Counting matching models…
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Just the single screw I designed because I needed it for this project: Lens Cap Holder Update (01-07-2020): Edited a new version to be printed lying on the print bed: Camera Screw V2 Update (19-04-2022): I uploaded some longer versions of…
A different version of my screw I designed for this project: Lens Cap Holder This is designed so that it can be printed lying on the print bed. I haven't tried it yet, but I hope it should be a bit stronger due to the direction of the…
Stick this with some double-sided tape under your kitchen cabinets and your Kitchen Aid accessorys have a resting place. Printed in TPU it will last the longest.
I am not sure if the name for this part is right... I searched quite a while for the correct translation. But at first I didn't even know the german word.... :D In german it is called "Abzweigbaldachin" so the direct translation should be…
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
I designed these to improve the grip and to keep the pencil from rolling. One in a triangular and the other in a more pencil like, hexagonal shape. Printed with flexible filament they fit quite good on the Apple Pencil. Update…
I designed this little box for my headphones. I was searching for a way to keep them safe inside my backpack, when I'm not using them. The box had to be reliable and easy to handle. At first I thought about using some kind of film hinge…
Inserted it makes a 10mm gap between the lower part of the machine and the original lid of the tray. Combined, it raises the cup 17 mm above the lower surface, allowing a standard IKEA cup to fit perfectly.
I designed this little buckle to make it easier to work with Therabands. You can adjust the length of your loops with it without using any knots. Just fold the Thera band a couple of times so that it fits into the buckle holes and wind it…
I liked the original design because of its clean surfaces and edges. I've just tweaked it a little bit and added the base for the ApexEVO frame. !IMPORTANT!{begin} The gap between the front propellers and the mount is about 6mm. I haven't…
Just thought it would be nice to print something useful as a calibration test. So I designed this little (20x20x20)mm dice. If you remember how you aligned it for printing you can use it like the other xyz-calibration cubes. ;) Update…
A simple towel hook for bathroom heaters. Tube diameter 20mm, distance (free space between tubes) 20 mm, center-to-center distance of the tubes 40 mm
Lightweight and small front bumper for the DarwinFPV BabyApe Pro.
Filament indicator leds and slightly bigger holes
A small and lightweight mount for the 2,4Ghz Happymodel antenna on the BabyApe Pro.
A hook for attaching to 19 to 20 mm thick panels. No supports needed! The tab for the clamp is designed to print and work fine without supports.
A small and lightweight arm and motor protectors for the BabyApe.
Everything you need for good design is a pencil and a piece of paper. So whenever I have an idea I do a lot of sketching. For this I love my Kuru Toga pencil and I keep it right next to my sketchbook, wherever I go. But it's tip is very…
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
Christmas time is coming....! I recently printed one of the nice fractal-design tealights in vase-mode and thought about some other design. To design this bevel gear was obvious for a mechanical engineer! ;) I haven't tried using a real…
As I was taking pictures I wondered, where to put the lens cap of my camera. I thought that there had to be a place for it and so I designed this part. I also designed a 1/4 inch screw to fix it at the camera. When the lens cap is…
It should fit for the frame. Couldn't try it myself, so I hope it works. ;) There are two versions. Their only difference is the orientation of the hex stand-offs.
Handle for the Anbernic RG35XX Plus
I really like this project! Had to wait quite a while for the parts coming from China but when everything had arrived the build was done in some hours. It does not have much power but it flies quite good and you have a lot of stick time…
A simple towel hook for bathroom heaters. Tube diameter 25mm, distance (free space between tubes) 20 mm, center-to-center distance of the tubes 45mm.
Because the printing volume of my printer was too small for most of the spool holders here, I decided to design my own and to keep it simple. Means: both sides are equal, so just print two of these, push two 22x8x7mm ball bearings on the…
This design is a combination of the front and rear bumper for the TBS SourceOne V3 integrated with my antenna mount design for the Happymodel ExpressLRS ep1 antenna. This design is also a remix of the TBS Source One Accessories but this…
Whenever I needed to take my razor with me, I used to stick some tape on the blade, so that it was safe and the internal of my backpack as well. Obviously this wasn't the best solution and because of the fact that there is a 3d-printer…
I designed this bracket because the Chromecast-Audio needed a fixed place near the stereo. The hole on the top has a 10mm diameter, so a standard audio plug should fit in. The plug for the power supply isn't covered by the bracket. One…
Equipped with a caliper and a little bit of sensible guessing I tried to be as close as possible to the original part.
The hex-holes have a distance (center-to-center) of 32mm. Apex Evo Update(2023-01-05): I uploaded a new version of this design which has 30 degrees turned hex holes. (Especially for Mark and of course everyone else whose stand offs are…
I designed this adaptor for an old Lamello milling machine. The old connector for dust extraction was broken and needed to be replaced. Therefore I took the dimensions with a caliper from the machines exhaust. This is the second Version…
Printed in TPU For the Project Synthara
This design is a mount for the small 2.4GHz T-antenna of an ExpressLRS receiver. Similar to my other design: TBS SourceOneV3 ExpressLRS The holes for the standoffs have a diameter of 5mm and the distance between them is 22mm.…
An adapter for the 19mm wide AvatarPro camera to the 28mm wide frame of the TBS SourceOneV3. Printed in TPU for damping reasons. Uses 4-6 M2 hex-nuts.
Just a Apex-Style VTX SMA stubby mount for the pigtail. Added one version without the extra holes for the to screws but instead with a hole for a hex nut. Update(2022-03-14): Recognized that a 6mm hole for the version with just that hole…
This is my design for the standard GoPro mount feet.
Instead of printing the gap to install the antenna I decided to print the antenna pipe closed and do the cut myself after printing. Works fine!
There are two versions. The only difference between them is the extra cut-out for the recording-light above the front screen of the GoPro. Check that there is enough clearence between the camera body and the front propellers!
Whenever I needed to take my razor with me, I used to stick some tape on the blade, so that it was safe and the internal of my backpack as well. Obviously this wasn't the best solution and because of the fact that there is a 3d-printer…
Recently I bought this ingenious little tool. To protect my pocket and also the very sharp Allen key tips of the tool, I designed these litte caps, which are connectet by a strap. So you don't have to worry about where to put the cap…
For a university project we had to design parts for the OpenRC Truggy. Our group focused on generative deisgn with integrated functions for the rest of the chassis. We used Autodesk Fusion 360 and Autodesk Inventor. This part is our…
A colleague approached me with the question of whether I could design and print a new sole for his ski boot. After a quick search, I came across this model and was very glad that I didn’t have to create it from scratch. Since it was to be…
Just a qick and simple wall mount for the GepRC Cinebot30 in two versions. Sticked to the wall with some adhesive strips and secured with two nails, works good.
A light weight mount plate for a HD camera on the Smart35 frame.
I noticed a problem with the bracktes that click onto the frame. There wasn enough clearence at the sides of the frame between the frame and the table of the machine. This was a problem when I wanted to print without off-contact. So I…
This design is the TPU version of this: https://www.thingiverse.com/thing:4575223 For best results and a durable strap make sure the part is oriented at a 45 degree angle on the printbed. The layer orientation of the strap should NEVER be…
A version of my ExpressLRS antenna mount design. Should fit for the TBS SourceOne V5 frame. I don't own one, so I had to rely on specifications and other uploaded designs for this frame.
Light version with reinforcements on the narrow strips in the front and back. Tilted at a 20° angle.
Kind of second life for the camera and vtx module of one of my broken Mobula7. It's designed to be stand-alone attached on every rc vehicle you want to control in fpv mode. Just solder a Molex 2.0 2 pin plug to the module and glue it in…
One of the hook brackets of the original part of my C4 broke off and I decided to design this because I think sooner or later it would happen to a replacement part, too. So I wanted to be able to just print another one. I've tried to be…
This is for the Happymodel EP1 and EP1-Dual antennas. As shown in the picture you can make a small cut to make inserting the antenna easier.
This hook is for your solid shower gel / solid shampoo. It has enough clearance to the wall to allow good handling and drying of the soap.
I liked Grena's design and found LegoRJ35's remix quite useful to store and organize my nd-filters. BUT the lid came off too easily, so I decided to improve the design by adding a little interlocking seal.
This design is for the Flywoo action camera case V2.1 for a naked GoPro. I've uploaded different angles. Starting from 10 degrees to 35 degrees, with 5 degree increments. To make it easier to identify the angle once printed, it is stamped…
One version has a closed top but a quite short thread. The about one and a half convolutions should be enough to hold it in place. If not, you can add some superglue to assemble it. Or you can use the one with the open top part and longer…
A copy of the spacers for SSDs with the 2230 formfactor.
Didn't had much time so I've not tested it, yet. But it should work. ;) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 20% Filament: 3DWarHorse TPU
Because the soap bottles are that big I designed and printed this adaptor to connect the cap of a Pril bottle to a small glass bottle with a Twist-Off thread (size TO 38). While it fits good it is quite leaky so I sealed both threads with…
This design comes in two versions. The story behind it: Originally I designed the fender extension to have that rounded trailing edge. However my first print ran into a little problem and the parts were cut off a couple of millimeters…
This design is a cover for the Ikea exhaust pipe with a diameter of 150 mm: https://www.ikea.com/de/de/p/nyttig-tub-150-flexibles-abzugsrohr-fuer-geblaese-90250259/ Between the two parts you can add an extra filter membrane.
Just another cap for razor blades...
This design is a zip tie fixed camera mount for the Caddx Orca. It has a 25° angle. One version has extra holes for the zip ties if the top plate is smaller.
Like the " MarkerClip-double " but a single version for an Edding3000 or similar markers
Another version of my design for an antenna mount for the TBS SourceOneV3 Frame. This one has extra protection for the antenna tips. Like shown in one of the pictures you have to add a little cut to more easily insert the anteanna tips.…
I don't have such a frame so I can't test the mount. I hope it fits! There are two versions. One with an angle of 25deg and the other one with an angle of 30deg.
I wanted to design an easy-to-use hook for kitchen towels. It had to work with one hand and without any loops on the towel. It works o.k. but yet it is not as perfect as I would like to have it. Category: Kitchen & Dining
The light version of my mount for the naked GoPro by Flywoo You can use this in combination with a mount like this: https://www.printables.com/model/1215528-geprc-smart35-hd-camera-mount-plate
This is more an additional part rather than a remix for this really cool design by krayvis ! https://www.thingiverse.com/thing:3704406 Due to conversion issues (inch to mm) I scaled his design up and printed it. Then I needed a dish where…
Because I had an old Sony Vaio laptop laying around with no use I decided to recycle some parts of it. I designed this speaker housing for the two tiny speakers which have a diameter of 36mm. With clear two componend glue I attached the…
The original camera mount was designed for a GoPro Session and the Caddx Orca did not fit in that perfect. After I created one version with a too thick frame in front of the lens and because of the extreme wide field of view of the Orca,…
This hook for my Giro bicycle helmets I designed to fit the RocLoc 4 and RocLoc Air Fit belts of the helmets. I fixed this hook with a double-sided adhesive strip to the wall unit.
Just a small clip for two Edding3000 markers. The pictures show my first printing of this design. After printing I realized that I did a lucky guess with the toleranzes and maybe it doesn't fit that well, printed on an other printer.…
The TBS Triumph Pro antenna is quite long so I thought it should be mountet inside the frame. It works good and it takes load off the connector by supporting the antenna at two points.
The frame is the same for all three versions. Just the mounting points vary.
I don't have such a frame so I can't test the mount. I hope it fits! There are two versions. One with an angle of 25deg and the other one with an angle of 30deg.
Do you want to have this Mariokart like view for your videos when you are kart racing? Then this one is for you! It was a little rough quick and dirty build but it works perfect. I have just merged one of my earlier GoPro mounts to an…
You can download the Synthara frame here: https://www.printables.com/model/1216454-project-synthara-generative-design-fpv-drone-frame
You can use this in combination with a mount like this: https://www.printables.com/model/1215528-geprc-smart35-hd-camera-mount-plate
These are all currently available results.
