabinet that I have. It works well with the pipes I have tested it with. I would be interested to hear how you find it. N.B. I was able to print with a good brim…
Stake- style planter labels, approximately 128 x 16mm. I designed these to print dual colour (set a filament change at 2.10mm), but would print well single colour too. I can't think of all the naming permutations, so feel free to adjust…
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Cone and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
I was given a wall-mounted bottle opener for Christmas. I got fed up with picking the caps up off the floor, and I didn't know what these were called to buy one, so I made it. Prints on most printers without support. I have provided a…
I wanted to store some tools in my bike shed. They needed to be compact, mount easily to the door, and be easy to remove and replace the tools. This is what I came up with. I made this to fit the Park Tool Pick Set (# UP-SET - Utility…
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cube templates are available too. 10ft, 15ft, 20ft, 30ft, &…
I printed a set of the BriteMini figures for my DM to use in our game. As a thank you, I decided to design this case for her to keep them in. I also opted to deboss her name in the lid, though the plain lid is provided here. The lid did…
N.B. Razors shown for demonstration Only I've grown a modest collection of razors and wanted a way to show/display the ones that I'm not actively using. Most commercially available options held to few razors, were too costly, or both.…
You don't need to be that precise when sowing your seeds, nonetheless, I like to be consistent with my sowing depth. The larger end of this dibber has 5mm increments. Push in to soil up to a line, the number visible above the line is your…
I made this a couple of years ago in the process of learning to use Fusion 360. Although the. detail turned ou to be a bit much for the flexible filament, it has performed admirably. I drop my phone, a lot, and somehow it's still alive. I…
I made this for my DM. I wanted something a little bit sturdier than one of the vase mode designs, and in a single piece, so that it was easier for her to transport. Circle and Cone templates are available too. 10ft, 15ft, 20ft, 30ft, &…
I wanted to store some tools in my bike shed. They needed to be compact, mount easily to the door, and be easy to remove and replace the tools. This is what I came up with. I made this to fit these sets, but would almost certainly work…
I loved this original design, and immediately thought it would be a great way to hold my tools, but it took a while to get the knowledge and skills to be able to modify it to fit, and to be properly printable. I built this to work with…
I've been building a Seiko Mod, needed to enlarge the centre hole, slipped and ruined a dial. I had seen people using a perforated base, made by the Swiss, and thought ‘that’d solve my problem'… …then I saw they charge £50+ for them, so I…
Yes, you can use pretty much anything to do this job, but I wanted to make it simple to judge the depth and space needed when potting up seedlings. 36mm at the top. I have included a taller version that makes it a little bit easier for…
I wanted a way to store and organise my paint brushes, stand alone and fit in a fairly tight space. This is my first attempt at designing anything (except something done with TinkerCad). I used perforations to reduce filament usage. It's…
Created for a friend who needed to fit an existing crudcatcher mudguard, to an over-sized (31.6mm, I believe) seat post. This was adjusted a couple of times to give a little more clearance. I thing PETG would probably be ideal for this,…
I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the rear on the chain stay, and…
I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the front on the main boom, and…
An organiser for your resistors. I wanted a way to keep resistors tidy, to hand, and easy know what resistor value you were grabbing. I did consider making it larger and spacing them out more, so that they were kept more separated, but…
One of my earliest TinkerCAD designs, so far from slick, but if it's useful, go ahead. My workbench is a mess! This makes it slightly better. I designed this specifically to hold the things that were frequently all over the place. The…
I've tried using normal plant labels, I find it tricky to write enough on. They're easily knocked out of position, etc. I wanted to make some labels that could be easily looped on and off with string, that were durable, and reusable. I…
N.B. Pens shown for demonstration Only I made this pen stand for my desk, to accommodate clips too as I like to have them nib-down whilst in use. It was inspired by my razor stand of similar design. I printed it in PLA, I've no doubt it…
I wanted to store some tools in my bike shed. They needed to be compact, mount easily to the door, and be easy to remove and replace the tools. This is what I came up with. I hope this helps. Please leave a like if it does, and post any…
Cover for the design: https://www.printables.com/model/595148-small-parts-tray-cabinet-box My version of the top tray: https://www.printables.com/model/1229752-top-shelf-for-small-parts-cabinet-with-recess-for Intentionally quite a tight…
These are all currently available results.
