Counting matching models…
This is a model of Cinderella's Castle from Disney World. This was originally made for the FlightGear open source flight simulator a while back. If you know where to find it and you try out FlightGear it should still be there. Scaled to…
Summary NEW VERSION This new version makes the Speaker Ring Generator much easier to use in real projects. You can now choose how the ring mounts: either with normal mounting holes within the ring or with mounting tabs around the outside,…
Summary NEW VERSION - Now includes mounting tabs!!!! OVERVIEW A speaker mounting bracket for 5x7/6x8 and 6 x 9 speakers (the STL placeholder is only an example). My goal is to enable 3D printing of speaker adapters for a wide range of…
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
This is a low poly B-52. It is modeled after the static display at the gate of Offutt AFB in Nebraska. Category: Vehicles
This is the 4th sliding spice rack in a series. After seeing the size of the 100mm version and the 150mm version next to each other decided to make this 125mm version. For this version, the basket is 125mm wide. You will need a large…
Lincoln Memorial in Washington DC UPDATE: 1/28/23 Fixed some issues with the bottom model, (now version 3), and changed the columns to this thing https://www.thingiverse.com/thing:2859447 UPDATE: 1/21/23 I have redone this model so it…
This is a tire tread depth gauge you can use to test your tires to see if they need replacement. If you live where it is wet you are good until your tires are at 4/32" or 3mm of tread depth. If you live where it snows it is recommended to…
Offutt AFB static display aircraft B-17 Homesick Angel Category: Vehicles
Remix of Adimlab center mount LCD case (original version by Electroskippy) to fit a Bigtreetech TFT35 E3 V3 hybrid touch screen. Mount to center of printer using 2, 4mm x 10 screws and 2, 4mm extrusion nuts. Category: 3D Printer Parts
Here is a remix of a round speaker grill so a bar grill style can be made for speaker protection. I liked the orginal design, but I didn't want the speaker to be fully surrounded. I coundn't find any other designs for a bar type grill so…
Another plane I made, but this was purely for fun! How I Designed This Modeled using AC3D Category: Vehicles
A bracket to build woodworking projects like a 3D printer stand using 2x3 lumber. These brackets are strong, but they are not meant for large heavy duty projects. This design is based on many of these style brackets found in hardware…
This is a linear rail mounting system for the Adimlab Gantry-S printer. This uses the Adimlab x carriage plate so you can keep the original hotend if desired. Use a 300mm MGN12H linear rail. You may also need a new belt. An x-axis belt…
I made this box for my Adimlab Gantry-S printer and the MKS Robin Lite board that it ships with, but it will also be useful for a variety of printers and boards. This is designed to fit all the electronics (Pi, buck converters,…
Note that this model is in inches. This is a customized speaker mount adapter for a 2015 Kia Sportage. This is designed to fit 6.75 inch speakers. It was made using https://www.thingiverse.com/thing:2924217 . I had to add mount tabs to…
The Jefferson Memorial in Washington DC UPDATE: 20190519 Printed out and I didn't like the scaling. Increased in size 75%. If you scale it down don't go any further than 25% smaller or the columns will be too small. UPDATE: 20190518 When…
This is a remix of Chess Board thing by TwistedDaylight. I liked the design and I thought it could be easier to print and would be more substantial. I had a few issues with getting it all to fit. I had to resize the yellow tiles so they…
A 2D converted to 3D Fleur De Lis! Can be used for wall art, keychain, coaster etc. Category: 2D Art
I was looking for a D&D dice tray for a beginner. Found one that was labeled, but it was a little bit big. Slightly resized so the dice slots are a little smaller, moved the pen tray to the front and made the bottom a little thinner.…
Made this for a family member, but wanted to print it in multiple colors so I split up the original thing into parts for printing. The orange parts of the basketball needed to be trimmed in order to fit. They could be scaled down a little…
I made this model a while back for a flight simulator program so I could fly around Omaha and see the sights. We had a little contest at work to see who could pick the CWS winner. We wanted a trophy so I offered to 3D print this. There…
The Louisiana (Mercedes Benz) Superdome! Category: Buildings & Structures
Here's another state capitol building I did. Category: Buildings & Structures
A filament sensor mount to relocate the filament sensor for the Ender 3 V3 Plus. This is good if you remount the spool holder to the top of the printer. In my case the spool is mounted to the right of the printer on my printer stand using…
This is a model of the Saunders Roe SRA1 from the late 40's I made for a flight simulator. It's a jet fighter that can land and operate on water. Very interesting aircraft and it had impressive performance. Never operational, but several…
A customizeable tweeter speaker adapter. You will need OpenSCAD to customize the model.
This is a drink coaster I made using a picture and converting it to 3D using OpenSCAD. I used the techniques from https://www.instructables.com/id/Convert-any-2D-image-to-a-3D-object-using-OpenSCAD/ Category: 2D Art
Plane used in James Bond movie The Man With the Golden Gun Category: Vehicles
This is a large 12x16 frame I made for a particular art project that will be sandwiched between plexiglass and lit up with RGB LED lighting. I've posted a picture of the finished piece. Unfortunately; I had to downsize the picture a lot.…
UPDATE: 5/28/25. Added pictures. It was so big had to take it outside. UPDATE: 5/10/25. I have completed printing the entire model and the tolerances are good. In the process I have made a second design of the music tray with diamond…
A 3D model of the Adimlab 3D printer to use for prototyping of modification designs. The STL is a placeholder. The 3D model is included in .obj, .dxf, & .3mf format. Some parts are missing and yet to be modeled but can be used as-is for…
A Rush tribute coaster made from a Rickenbacker bass and Rush logo! Category: Art
A stand to hold up Star Wars Slave 1 - Lego 20th Anniversary Edition. This is a remix from https://www.thingiverse.com/thing:4384184 This remix thickens the base arms by 1mm and tapers the column. I printed in PLA and the top part that…
This control box could be used with other printer's with some mods for the control board hole positions and the LCD panel to make it fit. This is a well ventilated control box to fit both the LCD panel and the PCB board, but not the power…
Summary 12/21/25: Made lots of minor changes to help with consistency in the files. Improved the fit test file for all shapes. This will allow you to fine tune the driver baffle parameters for each driver individually without having to…
Summary A parametric speaker spacer mounting bracket. Use to add on to speaker adapters so they can be installed in a vehicle. To add these on, use either screws/glue or use a 3D modeling program like Tinkercad to add them to the speaker…
This is an enclosure for the Robin Lite and the MKS Nano for the Adimlab Gantry-S printer. This will fit in the stock location and offers improved cooling ability and room for the board. Category: 3D Printer Parts
This filament spool holder is designed to be easy to use. It rolls smoothly on bearings placed in a Y configuration. It's quick and easy to change the spool and it mounts on the printer top 2020 extrusion. To put this together you will…
This is a cookie cutter in the shape of Army Sgt rank. It's scaled at roughly 65mm x 65mm. Enjoy! Category: Kitchen & Dining
Iconic building in Dallas designed by I. M. Pei Category: Buildings & Structures
World Trade Center in New Orleans. Currently Four Seasons Hotel and private residence. Category: Buildings & Structures
A model of the x carriage plate of the Adimlab Gantry-S printer.
Greta Van Fleet, Anthem of the Peaceful Army coaster! Tried to get the roses on here, but they had too much detail to print so small. This is 5.5 inches in diameter or 139.7mm. Category: 2D Art
Filament guide for Adimlab printer or other printer's that use the Mk8 extruder. This was not designed by me. I'm posting this here as a convenient place to download for others. Category: 3D Printer Parts
Here are some various remixed models I have modified while I have been putting my Layerfused X301 printer together. Most of these have to do with the hotend, but not all of them. Here is a link to the Layerfused website.…
Here is my take on a 10 inch hexagonal speaker grill. Use some short screws and glue to put the grill together. Enjoy and rock on!!
This is a remix of the brilliantly designed "Easy Universal Z-Braces for CR-10 / S / S4 / S5" by jonathanlundstrom https://www.thingiverse.com/thing:2805226 . This is remixed to adapt it to an Adimlab printer, but this remix, the original…
Here's a coaster I made from my earlier Fleur De Lis thing. Can also be used for wall art. Category: Decor
This is a keychain of Rush's Fly By Night album cover. I've included the STL for both the bottom and the top or if you'd like I have also included the GCODE file to print both at the same time. The idea is to print them both and glue them…
This is the YouTube Frog Leap Studios frog logo. The Frog Leap Studios channel can be found here https://www.youtube.com/channel/UC98tcedR6gULv8_b70WJKyw . Leo is an amazing talent! He has taken many popular songs and remixed them into a…
This is a remix of CR-10 Y-Axis Belt Tensioner Remix" by skartz. I changed as little as possible as I really liked the design. The things I did change were to make this work on the Gantry-S As it turns out I had to change a bit more than…
This is a remix of the original FB Group Adimlab Gantry printer X-axis belt tensioner. This improved version thickens the base and top and adds a second triangular brace on each side for improved stiffness. The pulley housing area is…
Description: This is a new bracket and belt holder to mount the OEM Y Carriage for the Adimlab printer. It is based on designs by a member of the Adimlab Facebook Group. This design is a little different from that design in that it uses…
A United States Air Force Staff Sergeant (SSgt) rank cookie cutter. Not sure if this is the right depth to make a good cookie if you try it out please post a make of the cutter and the cookie! Category: Kitchen & Dining
Rush Fly By Night or 2112 phone or tablet holder with fretboard stand! Print both pieces and glue the background piece onto the stand. UPDATE: 4/12/21 Added the original base back into the files. UPDATE: 1/18/19 Added version 3 of the…
This is a quick change spool holder. I didn't want to have to unbolt the spool every time I changed out some filament. I also tried a spool holder that sits on top of bearings, but when you got close to the end of the filament, the spool…
This is the first state capitol building I modeled. It looked like a typical capitol building and didn't look too hard to model. Category: Buildings & Structures
Replacement bracket for the Adimlab printer Y stepper motor. The factory bracket is thin and tends to bend easily. Some folks have even had the mount crack. Use one of the holes on the top side in one of the original spots to put the…
Saw one of these and decided to try making one. Instead of using a cabled weight decided to use a thingiverse object as the weight. In this case I remixed a Mickey Mouse box to an appropriate height…
Model of the New Orleans Arena or the Smoothie King Center. Home to the New Orleans Pelicans! Category: Buildings & Structures
An additional mount bracket for the Z motors on the Adimlab Gantry printer. Hardware: 2 M3 x 12 screws for the motor 2 M4 x 8 screws to mount on the 2020 extrusion 2 M4 t-nuts Install: Put M3 screws in Put on motor and start M3 screws…
This is a remix of "ADIMLab Z-Axis End Stop Adjustment" by Rabbit1210 to adapt it for the Adimlab Gantry-S 3D printer. Remove the factory bracket and the z stop from the bracket. For the knob, you will need an M3 x 40 screw, one M3 nut,…
A simple box to use to turn on the printer. Made to mount on the side of the 2020 extrusion. This uses the Adimlab printer switch that came with the printer. This is a nice for folks who put their printer up on taller legs. Print as…
This is a remix of the 40mm fan version of the Adimlab Killer Cobra Kooler ( https://www.thingiverse.com/thing:3315784 ). The fans needed for this should be 40mm x 40mm x 10mm. 20mm thick fans will not work without further modifications.…
This is a simple holder for the Keurig use your own grounds pod so that it doesn't fall over when trying to put coffee into the filter on your counter. Enjoy!
Made these to cover up the V-Slots to keep dust, dirt, filament and anything else out of the V-Slots. This is customized to fit the base of the Gantry-S. I used the smallest size from the source thing and they fit well. Here are the…
This is a new version of the Adimlab Gantry-S adjustable Z-Stop with gears for the adjustment. Please see https://www.thingiverse.com/thing:4240240 for installation instructions. Category: 3D Printer Parts
This is a remix of https://www.thingiverse.com/thing:1976654 , but sized to fit an M3 wingnut. It's shorter than the original on both the bottom and top sections and is sized to fit a M3 wingnut. I made it for the Y-tensioner on my…
The Y stepper motor metal bracket on the Adimlab i3 printer is very thin metal and it could bend easily. I also don't like how it is mounted only on the top of the 2020 extrusion which lends itself to come loose. This is designed to be…
This is a remix of the 90 degree 2020 Filament Guide by Evan VW. I made the loop a little thicker and added a small hump to allow for the Adimlab 2020 plastic trim that is on the extrusion. Update: Increased the scale by 2% as Evan VW…
The Adimlab Z lead screw bearing support has been remixed. This new version is called "AL_Quiet_Z_V4.STL". The original Adimlab metal brackets allow the z lead screws to move as they should , but they tap against the metal which is…
This is a 40mm fan grill cover for the ADIMlabs i3 printer. The bottom edge is cutoff of the remixed "40mm Fan Clip-On Guard/Grill" thing so it will fit on the ADIMlab printer. It just slides on and yakulis did a great job designing this…
This is a BMG extruder and E3D V6 hotend mount for the Adimlab Pro printer. This uses the backplate that comes with the printer so there is no modification needed there. If you want to add this mod to an Adimlab Printer with linear rails…
Over time I have collected several parts for the Adimlab i3 Gantry printer. Here is a cover for the extruder with a mount for a auto leveling sensor built into it. Category: 3D Printer Parts
This is a surround sound speaker system I've been working on for a while. For now this is just to show the parts of the speaker enclosure. When I get one assembled I'll post some pictures This uses 4 small 16 ohm Samsung speakers from…
This is a remix of: Petsfang Direct for E3D Titan Direct Extruder for Micro Swiss/ E3Dv6/ or Stock CR10 & Tevo Tornado hot ends. The files are on Thingiverse at: https://www.thingiverse.com/thing:2907538/files This remix adapts the…
This is a simple guard to put on the top frame of a printer so a cable draped over the top will not rub on the sharp corners of the 2020 extrusion. 9/2/20: Uploaded version 2. Now with push-on fit and with side stops. Print Settings…
This is a remix of cmelson's Adimlab modifications parts cooler so it will mount from behind with magnets like the popular cobra cooler does. The heatsink duct is a very slight remix of "E3D V6 Fan Duct for MendelMax standard X Carriage".…
This is a remix of the very good "ADIMLab Control Box Front Panel" by FerretWorx." This remix adds the SD card slot; adds a flat front instead of ending at a point and makes the logo a little more pronounced along with some other minor…
This is a bracket to enable mounting the Universal Spool Holder Gen 2 onto 2x lumber. This is used in conjunction with https://www.thingiverse.com/thing:2122402 Use a 8mm x 200mm allthread. Place an 8mm washer on both ends next to the…
A spacer to line up the stock Adimlab Gantry-S filament detector with a WINSINN dual gear extruder. Category: 3D Printer Parts
My version of a no-touch tool. Something simple and elegant. It can be put on your keychain for ease of use. Thanks, Enjoy! Category: Hand Tools
This is a new spool holder made to fit on top of the Adimlab control box. It is remixed from "Updated Creality CR-10 Bearing Filament Spool Holder (V7)" https://www.thingiverse.com/thing:2440814 . It looks like a brilliant design and I…
A drink coaster with the Adimlab Printer logo on it (or use to give your printer a little love) ! For anybody that wants the logo I also included the STL file for it. FYI the make showing the thing on an Adimlab printer was scaled to 50%.…
This is the original X Tensioner design. Recommend you go to the new improved design with stouter bracing and a thicker pulley. https://www.thingiverse.com/thing:3625832 This is a design by Karl from the Adimlab Facebook page. When I made…
This is an auto-leveling sensor mount for the Adimlab i3 Gantry printer. This mount is for inductive or capacitive type sensors of various sizes. This is an "open" design instead of covering up the whole extruder head like the Adimlab…
My remix of PSU cover from Adimlab modifications. This will also fit many other PSU's that are 50mm in height: https://www.thingiverse.com/thing:3363632 The front of the cover has a lid you can remove to get to the PSU terminals easier.…
A sign to showoff the Adimlab logo and give your printer some recognition! The Gcode with the M600 command so you can change the filament color is included. Print Settings Printer: Adimlab i3 Gantry Rafts: No Supports: No Resolution: 0.2…
These are some feet that are designed to fit over the feet that come with a 3D printer. I made these specifically for the Adimlab Gantry-S printer, but they should easily fit on many printers on the market. They have two parts. A top and…
This is a remix to make this part compatible with the older black board Adimlab gantry printers. UPDATE: 8/28/19 made some minor fixes to the model. Printing a test model in progress. Category: 3D Printer Parts
This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the Adimlab printer. Uses two 3mm x 8 scews and two 3mm nuts. You will need to remove the cable chain put this bracket on…
This is a Y stepper bracket for a 2nd damper that can be added along with my Adimlab Y stepper mount https://www.thingiverse.com/thing:3127999 . This thing should also work with the original Adimlab bracket. Either way its function is to…
This is a spool hub I remixed to fit my Adimlab i3 printer. The Adimlab i3 Gantry printer older version came with its own filament holder and I remixed the Quick Change Universal Spool Holder by making the center hole of the hub larger.…
This is to put on top of a 3D printer control box. If you have your filament spool on top of your control box this will keep it from sliding off. I designed this for my Adimlab printer but with a little tweaking will work for others. Two…
A simple heatbed knob for M3 wingnuts. It is 40mm in diameter. The wingnut knobs for heatbeds I have found are pretty small, so I made a bigger one.
These are all currently available results.
